Concrete Coatings & Stains

Maflon

HEXAFOR™ 6232

HEXAFOR™ 6232 is a water-based (meth) acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete and Bricks.

Incorez Ltd

Amirez 148/024

When your application calls for a general purpose hardener at low temperatures, Amirez 148/024 exceeds all performance expectations, meeting every specification requirement with speed and a greater degree of technical excellence. This low viscosity, fast cure waterborne reactive polyamide adduct has all application angles covered, from floor and wall painting to hygiene coatings.

Argon Kimya

ARAKRIL STA 357

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

Incorez Ltd

Amirez 148/055

Amirez 148/055, the perfect cure for formulation challenges. Even better when you discover it's been developed to address high gloss with fast cure, no blushing and water resistance. It creates floor coatings with unrivaled performance characteristics, such as excellent hardness, superb water and chemical resistance. It seals and protects to give high gloss and esthetically pleasing, durable floors.

Georgia-Pacific Chemicals

GP CL-7002

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Incorez Ltd

Amirez 148/010

Amirez 148/010, the perfect cure for formulation challenges. Even better when you discover it's been developed to address high gloss with fast cure, no blushing and water resistance. It creates floor coatings with unrivaled performance characteristics, such as excellent hardness, superb water and chemical resistance. It seals and protects to give high gloss and esthetically pleasing, durable floors.

Incorez Ltd

Aldirez A

Bubbling. It’s a problem which pops up time and time again, particularly in areas subject to low temperature and high humidity levels. Fortunately, under these conditions, Aldirez A provides the ability to create primers that remain remarkably resilient and bubble-free. In addition to its exceptional ability to inhibit CO2 generation, formulators are able to accelerate the cure of PU primers, to improve turnaround efficiency, whilst retaining a workable pot life.

C. L. Hauthaway & Sons Inc.

Hauthane HD-2504

Hauthane HD-2504 is a very hard, polycarbonate-based, aliphatic, waterborne polyurethane dispersion. Features: Superior chemical and stain resistance. Excellent exterior weathering durability. Excellent humidity resistance. Contains n-methyl pyrrolidone co-solvent.

Atmos Technologies

Vycel U

Vycel U is a low viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester and Phenolic resin systems.

Ultrakim Kimya San. ve Tic. A.Az.

NEVOSIL® R 630

NEVOSIL® R 630 is employed as a main binder in silicone based masonry paints. If formulated properly, the products made with NEVOSIL® R 630 are characterized by superior qualities such as high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral like appearance and longer life.

Jubail Chemical Industries

Araldite® GT 7071

Araldite® GT 7071 N is a low melting solid unmodified epoxy resin based on Bisphenol A. with narrow molecular weight distribution. Araldite® GT 7071 N can be added to alkyd/amino stoving enamels to enhance their quality and to powder coatings e.g. to improve their flow.

ADDAPT Chemicals BV

BioWet™ 150R

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

MPD Industries

MPD Industries UVP 0612 99

MPD Industries UVP 0612 99 is a difunctional epoxidesed soyabean oil acrylate oligomer that offers very good pigment wetting characteristics and produces flexible well adhering free radically cured films. It has low skin irritancy and suitable for flow and leveling of UV/EB curable ink and coating.

Scott Bader

Crystic® Gelcoat LS 97PA Isopthalic Spray

Crystic® Gelcoat LS 97PA Isopthalic Spray is our best weathering isophthalic spray gelcoat. It exhibits low color change and superior gloss retention when compared to all other isophthalic competitive gel coats tested. This product can be used across all markets, and it has excellent water resistance and Lloyd's approval for the marine market.

Georgia-Pacific Chemicals

GP CL-7003

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Georgia-Pacific Chemicals

GP CL-7004

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Chartwell

Chartwell B-515.71W

An amino functional metal organic adhesion promoter synthesized with a stabilized neutralized metal complex. The product is supplied as an aqueous solution.

Maflon

HEXAFOR™ 6211

HEXAFOR™ 6211 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete and Bricks.

Jubail Chemical Industries

Razeen® SL 4072X75

Razeen® SL 4072X75 is a typical type 2 epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. The resin is similar to solid resin Razeen® SR 5072 in performance.

Scott Bader

Crystic® Isophthalic Brush Gelcoat GT-600

Crystic® Isophthalic Brush Gelcoat GT-600 is our gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

CH Polymers

CH Polymers CHP 510

CH Polymers CHP 510 is a universal Dispersion which contains Styrene Acrylic polymer containing 49 % Solids and is MIT Free.

Ultrakim Kimya San. ve Tic. A.Az.

NEVOSIL® R 540

NEVOSIL® R 540 is employed as a main binder in silicone based masonry paints. If formulated properly, the products made with NEVOSIL® R 540 are characterized by superior qualities such as high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral like appearance and longer life.

ADDAPT Chemicals BV

ADDAPTOL™ DB

ADDAPTOL™ DB is a non-VOC oxygenated solvent for use as a coalescing agent in waterborne systems and tail solvent in Solvent borne systems. It is a proprietary mixture of branched esters of dibasic acids.

Jubail Chemical Industries

Razeen® SR 5357

Razeen® SR 5357 is a Solid epoxy resin based on bisphenol A and phenol novolac for powder coating.

CH Polymers

CH Polymers CHP 506

CH Polymers CHP 506 is a universal Dispersion which contains VAc Acrylic polymer containing 48 % solids and is MIT Free.

Maflon

HEXAFOR™ 6282

HEXAFOR™ 6282 is a solvent-based methacrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, and Bricks.

Bernd Schwegmann

KORRODUR™

Corrosion protection additive for solvent borne coating systems. KORRODUR is primarily a rust converting additive for solvent borne alkyd resin paints. KORRODUR also has a good anticorrosive effect in solvent-based coating systems based on epoxy, chlorinated rubber or acrylic binders. Typical applications are: Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes. For aluminum-pigmented systems we recommend KORRODUR AL 2.

Maflon

HEXAFOR™ 6242

HEXAFOR™ 6242 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete, Bricks and (especially) marble. It can be used also for paper trea™ent.

C. L. Hauthaway & Sons Inc.

Hauthane HD-2117

Hauthane HD-2117 is an extremely hard, aliphatic, polyester-based, aqueous polyurethane dispersion with exceptional chemical and early water-resistance properties. Features: Outstanding water and chemical resistance. Fast early water resistance development. Can be crosslinked to enhance performance. Dilution and clean-up with ordinary tap water. Contains n-methyl pyrrolidone (NMP) co-solvent.

Scott Bader

Crystic® Laminating Resin 471PALV

Crystic® Laminating Resin 471PALV is a pre-accelerated, low-viscosity polyester resin with rapid hardening characteristics. This laminating resin combines rapid impregnation of reinforcements and fillers with a very short mold release time and is suitable for hand-laying or spray applications. It has an 8-minute gel time, Lloyds approval, and is suitable for use in marine, transportation, building and construction, and industrial applications.

Scott Bader

Crystic® Isophthalic Brush Topcoat 65PAX

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

Scott Bader

Crystic® Low Styrene Spray Gelcoat LS 96PA

Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.

Scott Bader

Crestacryl® 71-9078

Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete.

Scott Bader

Crystic® Fireguard Gelcoat 70PA

Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.

Scott Bader

Crystic® Low Styrene Gelcoat 76PA FR

Crystic® Low Styrene Gelcoat 76PA FR is a low styrene content, pre-accelerated, fire retardant gelcoat developed to have very low surface spread of flame. It has been formulated for brush application and can be used for building applications, vehicle bodies and general industrial work.

Mallard Creek Polymers

Rovene® 6121

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.