Products in Primers & Lacquers: Slip Agent

FluoroSLIP® 731 MG is a combination of a high melting synthetic wax, carnauba wax, and polytetrafluoroethylene (PTFE) where the wax blend shows a melting peaks ranging from 84 – 110°C.

EBECRYL® 341 is a silicone-free slip additive master batch, enhances slip between cured coatings, promoting good inter-coat adhesion and glueability. It is ideal for overprint varnish and other radiation-curable formulations requiring excellent slip properties without the use of silicone additives. Functioning as a slip control agent, EBECRYL® 341 boasts labeling claims of being low-carbon footprint (PCF), VOC-free, bisphenol A-free, and solvent-free. Noteworthy features include a long pot life, high gloss, and a faster cycle time. 

Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness.Application Water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. back

The use of Deuteron OG 250 affects the surface characteristics of aqueous coating systems.The low melting point of the used paraffine-wax reduces unwelcome high slipperiness of certain binders (dispersions). Because of this property the product is also suitable as an additive to produce water-based „soft-feeling-lacquers“. On the other hand the use of Deuteron OG 250 can increase the slipperiness of coatings, when the properties imparted by the used binder are not satisfactory.Application Aqueous finishing lacquers, packing lacquers, printing inks and aqueous wood stains. „Soft-feeling-lacquers“ for industrial application (combined with matting plastic Deuteron MK). back

LUBA-print® KL 30 is a Wax dispersion / Wachsdispersion. It is used as aqueous lacquers to improve slip property and aqueous flexo printing inks to improve rub resistanc

LUBA-print® 3520 is a Water based wax dispersion. It is used as printing inks, industrial coatings, leather finishing, care products .

C-485-FBRA is a unique Alkyl-Aryl air release agent. Designed for use in conventional systems: acrylic resins, alkyds, lacquers, melamine, phenolic, polyamide, polyester and urethane.

LUBA-print® 501/X is a Wax dispersion / Wachsdispersion. It is used as an industrial lacquers to improve slip property.

LUBA-print® 434/F is a Wax dispersion / Wachsdispersion. It is used as waterbased lacquers and coating systems, to improve slip properties.

LUBA-print® 852 is a Wax dispersion / Wachsdispersion. It is used as a solvent-containing paint and lacquer systems to improve slip property, mar resistance and blocking resistance which has high resistant films and high matting effect, also in combination with silicates.