Products in CASE Ingredients: Dispersant

MultiTech Surfactant Ais a REACH-registered; TSCA-pending sophorolipid biosurfactant (INCI: glycolipid) that can be tailored for use in a variety of industrial applications, by acting as a dispersant, emulsifier, wetting agent and more. MultiTech Surfactant A attributes:Low HLBLow/no foamingHydrophobicExcellent emulsifier MultiTech Surfactant A biosurfactants:USDA certified 100% biobasedReadily biodegradableNo prop 65 issues & no 1,4-dioxane Non-GMO & palm oil freeLow carbon footprint

DiTech MultiFunctional M is ethoxylated phosphate ester mainly used as dispersing and wetting agent as well as emulsifier in several applications.

BaseCase Monomer A is a polymeric nonionic dispersing monomer that can be fine-tuned from hard and rigid to soft and flexible to meet specific properties of dispersions while maintaining stability. Features Contains two primary hydroxyl groups Well-balanced ethoxylated chain length Applications Waterborne resins systems (e.g. alkyd, epoxy, polyester, polyurethane) Polyurethane dispersions Hydrophilic PU-systems Surfactants Fiber sizing Cosmetics Chemical building block

DiTech Dispersant is a dispersing agent for emulsion paints, plasters and adhesives.

MAKON® P105 is a nonionic eo/po block copolymer that exhibits good oil-in-water emulsification properties. It can be used in a variety of markets, including agriculture, industrial, and paints and coatings. Applications for best fit are agricultural pesticide formulations, dispersants, emulsifiers, and industrial cleaning.

G-3300 operates as an anionic surfactant with versatile applications. It is employed as a pigment dispersant in both water- and oil-based paints. Additionally, it serves as an effective wetting agent suitable for waterborne coatings. Its integration can take place during the letdown phase of production or through post-addition to the final formulation. The potential positive effects encompass gloss enhancement, improved color acceptance, and enhanced washability.

STEPSPERSE® 250 is a nonionic polymeric dispersant used for dispersing carbon black in waterborne systems. No wetting agents are necessary. Typical loading levels are 4-8% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

STEPSPERSE® 163P is an anionic polymeric dispersant suitable for iron oxide pigments in waterborne applications. No wetting agents are necessary. Typical loading levels are 2–4% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

MAKON® P104 is a nonionic eo/po block copolymer that excels in oil-in-water emulsification. Its application spans across multiple industries, including agriculture, industry, paints, and coatings. Its contribution is prominent in agricultural pesticide formulations, as well as serving as a dispersant and oil-in-water emulsifier.

STEPSPERSE® 160S is an anionic polymeric dispersant suitable for dispersing phthalo blue pigment systems in waterborne applications. No wetting agents are necessary. Typical loading levels are 10–15% solids on the weight of pigment (mass of dispersant used x mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

WACKER® Silane M1-Triethoxy is a clear, colorless liquid with an odor characteristic of alcohols. The use of WACKER® Silane M1-Triethoxy to render fillers water repellent considerably improves their dispersibility and reduces their sedimentation tendency. Mineral-filled plastics can thus be processed more easily. Additionally, resistance to moisture and chemicals is much higher.

ZETASPERSE® 3800 dispersant is specifically designed to offer robust stabilization for pigments, fillers, and various solids within aqueous dispersions. This dispersant is based on a comb polymer with a moderate molecular weight, providing strong steric stabilization. Its versatile characteristics make it suitable for a wide array of formulation needs.

VISIOMER® MPEG 500 MA is a pure and water-free methoxy polyethylene glycol methacrylate monomer, available in liquid form for easy handling. It is soluble in water and consists of approximately 12 ethylene oxide (EO) units in its chain. Industries such as coatings, healthcare, and personal care can utilize this monomer for various applications.

T-Det® PEG 3350 is a 100% active polyethylene glycol with an average molecular weight of 3350. This product can be used as a lubricant, thickener, defoaming agent, mold release agent, softener, conditioner, and dispersant. Additionally, PEGs can be used to make chemical intermediates, such as fatty acid esters.

T-Det® PEG 1500 is a polymer of ethylene oxide that is commonly used as a humectant and viscosity modifier in cosmetic and personal care products. It is off-white to white in color and appears in flake form. T-Det® PEG 1500 F is a non-ionic surfactant and emulsifier based on polyethylene glycol with an average molecular weight of 1500. It is a water-soluble liquid manufactured by Harcros Chemicals Inc. This product finds application in a wide range of industrial applications, including agrochemicals, coatings, as well as cosmetics and personal care products.

T-Det® PEG 6000 is a water-dispersible granule anti-caking agent for liquid detergents. With low toxicity and good lubricating properties, it is also used as a plasticizer and humectant in industrial adhesives.

T-Det® XD is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent. It is useful in a variety of industrial applications, such as pigment, paper coating, and polymer dispersant. Additionally, it is a good emulsifying agent for aromatic compounds and similar solvents, making it suitable for agricultural, insecticide, and pesticide formulations, as well as latex resin polymerization and metalworking fluids.

T-Det® EPO 105 is a block copolymer of propylene and ethylene oxide. This product is recommended to be used as an effective wetting agent, emulsifier, rinse aid, and chemical intermediate. It is efficiently used in products for the textile, agriculture, paper, petroleum, and paint industries.

T-Det® PEG 800 is a water-soluble, low-toxicity liquid with functions as a solvent, plasticizer, and anti-static agent. It is also a humectant with good lubricating properties. Ideal for industrial adhesives and sealants.

T-Det® PEG 4000 is a versatile ingredient used in cleaning, agrochemical, and CASE applications. With properties like water solubility and low toxicity, it functions as a solvent, anti-caking agent, and plasticizer.

T-Det® PEG 600 is a versatile agrochemical solvent, suitable for emulsifiable concentrates and soluble liquids. With low toxicity and good lubricating properties, it functions as a humectant, plasticizer, and anti-static agent in various industrial applications.

T-Det® PEG 2000 is a water-dispersible granule with low toxicity. It functions as a lubricant, humectant, anti-static agent, and plasticizer in industrial adhesives and sealants.

T-Det® EPO 104 is a block copolymer of propylene and ethylene oxide, an effective wetting agent, emulsifier, rinse aid and chemical intermediate used in products for textile, agriculture, paper, petroleum and paint industries. Its nonionic structure makes it compatible with anionic and cationic surfactants and it is stable in the presence of acids, bases, and salts.

DIACARNA™ 30M is a copolymer of α-olefin and maleic anhydride. Applications include as a compounding additive for filler dispersant and adhesion promoter for PA/GF composites.

SILCO® GA 1018 is a wetting and dispersing additive for resin-free and resin-containing formulations, used in combination with a second anionic compound. Due to its chemical structure, it is particularly recommended for all organic pigments. The preferred fields of application include: Printing inks Water-based systems

SILCO® GA 1011 is a hydroxy-functional block copolymer in water. Due to its chemical structure, SILCO® GA 1011 is particularly recommended as a wetting and dispersing additive for organic pigments and carbon black. The preferred fields of application include: Printing inks Water-based systems

SILCO® GA 1069 is a block copolymer in water that can be used as a wetting and dispersing additive for aqueous systems, and as a standalone dispersing matrix for all types of pigments. The preferred fields of application include: Printing inks Water-based systems

Bermocoll EBS 351 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Ethylan CDP 1480 is a nonionic dispersant and wetting agent. It can be used to replace nonylphenols (NP) in waterborne paints to improve color acceptance when adding a colorant to the white base. Benefits Cost-effective wetting agent Easy to handle Good foam control Increased gloss Features Very low VOC content Compatible with all other surfactant types, i.e. nonionic, anionic and cationic Stable under alkaline and acidic conditions

Bermocoll Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll E 431 X is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll E 431 X is a medium viscosity grade of ethyl hydroxyethyl cellulose

Finnfix® 700 CMC is a purified medium-viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is specifically formulated to provide optimal viscosity characteristics for a range of industrial applications. Finnfix® 700 CMC enhances water retention, improves stability, and offers excellent rheological properties in various processes. This versatile additive supports sustainable practices while meeting the high standards required in modern manufacturing environments.

Alcosperse 797 is a novel hydrophobic dispersant for water borne industrial coatings. Alcosperse 797 has good dispersing efficiency with a variety of pigments and fillers used in industrial coating formulations.

Bermocoll E 320 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll E 320 FQ is a low viscosity grade of ethyl hydroxyethyl cellulose

Bermocoll EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 5500 is a high viscosity grade of methyl ethyl hydroxyethyl cellulose.

Amadol CMA 8 is a ethoxylated cocoamide mainly used as wetting and dispersing agent in several applications.