Products in Off Road & Commercial Vehicle Coatings: Solventless & Hi...

SYNTHALAT A 147 HS is a hydroxyl group containing polyester and acrylic resin. Used in combination with polyisocyanates for air- and ovendrying 2-pack high-solid clear- and pigmented top coats for metals and plastics with high mechanical properties, high gloss and body, good weather- and chemical resistance.

SYNTHALAT A 149 HS is a hydroxyl group-containing, high-solid, polyester-containing, acrylic-resin. Used in combination with polyisocyanates for air- and ovendrying, 2-pack high-solid clear- and pigmented top coats for metals and plastics with high mechanical properties, quick physically drying, high gloss and body, excellent weather- and chemical resistance. < 420 VOC at spray viscosity. 

Domacryl 5109 85 BAc/Ac is a very high solid reactive hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack systems for automotive refinishing and general metal coatings (clear and pigmented top coats).Features & BenefitsFor very low VOC formulations (< 300 g/L)Best drying speed / pot-life ratioVery good balance between hardness and flexibilityExcellent mechanical propertiesSuperior outdoor durability

Domacryl 5485 75 BAc is a highly reactive hydroxy acrylic resin developed for room temperature drying or forced drying two-pack systems for automotive refinishing (clear and pigmented top coats). This resin is suitable for DTM (direct-to-metal) application. Domacryl 5485 75 BAc has 10% bio-based content on solid resin. Avaliable also in MAK solvent.Features & BenefitsBest for direct-to-metal (DTM) coatingsExcellent mechanical propertiesWide compatibility range10% biobased content on solid resin

Domacryl 5245 75 BAc is a premium hydroxy acrylic resin with very long pot-life and super-fast hardness development. The resin is designed for TOP PERFORMANCE 2K PUR air or forced drying system in automotive, ACE and general metal top coats. The bio-based content is 17% of the dry matter by the Carbon-14 method.Features & Benefits17% biobased on solid contentBest drying/potlife ratioExcellent mechanical propertiesVery good gloss retentionSuperior outdoor durability

Domopol 5200 75 BAc is a special purpose resin developed to improve adhesion of paints to various substrates. This resin is also suitable for high solids coatings formulations.Features & BenefitsImprove adhesion of paintsAdhesion improvement on aluminum, steel and galvanized steeSuitable for high solids coatings

Domopol 6044 96 BAc is a saturated polyester resin developed for 2K high solids polyurethane coatings. This resin can also be used as a combination resin for hydroxyl acrylic resins to reduce VOC and/or viscosity in industrial finishes, protective coatings and car refinish.Features & BenefitsHigh solid PU coatingsGood flexibilityExcellent chemical resistance and durability

Domacryl 5117 70 BAc is a highly reactive hydroxy acrylic resin developed for room temperature drying or forced drying of two-pack systems for automotive refinishing (top and clear coats) with excellent mechanical properties and superior outdoor durability.Features & BenefitsRoom temperature dryingForced dryingExcellent mechanical propertiesSuperior outdoor durability

Domacryl 5210 75 BAc is a standard highly reactive high solid hydroxy acrylic resin developed for room temperature drying or forced drying of two-pack systems for automotive refinishing (clear coats and solid color top coats) and industrial paints.Features & BenefitsStandard high solid refinish coatingsVery good balance between hardness and flexibilityExcellent mechanical propertiesSuperior outdoor durability

Domacryl 0768 Wa/PnB is a standard acrylic secondary dispersion designed as a polyol component in 2K PUR aqueous clear and top coats for car-refinishing, transport & ACE and general industry. Excellent applicability, resistance and appearance are achieved in combination with water-emulsifiable polyisocyanates, for example hydrophilically modified HDI-based polyisocyanates.Features & BenefitsWithout aromatic co-solventHigh glossUniversal use

Domacryl 5481 75 BAc a highly reactive hydroxy acrylic resin designed for room temperature drying or forced drying two-pack systems for automotive refinishing (clear and pigmented top coats), ACE and high quality industrial coatings.Features & BenefitsHighly reactive resinGood balance between hardness and flexibilityExcellent mechanical propertiesSuperior chemical resistance

Domacryl 5501 74 BAc is a reactive hydroxy acrylic resin designed for industrial top coats (clear and solid color top coats) and automotive refinishing.Features & BenefitsGood balance between hardness and flexibilityExcellent mechanical propertiesSuperior chemical resistance

Domacryl 0765 42 Wa/BG/SA is an acrylic secondary dispersion designed as a polyol component in 2K PUR aqueous clear and top coats for car-refinishing, transport & ACE and general industry. Excellent applicability, resistance and appearance are achieved in combination with water-emulsifiable polyisocyanates, for example hydrophilically modified HDI-based polyisocyanates.Features & BenefitsExcellent applicability, resistanceWithout aromatic co-solventHigh hardness

Domacryl 5428 70 BAc is a highly reactive hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack systems for automotive refinishing (top and clear coats) with excellent mechanical properties and superior outdoor durability.Features & BenefitsRoom temperature dryingForced dryingExcellent mechanical propertiesSuperior outdoor durability

Domacryl 5427 70 X is a reactive hydroxy acrylic resin developed for room temperature drying or forced drying of two-pack systems for high solid primers and finishes for industrial paints with very good mechanical properties and outdoor durability.Features & BenefitsStandard industrial coatingsVery good mechanical propertiesGood outdoor durability

Domacryl 5437 75 SA is a hydroxy acrylic resin developed for high solids STOVING automotive or general industry finishes in combination with melamine resins.Features & BenefitsStandard stoving industrial coatings

Domopol 6115 is a solvent-free polyester and polyether polyol developed for use in the formulation of 2K coatings. With this resin the coatings are tough and flexible, hard-wearing and chemically resistant.Features & BenefitsSolvent-free2K coatingsHard-wearing and chemically resistant coatings

Domalkyd 1351 75 BAc is a short oil alkyd resin modified with soybean fatty acids developed for low yellowing solvent borne coatings.Features & BenefitsLow yellowing solvent borne coatingsHigh solid resin

Domopol 6046 100% is a saturated polyester resin developed for 2K polyurethane coatings. This resin can be used as such or combined with hydroxy acrylic resins to increase solids content in industrial finishes, protective coatings and plastics coatings.Features & BenefitsSolvent-freeCombination resin for hydroxyl acrylic resinsHigh glossUV light and heat resistance and weathering resistance

Domalkyd 0545 40 Wa is a PU modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and onecoat paints for industrial application (air and forced drying) on wood, steel and aluminum with excellent gloss retention and elasticity. This resin contains no emulsifiers and may be thinned with water at all ratios. Coating systems based on Domalkyd 0545 40 Wa exhibit very rapid physical drying. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance (BMB) approach as certified by the ISCC PLUS).Features & Benefits60% biobased on solid contentSolvent freeRapid air dryingHigh glossGood water and chemical resistance

Domacryl 5369 75 BAc is a hydroxy acrylic resin with a very long pot-life and a super-fast hardness development. This resin is designed for TOP PERFORMANCE 2K PUR air or forced drying system in automotive, ACE and general metal top coats.Features & BenefitsGood adhesion on different substratesHardnessHigh glossElasticity

Domacryl 5277 75 BAc is a reactive hydroxy acrylic resin designed for industrial fast drying high solid primers and DTM one-layer paints with low VOC.Features & BenefitsGood mechanical propertiesGood outdoor durabilityGoodr anticorrosion performance

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

TRI-REZ® Polyol 1030-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Polypol 773 has high solids, excellent hardness, gloss & flexibility and also excellent weather & chemical resistance.

TRI-REZ® 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties.

TRI-REZ® Polyol 1030-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1030- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

Polypol 613 has high Solids, excellent hardness, gloss & flexibility and also excellent weather & chemical resistance.

TRI-REZ® Polyol 1230-90 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1230- 90 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.

70% in butyl acetate/butyl glycol acetate (25:5)

At 100% active with a well-balanced surface-active capability, Teraflow® 1000 provides smoother films, allowing the application of thinner coatings, and contributes to substrate wetting, improvement of gloss, and recoat adhesion. Its novel pigment-affinic functionality, allows the formulator to optimize the dispersion of almost all pigments and extenders. It is soluble in ketones such as MEK and MIBK.

Hydroxylgroup containing, high-solid, polyester containing, Acrylic-resin

TRI-REZ® Polyol 1230-60 is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® Polyol 1230- 60 makes it an ideal polyol for formulating high solids and waterborne polyurethane resins.