Printing & Packaging

Munzing

AGITAN® 109

AGITAN 109 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. It's recommended for architectural coatings, building products, printing inks, adhesives and polymerization processes.

Munzing

AGITAN® 282

AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.

Munzing

METOLAT® 780

MÜNZING’s METOLAT 700 series are APEO-free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLBs specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

PolyAziridine Global

PolyAziridine Global PZE-1000

PolyAziridine Global PZE-1000 is an ethylene imine based tri-functional polyaziridine that is used as a cross-linker for both aqueous and non-aqueous coatings, inks, and adhesives to promote both physical and chemical properties. With the highest level of functionality at 3.3, it yields the highest level of cross-link density of polyfunctional aziridines. The aziridine end groups can react with active hydrogen as found on carboxyl groups of acrylic emulsions or polyurethane dispersions. PZE-1000 also has a hydroxyl group, which allows it to dispersion readily into aqueous systems. PZE-1000 is added at levels of 1% to 3% to finished formulated coatings, inks, or adhesives. It is added slowly and under good agitation. After mixing, an aqueous system with a pH of 9.0-9.5 will typically have a pot life of 18-36 hours. This time will be reduced when the pH is lower.

Munzing

AGITAN® 350

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

Munzing

AGITAN® 218

AGITAN 218 is a defoamer for all common emulsion systems.

Munzing

EDAPLAN® LA 403

EDAPLAN LA 403 is suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems.

Munzing

EDAPLAN® LA 452

EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

ichemco

ichemco Color Paste WA White 4

COLOR PASTE WA WHITE 4 is an APEO free water dispersion of titanium dioxide. Total pigment concentration: 56 %.

Munzing

AGITAN® 701

AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.

ichemco

ichemco Color Paste WI White 4

COLOR PASTE WI WHITE 4 is a waterborne dispersion of rutile titanium dioxide.

Munzing

TAFIGEL® PUR 54

TAFIGEL PUR 54 is a low viscous, solvent-free associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 54 can be used alone or in combination with other TAFIGEL thickeners, as well as with further technology thickeners.TAFIGEL PUR 54 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives, putties and printing inks. TAFIGEL PUR 54 is suitable for indirect food contact applications.

Munzing

AGITAN® 731

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

Valpac

Valpac V-TAC 5951

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

Munzing

AGITAN® 295

AGITAN 295 is a surface active product formulated for middle viscous, finely dispersed pigmented coatings. Existing foam will be destroyed. Re-creation of foam will be avoided. Furthermore AGITAN 295 is also recommended for treatment of different types of polyvinylalcohol - solutions.

CLiQ SwissTech

CLiQSMART® 1031

CLiQSMART 1031 is a100% polyglycol based defoamer for aqueous systems. The silicone and mineral oil free defoamer shows very high efficiency and is typically applied in low-to-mid gloss pigmented aqueous coatings, adhesives and ink systems.

Munzing

AGITAN® 305

AGITAN 305 is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders.

Munzing

TAFIGEL® AP 15

TAFIGEL AP 15 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character.

Munzing

DEE FO® 1015

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

Munzing

METOLAT® 700

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Scott Bader

Texicryl® 17-0330

Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.

PolyAziridine Global

PolyAziridine Global PZP-1000

PolyAziridine Global PZP-1000 is a propylene imine tri-functional polyaziridine that is used as a cross linker for both aqueous and non-aqueous coatings, inks, and adhesives to promote both physical and chemical properties. The aziridine end groups can react with active hydrogen as found on carboxyl groups of acrylic emulsions or polyurethane dispersions. PZP-1000 is added at levels of 1% to 3% to finished formulated coatings, inks, or adhesives. It is added slowly and under good agitation. After mixing, an aqueous system with a pH of 9.0-9.5 will typically have a pot life of 18-36 hours. This time will be reduced when the pH is lower.

Kraton

SYLVATAC™ RE 25

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Munzing

METOLAT® 1299

METOLAT 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems. It provides the following properties: Effective in hard or soft water up to 100°C; Effective over a wide pH range

Munzing

TAFIGEL® PUR 82

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

Munzing

METOLAT® 362

METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.

Michelman

Michem® Prime 4990R

Michem® Prime 4990R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Michelman

Michem® Prime 4983R

Michem® Prime 4983R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Arakawa Chemical

Tamanol E-102A

TAMANOL E-102A is a terpene phenolic resin emulsion consisting of microscopic particles, especially prepared for use in water based adhesives, such as acrylic emulsions, natural rubber and synthetic rubber latex based adhesives.

Valpac

Valpac V-TAC 9001

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

Munzing

AGITAN® 299

AGITAN 299 is a highly effective particle-free defoamer for aqueous systems.

Munzing

METOLAT® 288

METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.

Munzing

METOLAT® 775

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Munzing

DEE FO® 215

A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.

Munzing

AGITAN® 352

AGITAN 352 is a special composition with excellent stability and high efficiency. AGITAN 352 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

ichemco

Release ST9 HM Dry

PRINTABLE RELEASE COAT FOR DOUBLE CORONA TREATED POLYOLEPHYNIC HOT-MELT ADHESIVE TAPES RELEASE ST9 HM DRY is a powder compound, based on synthetic resins, easily soluble in solvents (TOLUENE/IPA: 75/25 or HEXANE/IPA : 75/25).