Products in Thermal Transfer Printing

Michem® Prime 4990R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

AGITAN DF 681 F is a defoamer for all common emulsion systems. It provides the following properties that Controls foaming and aeration during paint manufacture, filling and application, Good compatibility in a wide range of systems, Retains high, and long lasting efficiency, Effective over a wide pH range.

CERETAN® MPF 2520 D is a Micronized Polypropylene wax, coated with PTFE. This product is used as an excellent scratch resistance, excellent improvement of antiblocking and slip, excellent water repellency, excellent matting agent, excellent improvement of “soft- feel” effect.

LUBA-print® WE 1620 Wax dispersion / Wachsdispersion. It is used as a aqueos lacquer and paints, aqueos Flexo- and gravure printing inks and to improve scratch- and abrasion resistance and antiblocking.

Yantai Fenglin Advanced Materials FL-2216is polyester resin for transfer printing. It has heat transfer resins, excellent flow and good storage stability, suitable for high temperature areas heat transfer properties.

WÜKONIL® RT 50 F is an aqueous wax-dispersion for waterbased coating systems. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Yantai Fenglin Advanced Materials FL-2316 is polyester resin for transfer priniting. It has heat transfer resins, high crosslink density and easy paper peel. It is suitable for high temperature areas heat transfer properties.

KURARAY POVAL™ 25-100 by Kuraray is fully hydrolyzed polyvinyl alcohol (PVOH) grade. It is used as an adhesive promoter. It provides good cohesion and adhesion to fibers, fillers and pigments. It exhibits good bonding strength and pigment binding capacity. It is suitable for modification of emulsion- and remoistenable adhesives in the paper processing industry. Aqueous solution of KURARAY POVAL™ 25-100 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. It is designed for use in postage stamps and labels.

CERETAN® ME 0418 is a Spherical, micronized, non polar Polyethylene wax. This Product is used as an improved abrasion resistance, good adhesion, very good dispersion properties and -compatibility, very good antiblocking.

Kolon Industries HIKOTACK® P-120P is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. This grade especially shows very good compatibility with polar polymer such as epoxy resin, alkyd resin and ethylene vinyl acetate(EVA) by modification of phenolic monomer. The major usages are vehicles in the coating industry and tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA).

KURARAY POVAL™ 56-98 LA by Kuraray is a water soluble, polyvinyl alcohol (PVOH) grade manufactured by alcoholysis of polyvinyl acetate. Exhibits high molecular weight, good cohesion, low ash (sodium acetate) content, good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ 56-98 LA is recommended for adhesive for flooring webs, PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry, films applications.

CERETAN® MXF 10215 is a spherical, micronized polyethylene wax, coated with PTFE.This product have applications as Paints and coatings, Printing Inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

CERETAN® A 71 is a Erucamide wax. This product is used as a good antiblocking, excellent slip properties, good recoatability and wet print properties, defoamer for the production of paper and cardboard, surface lubricant for metal production.

Michem® Lube 743 - A wax emulsion has excellent compatibility in water-based coating applications and provides water, block, and mar resistance.

Michem® Lube 743P exhibits a high degree of water resistance and is used in many water based coating applications to increase water resistance and/or surface slip.

Interactive Inks and Coatings DIYE13-04 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Michem® Emulsion 93235 - A phenol-free additive best used in water-based coatings where improved slip, rub resistance, hardness, or block resistance is needed. It provides effective mar resistance in floor polish formulations, and shine and mar resistance in auto polish formulations.

WÜKOSEAL® 2800 is a waterborne dispersion for use as oil/grease and water proof coating applied on paper and cardboard. Lamination of paper/aluminum foil.

LUBA-print® 599/D is a Wax dispersion / Wachsdispersion. It is used as a aqueous flexo printing inks, to improve abrasion resistance and mar resistance with excellent gloss aqueous lacquer systems, to improve abrasion resistance.

Michem® Glide 37 provides mar, abrasion, slip and high temperature resistance for a variety of applications within the paint and coating industries.

CERETAN® MT 9115 is a high melting, spherical, micronized Fischer Tropsch wax. This Product is used as a very good scratch resistance, improved gloss, improved slip, good antiblocking and hydrophobizing.

DEE FO 1015 integrates multiple technologies to provide a complete defoamer package of effectiveness and persistence. It is a unique defoaming technology with excellent stability and high efficiency even during the grind phase of coating manufacture. This defoamer is also alkali and acid resistant since it can be used in a pH-range between 3 and 11.

Michem® Emulsion 94340 - A phenol-free additive is best used in floor polish and overprint varnish formulations when a high degree of slip resistance is needed. It also provides durability and scratch resistance to wood applications.

Michem® Prime 4983R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

AGITAN 526 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 526 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Yantai Fenglin Advanced Materials FL-2016 is polyester resin for transfer printing. It has heat transfer resins with excellent flow properties.

Coated Products Division Linerless Label Stock 50# Offset is an offset self-wound white or canary yellow 50# offset paper coated with acrylic microsphere adhesive on one side and non-silicone release coating on the opposite side. Label material can be overprinted by flexco, inkjet and thermal transfer.

CERETAN® A 73 is a Oleamide wax This product is used as good antiblocking, excellent slip, good recoatability and wet print properties, defoamer for the production of paper and cardboard, plasticizer for fibers, release agent for rubber processing, lubricant, corrosion inhibitor, release agent in molds.

CERETAN® MXBP 60125 is a spherical, micronized functional blend based on 100% waxes from biological, renewable resources.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

KURARAY POVAL™ 28-99 LA by Kuraray is a water-soluble, polyvinyl alcohol (PVOH) grade manufactured by alcoholysis of polyvinyl acetate. It exhibits high molecular weight, good cohesion and low ash (sodium acetate) content. It possesses good adhesion to fibers-, fillers- and pigments. KURARAY POVAL™ 28-99 LA is recommended for adhesive for flooring webs, PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry and films applications.

LUBA-print® 161/T is a Wax dispersion / Wachsdispersion. It is solvent - containing varnishes and printing inks, to improve slip property.

SÜDRANOL® 100 is a very hard HD_Polyethylenewax-dispersion being specially developed for water based overprint varnishes, flexo-printing inks as well as for wood protection and the release agent sector. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUBA-print® WEF 1617 is a Water-based dispersion of a very fine, spherical, micronized Polyethylene wax coated with PTFE. It is alos used as aqueous paint-system to improve slip, scratch and abrasion resistance. And has Drop point approx. 123°C.

Yantai Fenglin Advanced Materials FL-2037 is polyester resin for transfer printing. It is fast durable component for dry blend matte powder coatings.

Michem® Guard 349 is designed to impart rub resistance, block resistance and matting properties to aqueous paints, coatings and inks.

Yantai Fenglin Advanced Materials FL-2035 is dry-mixed flatting polyester resin. It is used for transfer printing slow durable component and suitable for transfer printing matte power coatings.