Products in CASE Ingredients: Aluminum Compounds

AEROXIDE® Alu C 805 is a fine-particulate, fumed aluminum oxide (Al₂O₃) that is highly hydrophobized with an organosilane.

HALOX® XTAIN® A is a white, non-refractive, tannin stain-inhibiting pigment used in protective coating systems. HALOX® XTAIN® A is a highly efficient tannin stain inhibitor providing a high level of performance and compatibility in a variety of resin systems such as styrene-butadiene latexes, acrylic latexes, vinyl acrylic latexes, and solventborne alkyds.

Portaflame® SG 63 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 100 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portafill® A40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portafill® A is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A micronized functional fillers are used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A fillers are less prone to the phenomenon known as "water spotting" in comparison to barium sulfate. It has very good chemical inertness (for outdoor and chemical applications).

Portaflame® SG 10 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 10 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels.

Portafill® A25/10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A25/10 micronized functional filler is used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A25/10 filler is less prone to the phenomena known as "water spotting" in comparison to barium sulfate.

Portaflame® SG 10 LSA is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 10 LSA is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. It is not a dangerous substance (DSD or CLP) and does not contain substances of very high concern (SVHC), including their fire decomposition products.

Portaflame® SG10 LV-02 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portafill® A25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portafill® A is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A micronized functional fillers are used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A fillers are less prone to the phenomenon known as "water spotting" in comparison to barium sulfate. It has very good chemical inertness (for outdoor and chemical applications).

Portafill® A10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portafill® A is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A micronized functional fillers are used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A fillers are less prone to the phenomenon known as "water spotting" in comparison to barium sulfate. It has very good chemical inertness (for outdoor and chemical applications).

Portaflame® SG 200 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 55 LV are produced from carefully selected, synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels. It is used to make flame retardant aluminum sandwich panels.

Portaflame® SG10 LV-01 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 25 LSA is produced from carefully selected synthetic aluminum hydroxide (ATH). This range of Portaflame® LSA grades are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels in different polymer systems.

Portaflame® SG 55 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 30 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 30 LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 30 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels. Portaflame® SG 30 LV makes formulations that are flame retardant.

Portaflame® SG 50 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Blachford Aluminum Stearate 300F is a high-quality, tallow-based aluminum stearate product that finds wide use in multiple applications, including suitability for FDA 21 CFR indirect food applications. 300F grade consists of di-stearates and has excellent gel properties for improved pigment suspension and flow control.

Boratherm™ SG200 E is produced from carefully selected synthetic aluminum hydroxide (ATH). Boratherm™ SG-E grades are used in various applications because of their high thermal conductivity, flame retardancy, smoke suppression, and low viscosity. Combining these grades with finer products (ATH or Al2O3-based) makes it possible to obtain a high packing density, resulting in excellent thermal conductivity. Boratherm™ SG is perfectly suited for formulations needing good flowability. It is specially designed to offer an ultra-low surface area and large particle sizes.

Portaflame® SG 10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Boratherm™ SG150 E is produced from carefully selected synthetic aluminum hydroxide (ATH). Boratherm™ SG-E grades are used in various applications because of their high thermal conductivity, flame retardancy, smoke suppression, and low viscosity. Combining these grades with finer products (ATH or Al2O3-based) makes it possible to obtain a high packing density, resulting in excellent thermal conductivity. Boratherm™ SG is perfectly suited for formulations needing good flowability. It is specially designed to offer an ultra-low surface area and large particle sizes.

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Boratherm™ SG 200LVS is a blended product produced from carefully selected synthetic aluminum hydroxide (ATH). This product is used in applications where heat-dissipation and fire-retardancy are critical properties, e.g., in thermal interface materials (including electronic vehicle battery heat management), casting resins for power transformers, and potting and encapsulating materials in electric and electronic applications. The particle size distribution of the Boratherm™ SG 200LVS is already optimized, so blends with other finer or coarser aluminum-containing grades are no longer needed to obtain the optimum packing density, resulting in the right balance between flow and thermal conductivity.

Blachford Aluminum Stearate 200F is a high-quality, tallow-based aluminum stearate product that finds wide use in multiple applications, including suitability for FDA 21 CFR indirect food applications. 200F grade consists of di-stearates and has excellent gel properties for improved pigment suspension and flow control.

PhosGard® 300 is a product that represents a highly efficient phosphorus flame retardant system that is insoluble in water and organic solvents. PhosGard® 300 has a white powder appearance which makes it suitable for both thermoplastics and thermosets, offering effective non-halogenated flame retardancy.

Polyfill® 405SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 301SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 402SM is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 403 is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 407 Alumina Trihydrate is a specialized product meticulously designed for wire/cable-elastomers, coatings, and thermoset/plastic applications. Engineered with precision, it boasts a controlled particle size distribution and essential physical properties, empowering compounders to achieve elevated loading levels and superior overall performance. The enhanced surface area enables exceptional surface finish and impact characteristics, while meticulous particle distribution control allows for maximum loading levels.

Polyfill® 30 is a versatile flame retardant and smoke suppressant, finds application across various sectors. Ideal for consumer goods, it excels in carpet and upholstery applications. In electrical and electronics, it enhances wire and cable jacketing and insulation. This product is a key player in plastics, elastomers, and composite materials, functioning as a flame retardant and smoke suppressant.

Polyfill® 301 Alumina Trihydrate is meticulously crafted for thermoset plastic and CASE applications necessitating heightened loading levels. This medium grind series enhances surface area, promoting improved flow and surface finish properties. By incorporating Polyfill® 301, you amplify flame retardancy and smoke suppression, bolstered by increased H2O molecule availability.