Products in Can Coatings: Blocking Resistance

Micro Powders Inc MPP-620XXF is High performance micronized polyethylene wax which provides a unique combination of surface slip, abrasion/rub resistance, and anti-blocking in a wide variety of coatings and inks.Features and Benefits Imparts excellent abrasion, rub and mar resistance with good surface slip Provides excellent antiblocking properties Adds heat resistance Better resistance to solvent absorption and swelling when compared to Fischer-Tropsch (synthetic) waxes

Micro Powders Inc MPP-635XF is Micronized high molecular weight polyethylene wax for maximum rub and abrasion resistance in inks and coatings.Features and Benefits Crystalline, high melting point wax provides superior rub and abrasion resistance Imparts excellent antiblocking properties High molecular weight and hardness improves resistance to solvent absorption and swelling Easy to disperse fine powder that can be incorporated with high speed mixing

Micro Powders Inc MPP-635F is Micronized high molecular weight polyethylene wax for maximum rub and abrasion resistance in inks and coatings.Features and Benefits Crystalline, high melting point wax provides superior rub and abrasion resistance Imparts excellent antiblocking properties High molecular weight and hardness improves resistance to solvent absorption and swelling Easy to disperse fine powder that can be incorporated with high speed mixing

Superslip™ 6515 is Economical combination of polyethylene and amide wax that provides scratch and mar resistance with a smooth surface feel.Features and Benefits Polyethylene provides scratch and mar resistance EBS provides maximum surface lubricity and block resistance without the use of PTFE Imparts a smooth surface "feel"

Micro Powders Inc MPP-611XF is High performance grade of micronized olyethylene wax for inks and coatings.Features and Benefits Imparts excellent rub and mar resistance with good surface slip Provides excellent antiblocking properties Good heat resistance Better resistance to solvent absorption and swelling when compared to Fischer-Tropsch (synthetic) waxes

PropylMatte 500 is Finely micronized polypropylene for consistent matting and gloss control in paints, inks and industrial coatings.Features and Benefits Provides uniform gloss reduction with good clarity, a smoother surface feel, and no viscosity effects when compared to silica additives Tough, high molecular weight polymer imparts superior burnish and abrasion resistance vs. silica Does not lower COF; ideal for non-skid surfaces In powder coatings, lowers gloss, reduces slip, and functions as a highly effective degassing agent vs. benzoin Eliminates powder coating pinholes and improves surface adhesion when overcoating or using silicone sealants Adds texture in low bake (Low E) powder coatings

Micro Powders Inc MPP-635G is Micronized high molecular weight polyethylene wax for maximum rub and abrasion resistance in coatings and inks.Features and Benefits Crystalline, high melting point wax provides superior rub and abrasion resistance Imparts excellent antiblocking properties High molecular weight and hardness improvesresistance to solvent absorption and swelling Easy to disperse fine powder that can be incorporated with high speed mixing

Synfluo 168VF is an economical combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

PropylMatte 31 is Finely micronized densified polypropylene for consistent matting and gloss control with superior in- can stability in water-based paints, coatings and inks.Features and Benefits Efficient gloss reduction from satin to matte finish Improves burnish resistance vs. silica mattifiers Particle density optimized to essentially eliminate flotation or settling in most water based systems Imparts non-slip properties For more efficient matting with a fine microtexture, try PropylTex 325HD/270HD

PropylMatte 31SA is Finely micronized PTFE modified polypropylene for consistent matting and gloss control with surface slip, abrasion and burnish resistance.Features and Benefits Efficient gloss reduction from satin to matte finish Polypropylene improves burnish resistance vs. inorganic flattening agents PTFE provides additional abrasion resistance, enhanced lubricity and surface slip Density optimized for maximum stability in water based and energy curable systems Adds texture in low bake (Low E) powder coatings

PropylMatte 31HD is Finely micronized densified polypropylene for consistent matting and gloss control with superior in- can stability in water-based paints, coatings and inks.Features and Benefits Efficient gloss reduction from satin to matte finish Improves burnish resistance vs. silica mattifiers Particle density optimized to essentially eliminate flotation or settling in most water based systems Imparts non-slip properties For more efficient matting with a fine microtexture, try PropylTex 325HD/270HD

Micro Powders Inc MP-22 is a high performance, versatile grade of micronized Fischer-Tropsch wax for improved slip, scratch and rub resistance in a wide variety and paints, coatings and inksFeatures and Benefits Imparts a high degree of lubricity and slip with rub and mar resistance Provides antiblocking properties Gives long-lasting water beading and weather resistance to exterior alkyd-based stains Easy to disperse fine powder that can be incorporated with high speed mixing Biodegradable to OECD 302C test standard Not a microplastic per ECHA definitions

Polysilk® 750 is a formulated wax composite that provides surface slip with scratch and rub resistance, as well as a smooth surface feel.Features and Benefits Provides abrasion, scratch and rub resistance Improves block resistance Adds lubricity and a smooth feel Maximum lubricity achieved after 12 to 24 hours Easy to disperse fine powder that can be incorporated with high speed mixing

Synfluo 178VF is a high performance combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

SuperGlide 904XF is a unique combination of amide wax and Fischer-Tropsch wax that provides slip, scratch and block resistance with a very smooth surface feel.Features and Benefits EBS provides maximum surface lubricity and block resistance without the use of PTFE Provides scratch and mar resistance Imparts a smooth surface "feel" Provides uniform gloss control at higher dosage levels

Synfluo 180VF is High performance combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

Domopol 9040 45% is a high molecular weight polyester resin developed for interior can coating and coil coating appliance finishing or HDG steel primers. Principal properties of this resin are flexibility and corrosion resistance. The bio-based content is 29% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features & Benefits29% biobased on solid contentBisphenol A non-intentImproves blocking resistanceAppliance finishingCan and coil coatings

NatureFine R331 is Finely micronized food grade rice bran wax for use in industrial coatings and agrochemical products.Features and Benefits Natural food grade wax conforming to 21CFR 172.890 Excellent burnish and abrasion resistance compared to synthetic wax additives Biodegradable to OECD 302C test standard Improves lubricity, dust-off, and block resistance in seed coatings Effective dry powder binding agent Microplastic alternative

PolyGlide® 1226XF is a highly engineered HDPE/ceramic/nanoceramic composite for abrasion resistance and lubricity.Features and Benefits HDPE composite reinforced with hard, inert ceramic microspheres and nanoceramic platelets Improved Taber abrasion resistance when compared to PE/PTFE additives Provides slip and lubricity Ideal for can and container coatings; 21CFR 175.300 approved Effective replacement for PTFE additives Compare to (coarser) Polyfluo 900

Polyfluo® 523XF is a unique extra fine, high performance composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance High density polyethylene provides improved surface slip Extra fine particle size provides excellent gloss retention and film clarity

Polysilk® 600 is a formulated wax composite that provides surface slip with scratch and rub resistance, as well as a smooth surface feel.Features and Benefits Provides a high level of scratch and rub resistance Improves tape release, block resistance, and heat resistance Adds surface slip to impart a silky smooth feel Maximum lubricity achieved after 12 to 24 hours Easy to disperse fine powder that can be incorporated with high speed mixing

Ultrafine™ 1000 A is a finely micronized polyethylene wax powder recommended when maximum rub and mar resistance, block resistance, slip, re-coatability and elevated processing temperatures are required. The average particle size of Ultrafine 1000 A is 7 microns with a narrow distribution of particle sizes for ease of dispersion and uniformity during processing. Addition levels range from 0.5 to 3%, depending upon application requirements.

Optirub™ OP A is a micronized, oxidized polyethylene that easily disperses into aqueous systems. Optirub OP A is processed to a 12 micron average particle size and formulated to give excellent rub resistance, lubricity, gloss and anti-blocking properties. Addition levels range from 0.5 to 2%, depending upon application requirements.

ProHere® L 90013 is used as an additive to provide lubricity, block and abrasion resistance and scratch resistance to metal coatings.

CERETAN® MXF 10115 is a spherical, micronized polyethylene wax, coated with PTFE. This product have applications as Paints and coatings, Printing Inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

CERETAN® MXF 10215 is a spherical, micronized polyethylene wax, coated with PTFE.This product have applications as Paints and coatings, Printing Inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Ultrafine™ 1W A is a polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1W A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Recommended usage level is 1 to 4%.

Optirub™ PC A is a finely micronized, polyethylene and carnauba blend processed to an 8 micron average particle size. Optirub PC A is recommended for applications where gloss retention, clarity, or inter-coat adhesion is important. In addition, Optirub PC A provides an excellent combination of slip, wet scuff, mar and block resistance. Optirub PC A is not recommended for recoating, imprinting, gluing, and die-stamping applications. Recommended usage level is 1 to 3%.

Michem® Emulsion 61335 - A water-based emulsion provides excellent slip and mar resistance and anti-blocking properties for can and coil applications. It is also used as a release and slip aid in adhesives and paper coatings.

ProHere® L 90900 imparts lubricity to metal coatings and presents food contact compliance.

Ark (FoGang) Chemicals Industry Co. Ltd AC-333 is applied in all coating systems to reduce surface tension of coatings, increase surface smoothness, scratch resistance and blocking resistance. Ark (FoGang) Chemicals Industry Co. Ltd has excellent compatibility, prevents the formation of Bernard whirlpool, improving the leveling property and luster. Ark (FoGang) Chemicals Industry Co. Ltd AC-333 can be used in solvent-free, solvent-type and water-based coating systems and printing inks.

ProHere® L 90100 imparts lubricity, scratch and abrasion resistance to metal coatings.

Ultrafine™ 1WLS A is a premium polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1WLS A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Ultrafine 1WLS A is characterized by a slightly broader particle size distribution. Recommended usage level is 1 to 4%.