Products in CASE Ingredients: Hot Melt Adhesive

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flyprene SBS 792 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 40% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 102 - 100 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 188 is a light yellow aliphatic hydrocarbon resin. It is polymerized by high-purity 1.3-pentadiene and designed as a tackifier in hot melt/pressure-sensitive adhesives. This product has good heat resistance, light odor, and good compatibility with polymers like SBS, SIS, SEBS, EVA, SBR, NR, and polyisobutylene.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flytac 102 - 100F is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Dragonox® 565GR is a high-molecular-weight, multifunctional, hindered phenol antioxidant. It is mainly suitable for the stable processing of unsaturated rubber after processing, which can ensure that the material does not undergo thermal oxidative degradation during production, processing, and end-use. The added amount of this product is small, has low volatility and high color fastness, and can prevent the formation of gel.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

Flytac 190 is obtained by cracking C9, which mainly contains vinyl toluene, indene, methyl indene, and other unsaturated aromatic compounds. To have the characteristics of both aliphatic and aromatic resins C5 is added in C9, copolymerized, and modified to get C5/C9 copolymer hydrocarbon resin. As a result, this product has improved compatibility with EVA and also has good solubility in various solvents.

Z-NOX® CA22 is a product that emerges as a remarkable stabilizing antioxidant suitable for hot-melt adhesives and styrene copolymers. Featuring qualities like good extraction resistance and color performance, it serves as a stabilizer while preserving a white powder appearance. Its versatility makes it an ideal choice for multiple plasticizers.

Z-NOX® 330 is an antioxidant formulated for both plastics & elastomers applications. This essential additive serves as a protective agent against oxidation processes in a wide range of polymers and resins, including acrylonitrile butadiene styrene (ABS), polyamides, polycarbonates (PC), polyesters, polyethylenes (PE), polypropylenes (PP), polyurethanes (PU), polyvinyl chloride (PVC), and polystyrenes (PS). Z-NOX® 330 features extraction resistance, low volatility, and high-temperature processability, making it a reliable choice for preserving material integrity, performance, and lifespan.

Z-NOX® 2246 is a product that excels as a stabilizer for hot-melt adhesives and natural rubber adhesives. It boasts low volatility and minimal migration effects and holds FDA clearance for use in adhesives, rubber articles, and polyacetals. Moreover, it functions as an oxidation inhibitor in fats, oils, and paraffin wax.

SperseStab™ 1445 is a secondary aromatic amine antioxidant used in polyolefins, polyamides, styrenic polymers, polyols, polyester elastomers, hot-melt adhesives, and lubricants. The product appears as a white to off-white powder with a melting point of 95°C. It provides excellent performance over a broad range of temperatures.

SperseStab™ 2300 is a highly effective antioxidant, anti-scorch, disproportionation agent, and processing stabilizer for use in PVC, ABS, EPDM, PP, rosin ester, polyurethane, and polyethylene polymers. It is commonly used as an antioxidant for polyethylene pipes, wires, cables, and tubes, as well as greenhouse films. This unique antioxidant performs well with peroxide-cured systems and also functions as a disproportionation agent for rosin esters. Additionally, it works as an anti-scorch agent in TDI-based polyurethane systems and an anti-skinning agent in hot melt adhesives.

BurnEx® ADP494 is a nano-dispersible dry powder colloidal antimony pentoxide formulated for use as synergists with halogenated flame retardants in polymers, solvents, and adhesives.

Hauthane HD-2001 is a lightfast, polyester-based, aqueous aliphatic urethane dispersion. It's a soft, highly flexible polymer known for producing an exceptionally dry surface feel.

Ravecarb 106 is a premium polyurethane coating engineered for special applications requiring exceptional performance. With its high resistance to hydrolysis, heat and UV radiation, Ravecarb 106 offers unparalleled durability in challenging environments. Its high modulus and mechanical strength ensure reliable protection and longevity, making it ideal for demanding applications where durability is paramount.

BurnEx® ADP480 is a nano-dispersible dry powder colloidal antimony pentoxide designed for use as synergists with halogenated flame retardants in polymers, solvents, and adhesives.

Micro Powders Inc MPP-1241 is Coarse micronized HDPE wax for use as a dusting agent in hot melt adhesives.Features and Benefits Effective as a partitioning (dusting) agent for EVA, polyethylene, APAO, and styrene copolymer hot melt adhesives Can be applied to the solid adhesive (pellets or ribbons) by dusting Can be applied as a dispersion in water for underwater pelletizing Imparts a high degree of lubricity and slip with rub and mar resistance Coarse particle size is ideal for use as a surface modifier for high film build paints and coatings

Micro Powders Inc MP-15 is a coarse micronized Fischer-Tropsch wax for use as a dusting agent in hot melt adhesives.Features and Benefits Imparts a high degree of lubricity and slip with rub and mar resistance Ideal release/partitioning agent for EVA, polyethylene, APO and styrene copolymer hot melt adhesives (HMA) Can be applied to the solid adhesive (pellets or ribbons) by dusting Can be applied as a dispersion in water for underwater pelletizing Biodegradable to OECD 302C test standard Not a microplastic per ECHA definitions

Castor oil is a source of glycerine, and the combination of glycerine and hydroxyl fatty acids makes it an excellent emollient and pigment carrier for the cosmetics industry.

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

Charmax™ NH 2400 is a non-halogen intumescent flame retardant complex based on phosphorus and nitrogen.

DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.

Teckrez® C95-109L is an aromatic (C9) tackifier resin, aliphatic (C5) modified with improved color and odor. C5 modification provides improved EVA (Ethylene Vinyl Acetate) compatibility making Teckrez® C95-109L an effective tackifier in EVA hot melt adhesives. It is also very effective with SBS block polymers, SBR,and other polymers with aromatic content.

FloraRez® 120AA is a hard, thermoplastic resin with a high acid value and a near-colorless appearance. It is produced by reacting gum rosin with acrylic acid under carefully controlled conditions. This product is commonly used as a formulation component in hot melt and pressure-sensitive adhesives, as well as in soldering fluxes, inks, varnishes, coatings, and lacquers.

Jalpon™ 1200A is a solvent free, gelled calcium sulfonate compound in a mineral oil diluent. It is designed to allow the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200A will deposit an oily film. Jalpon™ 1200A contains a wax component for improved film integrity and resistance to water in thin film applications. Jalpon™ 1200A is easily emulsified for use in waterborne rust preventives and coatings.