Products in Power & Utilities

savE® OM48 is an inorganic phase change material.

savE® HS23N is an inorganic phase change material.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

CALTRAN™ 60-30 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

VBASE® 68U base oil provides exceptional hydrolytic stability, efficiency, and compatibility to enable the formulation of high-performance Environmentally Acceptable Lubricants (EALs). VBASE Oil is based on new Secondary Polyol Ester™ technology.Increased System Efficiency - High Viscosity Index and High Shear Stability Enable Reduced Flow Losses and Viscous Drag Enhanced Fluid Lifetime and Reliability - Excellent Thermo-Oxidative Stability, Varnish Resistance, and Hydrolytic StabilitySuperior Compatibility - Compatible with all major base oils and sealsEnvironmentally Acceptable - Biobased, Biodegradable, Non-Toxic, Non-bioaccumulatingUSDA Certified Biobased, NSF HX-1: Safe for food contact

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

savE® OM08 is an inorganic phase change material.

savE® OM37 is an inorganic phase change material.

CALTRAN™ N60-30 C50A insulating oils are developed using high quality base stocks to deliver a product that provides excellent performance in electrical service. CALTRAN C50 insulating oils are designed and manufactured to provide cooling and insulating properties as well as promote resistance to oxidation and sludge formation.

savE® OM55 is an inorganic phase change material.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

Wollastonite is a naturally occuring, non-metallic, acicular (needle-shape) mineral.

CGSTAPE - 6358 is a glass cloth tape with a rubber pressure-sensitive adhesive. This tape is used to electrically insulate and provide mechanical protection at temperatures to 130°C. This tape provides insulation and solvent -resistant protection for use as coil cover, anchor, banding and core, layer and crossover insulation.

savE® FS30 is form stable phase change material, liquid PCM embedded in polymer matrix.

CGSTAPE - 6558 is a glass cloth tape with a high-temperature thermosetting silicone adhesive. This tape shows excellent dielectric insulation properties and high heat resistant, widely used for electrical insulation for electrical equipment in the fields of petroleum drill- ing, such as motors.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

PFI C Flakes are offered for use in applications ranging in many applications including corrosion resistant coatings, polymer reinforcements and specialty pigments. The PFI T Flakes have been shown to increase the chemical resistance of coatings, improve the dimensional stability of moldings, and reduce surface waviness while providing a unique substrate for pigment deposition. The PFI C Flakes have the ability to be engineered in a wide range of specifications offering new and unique applications.

CALTRAN™ N60-15 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

savE® FS65 is form stable phase change material, liquid PCM embedded in polymer matrix.

CoolMag™ 29 LV is a thermally conductive composite PDMS based elastomeric compound of encapsulant two component system, designed for Power Electronics in general and for Automotive, especially in Electrified Vehicles with multiple functionalities:Heat Transfer, reduction of hot spots and minimizing average temperature of systemsElectric IsolationMechanical protectionFlame and fire protection (Retardant and Extinction)

savE® HS89 is an inorganic phase change material.

RIANOX® 116 is an antioxidant for lubricating oil or grease

savE® OM46 is an inorganic phase change material.

savE® HS30N is an inorganic phase change material.

savE® OM21 is an inorganic phase change material.

VBASE® 46U base oil provides exceptional hydrolytic stability, efficiency, and compatibility to enable the formulation of high-performance Environmentally Acceptable Lubricants (EALs). VBASE Oil is based on new Secondary Polyol Ester™ technology.Increased System Efficiency - High Viscosity Index and High Shear Stability Enable Reduced Flow Losses and Viscous Drag Enhanced Fluid Lifetime and Reliability - Excellent Thermo-Oxidative Stability, Varnish Resistance, and Hydrolytic StabilitySuperior Compatibility - Compatible with all major base oils and sealsEnvironmentally Acceptable - Biobased, Biodegradable, Non-Toxic, Non-bioaccumulatingUSDA Certified Biobased, NSF HX-1: Safe for food contact

savE® HS58 is an inorganic phase change material.

CALTRAN™ 60-08 transformer oils have excellent dielectric properties, high thermal stability and good resistance to oxidation. CALTRAN transformer oils fully meet ASTM D3487 specifications for Type I and Type II mineral insulating oil in electrical apparatus.

savE® HS3N is an inorganic phase change material.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

CGSTAPE - 5158 is a polyester film backing with an acrylic adhesive provides flexibility, solvent resistance; puncture resistance and excellent long term aging characteristics.

savE® HS65N is an inorganic phase change material.