Products in Baby Diapers

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Fulflex® Elastic Rubber Threads are made from unique latex-free rubber compounds that are skin-friendly and deliver quality, comfort, and the best line reliability to the diaper, training pants, adult incontinence, and the feminine hygiene industries. Our rubber threads maintain stretch without sagging while delivering excellent comfort and fit regardless of size. Being gentle on the skin with low elastic pressure, the threads help reduce red marking for babies or aging skin.Features / Benefits Minimal force variation over a wide range of elongation and contraction High elongation, up to 400% installed Low permanent set, hysteresis loss, and stress relaxation Superior stress-strain curve absorbs process variation on converters without impacting performance Comfortable leak-free fit with greater extension Large choice of cross-sections, from rectangular to thin, flat tape Multiple ends Free of natural rubber latex protein allergens Excellent stretch and recover attributes Lower elastic stress reduces red marking for babies and tender, aging skin Flexible design and esthetics for customized product features Simplified process, reduced number of strands Improved line performance DMAC and solvent-free

Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.

NOVIS P-490 is an Isotactic low molecular weight polypropylene with enhanced flow properties. Melting point and most of its mechanical properties are similar to conventional PP. It is its low molecular weight and narrow molecular weight distribution which impart NOVIS P-490 high melt flow rate.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

American Polyfilm Breathable TPU Film is a specialty TPU product as an unsupported film on rolls. From this form, the TPU sheet film can have adhesive and liner applied or can be die cut to specification. Our Breathable Film also performs well in laminations to produce breathable textiles. Because Polyurethane Film is monolithic, it creates a liquid barrier. This is a distinct advantage over other breathable products that are microporous, which means they have tiny holes in the film allowing moisture vapor through.

RG 1101 SC is a Polypropylene Homopolymer With Very Narrow MWD and Resistance to Gasfading. It is used in NonWovens Spunbonded, Disposable Napkins, Diaper, GeoTextiles, Filter Application

Al Sharq Flexible Packaging Factories CPP NORMAL GRADE WHITE (NEW) is a transparent, co-extruded 3-layer film and which is one side corona treated.

Polyfill Technologies Black Masterbatch is based on LDPE. It contains Blends of Antioxidants and UV Stabilizer Aids dispersed in the Polymer Matrix to give excellent performance in environmental condition. It is One Pack System which when mixed with polymer meets the desired properties.

Advance ZincTek’s USP grade Non-Nano, 57 wt% ZinClear XP™ (uncoated zinc oxide) with Alusion® (Aluminum Oxide) in organic cocos nucifera oil, is ideal for skincare applications and tinted & transparent sunscreens. Powders and dispersions are available Ex Netherlands, Texas and Australia.Distributed by: Lehvoss – France, Germany, Iberia | Eurosyn – Italy | Wilfrid Smith – UK | Integrated Chemicals Specialties – Netherlands | Aniko Partners – Bulgaria | Elton Group – Greece Connell Brothers – India | United Descaler – India | K.S. Pearl – South Korea | H.Holstein – Japan | Kosfarm – Taiwan | Kapharm – Vietnam |Y.S. Ashkenazi Agencies – Israel | Elasco Dis Ticaret – Turkey.

Moplen HP553P is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process.Moplen HP553P is a homopolymer typically used by customers in high speed production of staple fiber.Moplen HP553P resin meets the FDA requirements in the CodeofRegulations in 21 CFR 177.1520 for food contact.

Polyfill Technologies Yellow Masterbatch Loaded Stabilized Masterbatch based on LLDPE. It contains Blends of Antioxidants and Lubricants Aids dispersed in the Polymer Matrix to give excellent performance in environmental condition. It is One Pack System which when mixed with polymer meets the desired properties.

Osterman & Company Inc. Osterlene® PPH35F is used in food packaging film, heavy duty packaging, absorbtion & filtration, filament yarn, furniture & buildings, IBCs, geotextile & agriculture, hygiene nonwoven, protective clothes, wipes/tissues.Osterlene PPH35F is a very high melt flow polypropylene homopolymer resin designed for fiber spinning.Osterlene PPH35F meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Polyfill Technologies Elastofill Compound PT-EF05 is plastomeric material based on the specialty polymer blends with the unique characteristics. The product is highly compatible with LD, LLDPE and PP. It enhances the softness, elongation at break, elasticity and impact resistance of the film. Besides it also improves the transparency in the films. It also enhances the thermal bonding strength.

TABOREN® EC 49 C 70 is a LLDPE, Filler: Calcium carbonate, Stabilization: High antioxidant.

PETOPLEN EH251 is a homopolymer polypropylene resin with narrow molecular weight distribution. The material is produced by controlled rheology (CR) technology. It is suitable for high speed injection molding and general purpose fiber extrusion applications.

RG 1101 R is a Polypropylene Homopolymer With slightly Narrow MWD and Resistance to Gasfading. It is used in BCF/CF, POY Yarns, NonWovens, Injection Molding of Articles

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Random copolymer polypropylene; lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber. Recommended for: Non woven soft touch fabrics Spunbond process; melt spinning of low denier fibers where it is necessary this properties; extrusion coating of raffia woven fabrics; injection molding general purpose applications.

KURARAY POVAL™ 20-98 by Kuraray is an odorless, fully saponified polyvinyl alcohol. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl varying degree of polymerization and hydrolysis. It provides high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 20-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Characteristics: Control reologhy high melt flow rate narrow molecular weight distribution Homopolymer polypropylene, lot to lot consistency, with special additives package and high cleanness, to get stable spinning processability in low denier fiber at high speed, good gas fading resistant. Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, melt spinning of low denier fibers, extrusion coating of raffia woven fabrics, general purpose injection molding applications.

POLYPROPYLENE PP 1362R (Z21S) is obtained by polymerization of propylene in presence of complex metalorganic catalysts.It incorporates long-term thermal stability, thermal oxidative degradation resistance at PP production, processing and use of PP-made articles,resistance to fading from environmental exposure,improved melt rheology

Al Sharq Flexible Packaging Factories CPP METALLIZABLE GRADE 20 is a transparent, co-extruded 3-layer film and which is one side corona treated.

General Industrial Polymers SEBS-GP50 is actually a form of thermoplastic elastomer (TPE) with styrene added. Green Peace lists SEBS as an acceptable alternative to PVC in toys. Polyolefin plastics such as Polyethylene (PE) and Polypropylene (PP) are the most common building blocks for SEBS, which don't need plasticizers (like phthalates) or stabilizers (like lead) for flexibility. SEBS is used in a wide variety of general-purpose rubber items as well as in handlebar grips, toothbrushes, sports mouth guards, diapers (as the elastic component) and teethers. The chemical resistance of SEBS is similar to natural rubber, having excellent resistance to water, acids, and bases.

Franplast Special grade for film blowing is a TPE compound based on SEBS specially developed for film blowing of elastic films with layers of less than 100 μm (up to 50 μm). The opal/translucent compound can be enriched with gliding/release anti-blocking agents. Process setting and color methods are equivalent to PE film blowing. Our Chemiton for film is suitable for the production of elastic single-layer film for surgical drapes. We can also offer grades for improving the features of adhesive film in PE, especially for applications connected with baby and personal care (diaper and adult diapers).

RG 1191 N is a Polypropylene Homopolymer With High Efficient antiGasfading Stabilization. It is used in Staple Fibers (Fine Denier), Hygienic NonWoven Fabrics (NWF)

Advance ZincTek’s USP grade Non-Nano, 65 wt% dispersion of uncoated zinc oxide in coco-caprylate/caprate, is ideal for skincare applications and transparent and tinted sunscreens. Powders and dispersions are available Ex Netherlands, Texas and Australia.Distributed by: Lehvoss – France, Germany, Iberia | Eurosyn – Italy | Wilfrid Smith – UK | Integrated Chemicals Specialties – Netherlands | Aniko Partners – Bulgaria | Elton Group – Greece Connell Brothers – India | United Descaler – India | K.S. Pearl – South Korea | H.Holstein – Japan | Kosfarm – Taiwan | Kapharm – Vietnam |Y.S. Ashkenazi Agencies – Israel | Elasco Dis Ticaret – Turkey.

Moplen HP563T is a Fast crystallization polypropylene for spunbond

Characteristics: Control reologhy high melt flow rate Homopolymer polypropylene, excellent uniformity in the spinning of low-denier fibers at high speed and easy mold filling, good balance "stiffness/impact" Recommended for: Fabrication of Non woven fabrics by high speed Spunbond process, extrusion and spinning of low denier fibers, extrusion coating of raffia woven fabrics, Injection thin wall articles and short cycle times, general purpose injection molding applications.

CET® 230 by Resirene is comprised of Styrene Acrylic Copolymer. It is commonly used

CET® 231 DB by Resirene is comprised of Styrene Butadiene Styrene and Styrene Methyl Methacrylate Copolymer. It is commonly used

Moplen HP461X is a new generation polypropylene homopolymer, supplied in pellet form. Its main application is in melt blown non-wovens, with very narrow molecular weight distrbution, typical end use products including diapers, sanitary napkins, oil absorbent mats, wipes, masks, air filtration media, and wet tissues.

NH-P01 masterbatch creates superior softness by reducing surface coefficient of friction with out the need for additional processing steps. This, combined with very low use levels, makes NH-P01 and extremely cost-effective means of adding soft feel to a wide variety of PP nonwoven products.

KURARAY POVAL™ 15-99 by Kuraray is an odorless, fully saponified polyvinyl alcohol. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It possesses good penetration capacity and good adhesion properties. It exhibits varying degree of polymerization and hydrolysis. It provides high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 15-99 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Inoac Moltopren SC is a generic term for INOAC polyester-based polyurethane foam. Flexible polyurethane foam used as a cushioning material in a wide range of applications due to its lightweightness. It is possible to adjust hardness from soft to hard products and easy to adjust density as well. In particular, 'MOLTOPREN' is used as various industrial materials.