Products in Concrete Coatings & Stains

AQACell® HIDE 6399 X is an aqueous dispersion of a polymer based on styrene, intended for industrial use only as a raw material. Its applications span various areas, including paints and coatings for building and construction architectural coatings, concrete coatings and stains, decorative paints, wood coatings and finishes, as well as fence, decks, rails, and siding and trim. The physical form of this product is a liquid.

SILRES® BS 17040 is a high-quality, water-thinnable silane emulsion that is solvent-free. It is specifically formulated to act as a water repellent for impregnating and priming alkaline mineral surfaces. Additionally, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.

SILRES® BS 1802 is an admixture for the integral waterproofing of fresh concrete in its undiluted form. Additionally, it can be utilized as a water-resisting admixture for non-load-bearing manufactured concrete products. SILRES® BS 1802 effectively prolongs the service life of concrete structures by inhibiting the alkali-silica reaction (ASR).

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

SILRES® BS 1001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. SILRES® BS 1001 can be combined with polymer-based primers for substrate consolidation.

SILRES® BS 1360 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It can be added in undiluted form to aqueous masonry protection agents either during or after their production. Similar to SILRES® BS 1346, SILRES® BS 1360 is used undiluted as a hydrophobizing additive for aqueous masonry paints. Its primary functions are to enhance water repellency, water resistance, water vapor permeability, processability, and anti-blocking properties.

SILRES® BS 30 is a solventless silicone concentrate based on a mixture of silane and siloxane. In its undiluted form, it provides water and stain repellency to mineral substrates while enhancing their appearance. SILRES® BS 30 is suitable for a wide variety of mineral substrates used in the tile industry, including tumbled marble, limestone, slate, and saltillo clay tile.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

SILRES® BS 1803 is a solvent-free emulsion based on organo-modified silanes and siloxanes. It is specifically designed to act as a water-repellent admixture for semi-dry concrete and other non-load-bearing cement-based building materials, including paving stones and concrete blocks. SILRES® BS 1803 helps to minimize the amount of water absorbed by the concrete or other cement-based materials, thereby enhancing their durability and resistance to moisture-related issues.

SILRES® BS 710 is a permanent anti-graffiti coating designed to protect concrete, masonry, wood, and pre-existing coatings. It is based on polyorganosiloxanes and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. SILRES® BS 710 is a single-component product that cures at room temperature with ambient moisture. The cured coating offers excellent release properties and ease of removal for most permanent markers and aerosol paints.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.

StanChem Polymers SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening.

StanChem Polymers SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention.

Bermocoll EBM 8000 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll EHM 300 is associative non-ionic, watersoluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 5500 is a high viscosity grade of methyl ethyl hydroxyethyl cellulose.

SILRES® BS 1346 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It is used in its undiluted form as a hydrophobizing additive for aqueous masonry paints or plasters. Its purpose is to increase water repellency, water resistance, and water vapor permeability while also enhancing processability and antiblocking properties.

SILRES® BS 1803 A is a stable and VOC-compliant silicone emulsion with a 60% active content. It is specifically designed to reduce water uptake and create visual beading on concrete substrates while allowing the pores and capillaries to remain unblocked. This product is particularly effective when it comes to preventing water uptake and promoting beads, even at very low addition levels. One of the main applications of SILRES® BS 1803 A is as an admixture for non-load bearing cement-based formulated products, including precast products, blocks, and pavers. By incorporating this emulsion into the formulation, the resulting products gain enhanced waterproofing properties and resistance to water penetration. Furthermore, SILRES® BS 1803 A can also be used as a topical sealer for post-treatment of cement-based formulated products.

SILRES® BS 6920 is a silane-terminated binder that utilizes α-silane technology. It is specifically designed for the impregnation of mineral substrates or as a thin layer of coating on mineral surfaces. The formulations based on SILRES® BS 6920 are commonly used for stain-resistant impregnation and coating of various mineral substrates. These substrates can include polished or non-polished concrete floors, paving stones, clinker, bricks, and natural stone. By applying SILRES® BS 6920, the mineral surfaces become more resistant to stains and discoloration, helping to maintain their appearance and durability over time. The binder provides a protective barrier that enhances the performance and longevity of the treated mineral substrates.

SILRES® IC 701 is an anti-graffiti coating intended for use in the professional market for the protection of concrete, masonry, and metal substrates. The cured coating provides excellent release and ease of removal for permanent markers and aerosol paints. SILRES® IC 701 is based on polysiloxane polymers and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. It cures via the condensation reaction at room temperature by reacting with ambient moisture.

SILRES® BS 6921 is a silane-terminated binder based on α-silane technology for the impregnation of mineral substrates or as a thin-layer coating for mineral substrates. It can be used in combination with SILRES® BS 6920 when a softer formulation is required.

SILRES® BS 17040 A is a water-thinnable, solventless silane emulsion that serves as a high-quality water repellent for impregnating and priming alkaline mineral surfaces. Similar to SILRES® BS 17040, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.

SILRES® BS 16 is an aqueous solution of potassium methyl siliconate used in diluted form for the hydrophobic impregnation of mineral construction materials, making them water-repellent. The water-repellent properties of SILRES® BS 16 are developed through its reaction with atmospheric carbon dioxide (CO2), forming polymethylsilicic acid. However, it should be noted that, like all siliconates, SILRES® BS 16 may cause a white deposit on the surface of colored construction materials if used outside the recommended application guidelines.

ETONIS® 3500 W (GER) is suitable for modifying concrete, specialty mortar, and cementitious coatings for infrastructure products, especially for shotcrete applications in underground construction, tunneling, and mining. It is a polymer powder with a low glass transition temperature (Tg) and remains flexible at temperatures below freezing. It is also suitable for end products with low emissions.

SILRES® BS 1340 is a nonionic, solvent-free, waterborne emulsion of a reactive polysiloxane. It is specifically used in the formulation of water-resistant coatings. SILRES® BS 1340 can be directly incorporated, without dilution, into waterborne masonry paints and plasters either during or after their production.

SILRES® BS Creme C is an aqueous, solventless, creamy, silane-based water repellent. It is a high-quality specialty product designed for the hydrophobic impregnation of both normal and reinforced concrete. It is commonly used in applications related to concrete protection, construction materials, hydrophobic impregnation, and infrastructure.

Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.

Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.

Crystic® Isophthalic Spray Gelcoat GT-1000 is a gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.

Crystic® Brush Topcoat 506PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by roller or brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Spray Gelcoat 976SMK is a chemical resistant, thixotropic and pre-accelerated Iso - NPG gelcoat, designed for the manufacture of swimming pools. It will provide high chemical and hydrolysis resistance. This gelcoat is to be applied by spray with airless machine.

Crystic® Brush Topcoat 507PA is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Spray Gelcoat LS 30PA is a superior weathering Iso-NPG gelcoat. It is pre-accelerated and formulated for spray application. Crystic® Gelcoat LS 30PA has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.