company tower banner
Deuteron Company Logo

Deuteron OG 330

1 of 86 products in this brand
Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness.Application Water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. back

Functions: Anti-Abrasion Agent, Slip Agent

Chemical Family: Waxes

End Uses: Waterborne Coating, Waterborne Ink

Features: Abrasion Resistance

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
CASE Ingredients Functions
Technologies
Chemical Description

Aqueous dispersion of polyethylene wax modified with PTFE

Features & Benefits

CASE Ingredients Features

Applications & Uses

Coating Type
Ink & Toner Type
Use Level
1.0-3.0%
Applications

Water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks.

Dosage

A definite recommendation regarding the exact dosage cannot be made. The exact dosage should be determined by own trials. Experiences have shown that a dosage of 1,0 - 3,0 % will meet the required surface properties for slip and mechanical resistance.

Processing

Deuteron OG 330 can be incorporated into the lacquer with a high speed stirrer before adjusting the viscosity. In most cases adding the product to the mill base will not result in problems. This can be taken into consideration for optimizing the production process.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Viscosityapprox. 600mPa.s-
Specific Weightapprox. 1.02g/cm3-
Melting Point of Polyethyleneapprox. 116°C-
Polyethylene/PTFEapprox. 46%-
Isopropanolapprox. 4%-
Type / Chem. baseWax-Compound--
Active Content46%-
Particle Size Distribution
ValueUnitsTest Method / Conditions
d505.2µm-
d9010.8µm-

Safety & Health

Safety Regulations

According to Regulation (EC) No. 1272/2008 Deuteron OG 330 is not classified as a dangerous product and therefore does not need to be labeled

Storage & Handling

Shelf Life
24 Months
Storage Conditions & Package Sizes

Deuteron OG 330 can be stored in its original tightly closed containers for at least 24 months at room temperature. Phase separation can occur during longer storing periods; stirring the product will remedy this. The product should be stored frost free. Plastic barrel (25 kg net)