Products in CASE Ingredients: Aluminum Compounds

Aluminium paste, non leafing

AnTec C-96 is a kind of ultra-fine aluminum silicate with high brightness and fine particle size. This product has the characteristics of good covering performance, strong coloring ability, low sieve residue, low viscosity, and easy dispersion.

Demeter Technologies Aluminum Oxide YL-5 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

For MAL Magyar Aluminum VISCOSITY OPTIMIZED HYDRATES ALOLT 704 Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

NYACOL® AL25 have been developed utilizing new innovative technology for colloidal alumina. AL25 is a colloidal dispersions of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. Typically AL25 will have up to 500 ppm Na content.

Dolomite 400# is a double carbonate of Magnesium and Calcium (CaCO3. MgCO3) Theoretically, it contains 21.7 MgO and 30.4 % CaCO3 and the remaining being CO2. How ever in nature much variation takes place in the composition. It is sedimentary origin and is supposed to have been formed due to alteration of Calcium Carbonate sediments or rocks, by seawater rich in magnesia.

SB-432 ATH developed especially for SMC, BMC, resin injection and high solids coatings, has a unique particle size distribution that provides the best possible combination of viscosity, flame, electrical and molding properties that can be derived from an ATH filler. A closely controlled top size with a large super fine faction yields rapid dispersion in resin. Excellent mold flow and wet-out characteristics result in superior surface profile, minimal porosity, even pigmentation, and excellent filler and reinforcement distribution throughout the molded part.

Huber Engineered Materials’ Hymod SB136 SG is a coarse, mechanically ground, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns.

ALBA 8L is a solvent-based, standard leafing aluminum paste with a super finesse. It is recommended for paper coatings, spray cans, and for printing inks.

For MAL Magyar Aluminum GROUND HYDRATES ALOLT 30AF Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

MAL Magyar Aluminum GROUND HYDRATES ALOLT 21AF for Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

Xyal® 100 is very fine, high-purity aluminum oxide(Al2O3) with a high specific surface area, maked aggregate and agglomerate structure. Due to the electropositive chargeability and unique particle characteristics, XYAL100 leads to specific properties in various applications.

Aluminium flake powder

MAXAL EC is a non-leafing aluminum pigments distribute themselves evenly throughout the paint film and thus reflect incident light at multiple locations. For this reason, these pigments are highly suitable for tinted paints such as colored metallic automotive paints or tinted hammer-effect enamels. Non-leafing pigments are also preferred for applications requiring excellent adhesion, such as primers.

Aqua-Brite SD1100CT is a fine particle size, bright, silver dollar pigment paste developed for water based Coatings applications. Aqua-Brite SD 1100-CT has an inert chemical coating to provide optimum gassing resistance and excellent intercoat adhesion properties.

Petra Calcium Carbonate Treated Calcium Carbonate Powder is used in a variety of industries, including plastic, master batch, paint, and electric cables.

Aluminium flake powder

Aluminium pigments, paste

Aluminium pigments, paste

Aluminium paste

Aluminium flake powder

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

SB-36 is a ground high whiteness Alumina Trihydrate (ATH) flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.

Aluminium flake powder

Aluminium flake powder

Benda-Lutz GOLDBRONZE G2021 is a non-leafing aluminum pigments distribute themselves evenly throughout the paint film and thus reflect incident light at multiple locations. For this reason, these pigments are highly suitable for tinted paints such as colored metallic automotive paints or tinted hammer-effect enamels. Non-leafing pigments are also preferred for applications requiring excellent adhesion, such as primers.

Aluminium flake powder

Demeter Technologies Aluminum Oxide YL-7 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

HN-336 is a halogen–free, medium particle size ATH product that provides low cost flame retardant and smoke suppression in a variety of applications. The particle size distribution is specifically designed for low viscosity, high filler loading levels, and excellent processing characteristics, up to 200°C. HN-336 is recommended for spray-up or hand-lay up FRP applications, filament winding, panel production, resin injection, foam materials, cast polymer and epoxy parts, coatings, adhesives, latex, vinyl and urethane compounds.

Huber Engineered Materials’ Hymod SB36 SG is a coarse, mechanically ground, surface treated ATH product that provides hydrophobicity, flame retardancy and smoke suppression in a variety of applications, such as acrylic, EPDM, EVA, SBR, polyester and polyolefin compounds. The surface modification enables this product to have low moisture and to be easily and uniformly dispersed into polymers at high loading levels without causing processing rheology concerns.

Benda-Lutz Leafing 1041 exhibits high surface tension due to which the pigment migrates towards the surface of paint film. This enrichment at the boundary protects the paint film from weathering, radiation and corrosion. Provides a strong reflective metal layer at the paint surface giving high metallic brilliance and gloss. Preferred applications include corrosion protection, reflective, maintenance, marine, roof, high heat resistance, chrome effect, and aerosol paints and coatings.

Aqua-Brite SD2700 is a medium particle size, bright, VOC free, silver dollar pigment paste developed for water based Coatings applications. Aqua-Brite SD 2700 is chemically stabilized to prevent gassing reactions in water. Metaflake’s unique water milling process guarantees excellent wetting and dispersion.

Aluminium flake powder

Manalox™ 360 is a solvent-free source of an active aluminum gellant that is perfect for UV cured inks and coatings. However, a more stable, low skinning condition can be achieved by making a 50-75% solution in ink oil solvent prior to use and/or storage. Solutions can be added to the varnish at temperatures of 150°-180°. Manalox produces isopropyl alcohol as a byproduct of the gelling reaction.

Aluminium paste

Stanlux Silver 3201 is a high performance aluminum paste with lamellar particles and narrow curve of particles size distribution. It is a fine non leafing grade specially recommended for paint formulations that require the highest hiding power.