Products in Marine Coatings: Corrosion Inhibitor

BECKOPOX™ EM 2120w/45WA is a dispersion and liquid within the epoxy and epoxy derivatives chemical family, functioning as a binder, resin, and corrosion inhibitor under CASE Ingredients. Targeting automotive and transportation, paints and coatings, and building and construction sectors, it stands out with APEO-free, formaldehyde-free, and VOC-free labeling. This product offers corrosion resistance, a balanced set of properties, low flash rust, and matting features. Suitable for 1K coatings, epoxy coatings, primers, and waterborne coatings, it is compatible with epoxies and adheres well to metal and wood substrates.

Jalpon™ 1200A is a solvent free, gelled calcium sulfonate compound in a mineral oil diluent. It is designed to allow the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200A will deposit an oily film. Jalpon™ 1200A contains a wax component for improved film integrity and resistance to water in thin film applications. Jalpon™ 1200A is easily emulsified for use in waterborne rust preventives and coatings.

Jalpon™ 1200 is a solvent free, gelled calcium sulfonate in a mineral oil diluent. It is designed to allow for the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200 deposits an oily film. It is also easily emulsified for use in waterborne rust preventives and coatings.

K-Ox™ 9080-55HF and 9080-70HF are economical calcium soaps of oxidized petrolatum used in rust preventive compounds. K-Ox™ 9080-55HF and 9080-70HF have been reduced with solvent to reach non-volatile contents of 55% and 70% respectively. They will deposit dark amber waxy films upon evaporation of the solvent. They are especially synergistic with gelled calcium sulfonate such as Kimes Technologies’ Jalpon™ products.

K-Ox™ 9080-55HF and 9080-70HF are economical calcium soaps of oxidized petrolatum used in rust preventive compounds. K-Ox™ 9080-55HF and 9080-70HF have been reduced with solvent to reach non-volatile contents of 55% and 70% respectively. They will deposit dark amber waxy films upon evaporation of the solvent. They are especially synergistic with gelled calcium sulfonate such as Kimes Technologies’ Jalpon™ products.

The Fine Zinc Powder LARVIK SUPER FINE grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder FH 500 grade is highly recommended for organic or inorganic paints.

The Fine Zinc Powder LARVIK SUPER EXTRA grade is highly recommended for organic or inorganic paints.

ADDAPT Anticor A40 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxy Amides. All constituents are EINECS registered and comply with the FDA regulation.

INHIBISPHERES® ZS is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZS is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® ZS (ISZS) releases quickly to slow corrosion in the scribe (250 hours).

INHIBISPHERES® ZB is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZB is porous silica particles containing encapsulated corrosion inhibitors. Low levels of INHIBISPHERES® ZB give superior performance when compared to a traditional corrosion inhibitor on steel.

ADDAPT® Anticor A84 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

The Fine Zinc Powder LARVIK STANDARD 7 grade is highly recommended for Paints and Plating.

Pigmentan PIGMENTAN EMX is a low cost, high performance, environmentally friendly, direct (1:1) substitute for basic Zinc Phosphate. It is suitable for use in primers for both ferrous and non-ferrous metals. Pigmentan MX is non toxic and contains no Zinc, Chrome, or other heavy metals, and does not require hazardous labeling.

Ultraflon FP-15 series represent premium, fluorinated ethylene-propylene powder (FEP) additives. FP-15 is characterized by moderately high molecular weight. It demonstrates a lower melt flow index (MFI) when compared to the Ultraflon FP-20, but higher than that of FP-IO. FP-15 is manufactured from ultra-high purity FEP, and micronized in clean conditions to preserve its pristine form.

Pigmentan PIGMENTAN 465M-FG is a premium environmentally friendly anticorrosive pigment. Suitable for thin film solvent based primers. Excellent cost effectiveness and performance.PIGMENTAN 465M-FG is useful both for low film weights, and for easier dispersion of the anti-corrosive pigment into the paint system.

Delaphos® 2M is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

The Fine Zinc Powder 4P/16 grade is highly recommended for organic or inorganic paints.

Genesee Polymers' GP-6 SILICONE FLUID is an amine functional silicone polymer with the following structure where x = 100 and y = 4: The amine-alkyl functionality of GP-6 provides a versatile reaction site for the synthesis of a variety of functional silicone polymers and silicone-organic copolymers. The polar amine groups in GP-6 SILICONE FLUID also demonstrate high affinity for many substrates, suggesting use of GP-6 in textile lubricants, plastic and rubber release and lubrication, and in car polish formulations. GP-6 SILICONE FLUID is compatible with dimethyl silicone fluids, and with aliphatic, aromatic and chlorinated solvents.

Delaphos® 4 is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

CERAMISPHERE® H (CSH) reduces the pitting on aluminum in NSST at low levels.

ADDAPT® Anticor A65N is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids Salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

The Fine Zinc Powder FH 1000 grade is highly recommended for organic or inorganic paints.

Ultraflon FP-20 series represent premium, fluorinated ethylene-propylene powder (FEP) additives. FP-20 is characterized by comparatively lower molecular weight. It demonstrates the highest melt flow index (MFI) when compared to other grades within the Ultraflon FP series additives. FP-20 is manufactured from ultra-high purity FEP, and micronized in clean room conditions to preserve its pristine form.

INHIBISPHERES® A is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® A is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® A is metal-free. INHIBISPHERES® A is added at different levels extend the duration of corrosion protection in the coating.

Delaphos® 2 is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

Genable® 3000 dispersion consists of graphene nanoplatelets stabilized in epoxy resin (EEW = 190g/eq.). The graphene nanoplatelets are a synthesized form of graphene produced by a patented process. A formulation-ready Genable® epoxy resin, Genable® 3000 dispersion has been developed to enhance the anti-corrosion performance of coatings on steel substrates by the use of a patented active, non-metallic anti-corrosion additive.

ADDAPT® Anticor L 4783 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of PolyHydroxycarbonate and Silanes. All constituents comply with the FDA regulation.

The Fine Zinc Powder 4P/64 grade is highly recommended for Paints and Plating.

The Fine Zinc Powder FH 400 grade is highly recommended for Paints and Plating.

INHIBISPHERES® B is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® B is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® B is metal-free. INHIBISPHERES® B release quickly to prevent corrosion in the scribe (1000 hours).

ADDAPT BioWet 60 is a solvent free, ready biodegradable Glass Adhesion promoter and Glass Corrosion inhibitor for aqueous systems on glass substrates. A proprietary blend of PolyAlkylene Glycols and Polyhydroxy – Amide. All constituents are EINECS registered and comply with the FDA regulation (incidental contact with foodstuff).

Ultraflon FP-10 represent premium, fluorinated ethylene-propylene powder (FEP) additives. FP-10 is characterized by comparatively high molecular weight. It demonstrates a lower melt flow index (MFI) when compared to the other grades within the Ultraflon FP series, reflecting its higher molecular weight. FP-IO is manufactured from ultra-high purity FEP, and micronized in clean room conditions to preserve its pristine form.

The Fine Zinc Powder FH 800 grade is highly recommended for organic or inorganic paints.

Ferrocor Flash is a water-soluble corrosion inhibitor for Ferrous and Zinc rich substrates. It is a proprietary blend of Phosphate salts and Phosphonoxy esters. All constituents with the FDA regulation.

Genesee Polymers' GP-596 is a 28% active epoxy functional silicone polymer in solution. The epoxy functionality in GP-596 allows for rapid cross-linking with standard amine curing agents. Selecting the proper curing agent is dependent on application techniques, pot life requirements, cure conditions and physical properties needed.Cured coatings formed from GP-596exhibit greater elongation, higher impact resistance and more flexibility, than coatings formed from standard bisphenol A type resins. This increased flexibility allows for greater adhesion to coated surfaces, resulting in improved durability.In addition to the tough coating properties of GP-596, the presence of the unique silicone-epoxy copolymer imparts non-stick and rust inhibiting characteristics as well. This strongly suggests applications involving protection of ferrous and nonferrous metals exposed to extreme abrasion conditions, or corrosive atmospheres.GP-596may be formulated with pigments, thickeners, dispersants and other additives as needed to yield finished coatings. The technology of formulating is closely related to standard epoxy resin coatings applications.