Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Area
- Industrial Additives End Use
- Applications
Concrete Admixtures
- Application Details
- Stir product before use. The recommended admixture range is 0.1 % to 1.0 % of the cement content.
- A significant reduction in water uptake can be achieved at a concentration of 0.2 %. For post-treatment a 1:4 solution can be recommended to reduce water uptake significantly.
- When used as an admixture in semi-dry concrete SILRES® BS 1803 produces a matrix that resists water absorption without blocking pores or capillaries.
- The treated concrete inherently resists intrusion of damaging water and chemicals increasing the service life of the building material. SILRES® BS 1803 prevents or at least reduces efflorescence. A strong water beading effect occurs throughout the whole concrete block.
Properties
- Color
- Typical Properties
- Properties
SILRES® BS 1803 can be used as water repelling admixture for semi-dry concrete and other non-load-bearing cement based building materials (e.g. paving stones, concrete blocks)
- Greatly reduces water absorption
- Very good water beading
- Protection against de-icing salts
- Efflorescence reduction
- Water vapor permeable
Value | Units | Test Method / Conditions | |
Active Content | 60 | wt % | — |
Density (at 23°C) | 0.94 | g/cm³ | DIN EN ISO 2811-1 |
Dynamic Viscosity (at 25°C, Shear rate 1 s⁻¹) | approx. 2250 | mPa·s | Specific method |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.