Products in Other Paints & Coatings Applications

Domopol 5200 75 BAc is a special purpose resin developed to improve adhesion of paints to various substrates. This resin is also suitable for high solids coatings formulations.Features & BenefitsImprove adhesion of paintsAdhesion improvement on aluminum, steel and galvanized steeSuitable for high solids coatings

Domacryl 949 is a low viscosity general purpose methacrylate resin for two-component cold spray plastic road markings. This resin is accelerator-free and can be used by itself or in combination with Domacryl 945.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 945)For warm climate

Domacryl 941 is a methacrylate resin for hard two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plastics (1:1 system with Domacryl 943)Hard resin

Domalkyd 4161 70 BAc is an alkyd resin modified with saturated fatty acids developed for 2K lacquers and enamels for wood and metal.Features & BenefitsHigh glossHardnessElasticity

Domalkyd 5435 60 SA/X is an alkyd resin modified with synthetic fatty acids developed for industrial finishes in combination with DCO alkyd and melamine resins. This resin is also suitable for universal pigment pastes for NC and stoving automotive finishes.Features & BenefitsHigh glossy 2K PUR lacquers for woodPreparation of universal pigment pastes

Domacryl 940 is a methacrylate resin for flexible two-component cold spray plastic road markings. This resin is pre-accelerated for curing with dibenzoyl peroxide.Features & BenefitsLow VOCCold spray plastics (1:1 system with domacryl 942)Flexible resin

Domalkyd 5421 75 BAc is an alkyd resin modified with coconut fatty acids developed for high quality NC and AC lacquers for wood, 2K PUR lacquers for furniture.Features & BenefitsHigh quality furniture lacquersProvides higher solid content in coatings

Domopol 5102 50 SAB/SN ND is a saturated polyester resin recommended for many coil coating applications, including interior architecture, appliance finishing, and aluminum primers. This resin is suitable for primers for hot dip galvanized steel. The bio-based content is 14% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits14% biobased on solid contentAppliance finishingAluminum primers

Domacryl 833 50 D-30 is a physically drying thermoplastic acrylic resin used in a different paint system for exterior protective coatings.Features & BenefitsPhysically drying

Domopol 5100 60 X is a saturated polyester resin designed for can, coil and industrial coatings. This special purpose resin can improve the adhesion of paints to various substrates.Features and Benefits :adhesion improvement on aluminum, steel and galvanized steel improves the intercoat adhesion, corrosion protection, flexibility and gloss

Domopol 0194 45 Wa is a water-thinnable saturated polyester resin suitable for the formulation of base coats and top coats. The bio-based content is 14% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits14% biobased on solid contentSolvent freeMetal decoration enamels

Domopol 5155 55 SA/MPA is a saturated polyester resin designed for BPA-NI food contact interior and exterior can coatings. The bio-based content is 6% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits6% biobased on solid contentBisphenol A non-intent coatingsFully complies with FDA regulationsExcellent sterilization and chemical resistance

Domalkyd 2645 100% LV is a long oil alkyd resin based on linseed oil recommended for preparation of universal pigment pastes used in combination with long-oil alkyd resins.Features & BenefitsExcellent pigment wetting capacityVery good compatibilityGrinding resin

IrisBlend W BLUE OXIDE (XLR) is a series of water-based colorants, specific for architectural paints for interiors and exteriors, designed to be used with tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend W colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisBlend W RED (RV) is a series of water-based colorants, specific for architectural paints for interiors and exteriors, designed to be used with tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend W colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisBlend U BISMUTH YELLOW (XUL) is a series of universal colorants, specific for architectural paints for interiors and exteriors, designed to be used into tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend U colorants are manufactured based on stringent specifications for perfect reproducibility of color strength, tone and rheology.

The DayGlo SPL-N Dispersions contain approximately 46% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-N Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems.

ILCO PHOS 202 is used as a hardener for acid-curing paint systems as well as a pickling and anchoring agent for the application of paints. In printing inks ILCO PHOS 202 acts as flexibliser. It can be used as adhesion promoter by interacting with polar groups of the substrate to the surface.

A and AX series pigments are thermoplastic, fluorescent pigments recommended for a wide range of applications where resistance to strong solvents is not needed, including paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, and vinyl plastisols and organisols.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

IrisBlend U GREEN OXIDE (XUG) is a series of universal colorants, specific for architectural paints for interiors and exteriors, designed to be used into tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend U colorants are manufactured based on stringent specifications for perfect reproducibility of color strength, tone and rheology.

IrisBlend U RED (UR) is a series of universal colorants, specific for architectural paints for interiors and exteriors, designed to be used into tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend U colorants are manufactured based on stringent specifications for perfect reproducibility of color strength, tone and rheology.

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

Aromatic Polyurethane Topcoat DMF-Free & TOL-Free

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

IrisColor BLUE (BC) ia a series of universal pigment dispersions specific for architectural paints and enamels for interiors and exteriors, formulated to be used for in-plant tinting. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisColor colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

Aliphatic Polyurethane for Patent

IrisECO YELLOW (G) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Aminoethylaminopropyltrimethoxysilane (technical grade). Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

PEL-CAT™ 9666 Most delayed action trimerization catalyst, suitable for CASE Applications. When used as a co-catalyst, improves wet out and flow without significantly extending overall cure time.

OG840 is a curing agent which find its applications in screenprinting where a good thermal resistance is required.

T and GT-series pigments are thermoset, fluorescent pigments recommended for a wide range of applications where solvent resistance is required.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

OMNISTAB® AN 1010 is a pentaerythritol tetrakis[3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionate. It is a sterically hindered phenolic primary antioxidant.