Products in Printing & Packaging: Release Agent

Poligen® WE 6 offers multifunctional use as an Abrasion Resistant, Release, Mold Release, and Polishing Agent. It boasts properties like Corrosion Resistance and improved Physical and Mechanical Properties. Available in powder, solid, and wax forms, it supports various industrial applications, including cleaning and materials enhancement.

Poligen® WE 1 is a versatile liquid product serving as an Abrasion Resistant, Release and Mold Agent. It finds applications in Paper Manufacturing and Textiles, offering properties such as Anti-Abrasion and Polishing.

SILFAR® E 1049 is a silicone fluid emulsion specifically formulated for a wide range of applications, including those in the food and pharmaceutical industries. It is composed of components that meet the necessary standards outlined in the relevant EP and USP monographs. SILFAR® E 1049 can be utilized as an excipient in pharmaceutical products, although it cannot be used as an active pharmaceutical ingredient.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

CONSTAB SL 05035 PP contains 6% erucamide in homopolymer and serves as a mold release agent, release agent, and slip agent. It's ideal for blow molding and injection molding of polypropylene (PP), offering attributes like good printability and excellent flow properties.

CONSTAB SAB 06573 LD is an antistick and antifusion product suitable for extruded, blown, and cast films. It prevents films from sticking to hot surfaces. It functions as an anti-tack agent, a mold release agent, and a release agent. The carrier used is polyethylene (PE). It features good mold release properties.

CONSTAB SL 05004 LD is a multi-functional product with functions like slip agent, melt flow agent, mold release agent, and release agent. It is used in blow molding and injection molding processes, with polyethylene (PE) as its carrier. This product contains 5% erucamide and serves as a mold releaser and flow improver.

Andisil® EM 350 Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Andisil® EM 350C Emulsions are non-flammable, non-toxic, nonionic emulsions of various viscosities of polydimethylsiloxane fluids.

Mavcoat® SR is a specialized semi-permanent release agent for the release of silicone, fluorosilicone, and organic rubber elastomers. Its unique chemistry cleans mold and maintains a lustrous surface.

The MBD 40245 is a masterbatch containing 5% of Erucamid, based on a LDPE resin. For SDS, please contact Addiplast Group using the 'Request Document' button.

Mavcoat® MD-4 is a water-based, semi-permanent release coating for all organic rubber elastomers. It contains a novel binder system that adheres strongly to the mold surface and a unique lubricity additive that allows for good rubber flow throughout the mold. Mavcoat® MD-4 is a non-silicone ceramic-based technology and can be used to make food grade products because it meets 21 CFR 181.28.

Mavcoat® RH is a specialized product used to make rubber hose from rubber mandrels. It seals and releases the rubber mandrel upon which, rubber hose is extruded, wrapped, and cured in very long lengths of 1,000 to 2,000 feet. Mavcoat® RH cures on the mandrel and provides extreme lubricity so the entire length of hose is extracted in one piece. The diameter of the rubber mandrel can be any size, but typically ranges from 1/8” to 4”. The finished hose is used in many applications such as, hydraulic, industrial, and oil field.

Mosselman Zinc Stearate (91051-01-3, 557-05-1) is a water-insoluble soap of commercial stearic acid.

K - STOFF O is primary amides specially developed as mold release & slip additives for rubber application. In rubber application, these amide waxes also act as a processing aid and/or additive to improve the surface properties of both natural and synthetic rubbers such as NR, NBR, SBR, EPDM, CR, etc.

Mavcoat® TZ-4 technology is a water-based coating that releases all organic rubber. It is semi-permanent and may only need to be applied once per shift in some applications. Since Mavcoat® TZ-4 releases all organic rubber compounds, it will be the only release needed on the production floor.

Mavcoat® MD-W6 utilizes a water-based ceramic technology that releases all organic and silicone rubber. It is a thin film non-silicone, semi-permanent system which will minimize build up. Mavcoat® MD-W6 will consolidate all mold releases into one system.

K - STOFF E is a refined vegetable origin bio-based dispersing agent to improve lubrication.

Mavcoat® STM is used to prevent uncured rubber from sticking to itself when rubber is stacked or coiled. Mavcoat® STM replaces messy talc and stearate-based dispersion. It is non-silicone, water-based, and clear. It does not contaminate the rubber or cause defects during molding operations.

Mavcoat® MBH is a specialized technology for making Mandrel-Built Hose on straight mandrels. It can be used as-is or diluted with water. Mavcoat® MBH will release all organic rubber elastomers. The technology seals, releases and lubricates the mandrel, which is then tightly wrapped with rubber and cured. The coating produces a very low coefficient of friction, so extraction is easy, and the finished hose slides from the mandrel with little effort.

Mavcoat® SRLP-2 is a specialized technology for making mandrel-built silicone rubber parts. It is commonly used for making aircraft door seals and other silicone rubber laid up on internal mandrels. The coating releases compression parts and lubricates the mandrel for easy extraction. Tightly wrapped long sections of cured silicone rubber slide from the mandrel with little effort.

Mavcoat® 1000 coats and impregnates the nylon tape that is used to wrap mandrel-built rubber hoses. It prevents the tape from sticking to the rubber hose, making the re-usable nylon tape easy to remove. Tape life is prolonged, saving the operation money. Mavcoat® 1000 is a concentrated polymer solution that is diluted with water. It is also non-silicone so there is no contamination of the finished hose.

Libnol G-7411 is a High Molecular Weight Complex Ester.

Tepe Kimya Zinc Stearate is a powerful mold release agent, external lubricant and dispersing agent for plastic and rubber applications. Its high clarity makes it suitable for polystyrene resins. Zinc stearate also finds uses in the coatings and construction chemicals industries.

CM-P03 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Qingdao Zhongsu PE Wax H-20 is a polymerized type.

CM-E02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Slide Products Pure Eze Mold Release Agent (No. 45712N) is a white oil-based, food-approved release ideal for medical and food applications. Use Pure Eze with all thermoplastic resins, polyolefins, polycarbonates, rubber and some epoxies. It is colorless, odorless, tasteless and will not change color over time.