Products in CASE Ingredients: Hot Melt Adhesive

ELAPOL 4028 A is a linear, saturated and (DEG) diethylene glycol-based polyester polyol by Elachem.

Coating P. Materials CX-6040 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

Novotrade Invest AS HCR- 95V is a solid polymer, fractional composition up to 3 mm. It is soluble in most industrial aromatic solvents and particularly in aliphatic ones and has a wide compatibility with different co-polymers like SBS and EVA. It is also has good adhesive properties, tackifying characteristics and heat stability.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

RELEASE W 40 S is a water-based release agent based on synthetic SBR polymers added with releasing agents.

NEVCHEM® 120 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic and alicyclic monomers derived from petroleum feedstocks.

NEVTAC® LT is a highly aliphatic petroleum based liquid tackifying resin with a low softening point designed for low temperature applications. This hydrocarbon tackifer is stabilized with 0.1% antioxidant.

The WhiteLite™ WL-32 Lightweight Mineral Powders are amorphous products obtained by the fusion of several inorganic substances mainly silica, alumina, boria, and sodium oxide, with minor amounts of calcia.

King Honor International KH Paraffin Wax 80N/L/H is having high melting point and fine crystalline structure.

SCG Chemicals LP1020P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary Of SCC Chemicals co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1020P is guaranteed its high quality for various applications.

Microcrystalline waxes are elastic and often "sticky" or "tacky". This is because of the high proportion of multi-branched hydrocarbon chains (iso-paraffins) as opposed to straight-branched chains (normals). While normal paraffins form large crystals, iso-normal paraffins form micro-crystals. These small crystals give an amorphous structure to the product making our Indramic products very flexible in contrast to the brittle nature of normal paraffins.

King Honor International KH FT WAX 80 is the medium-melt Fischer-Tropsch synthetic wax. It is specially designed to meet the above two requirements by adhesives producers. It has narrow melt range and the high onset of melt, which can balance strength and flexibility, performing excellently in hot melt adhesives.

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

Kolon Industries SUKOREZ® SU-230 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and is compatible with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-230 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers and metallocene polyolefins.

RELEASE G 100 is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. It is not recommended for hot-melt pressure sensitive adhesives. New version with high purity, enhanced solubility and easier release effect. The product is silicone free.

HIGREE™ CL1104 C5 hydrocarbon resin is a low molecular weight, narrow molecular distribution, light color thermoplastic resin produced from aliphatic petroleum-derived monomers .With good infinity with a wild range of polymers. Due to its good tack and cohesive ,it is a good tackifier for hot melt adhesives and pressure sensitive tapes.

KURARAY POVAL™ LM-22 is an ultra-low saponified polyvinyl alcohol (PVOH) grade by Kuraray. It can be self-dispersed into water with agitation. KURARAY POVAL™ LM-22 is suitable for use in hot-melt adhesives. Its shelf life is 1 year. Complies with EU Directive 67/548/EC regulation.

BONDiT™ C-52 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-52 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is especially useful as a primer and adhesion promoter for injection molding to metal and glass with polyethylene, polypropylene and polyolefins in general, PPS, PVC, PBT, ABS, polysulfone, polystyrene, polyamide (nylon 6 and 66), polyamide-imide, polyimide, polyvinylbutyral, melamine, polycarbonate, polyester, polyether, phenolic, and epoxy, with molding temperatures up to 328°C/622°F.

NEVPENE®9500 is a thermoplastic low molecular weight, C5 modified C9 hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

NEVPENE® 9511 is a thermoplastic low molecular weight, C5 modified C9 hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

SCG Chemicals LP1024P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1024P is guaranteed its high quality for various applications.

Fujian Zhongde Energy Co-Solvent Polyamide Resin 3303 is a alcohol-soluble polyamide resin.

Polybut™ 28 is a low molecular weight conventional polybutene.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Bondthane™ UD-301 is a soft and non-tacky with excellent adhesion to a variety of substrates for both coating and adhesive.

Solprene 1217 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system. Is BHT/TNPP free; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1217 is used as compounding ingredient for adhesives, as modifier for thermoplastic resins. It is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles, and heels.

Tirecycle™ MBS-800 is Particulate for thermoplastic applications. An upcycled, rejuvenated crumb rubber. It is impermeable to water or oxygen. It has good tensile strength, excellent aging/weather resistance, low stain, low electrical conductivity. It is odorless and highly stable.

Coating P. Materials CX-6080 is a Hard or soft, high or low solid content, high strength, good wash resistance, without organic Tin After reacting with cross-linking agent, it can produce high strength and high toughness effect.

SYLVARES TP 2040HM tackifier is a high softening point thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

RELEASE K 20 DL is a release agent dissolved in toluene.

BONDiT™ C-6 is an all-around general purpose, one-part primer, adhesion promoter and adhesive with moderate chemical resistance for metals, glass & ceramics, thermoplastics and thermoset polymers. BONDiT™ C-6 offers a wide range of capabilities for promoting single coat chemical bonding between coatings, sealants and adhesives of very diverse properties to mineral and polymer substrates. It is used as a primer coat for other BONDiT™ coatings and encapsulants.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

Kolon Industries HIKOTACK® P-90S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .