Products in Alkyds

KELSOL® 3969-G2-70 is a water-dispersible, HAPs-free, chain-stopped alkyd designed to give a combination of good corrosion, humidity, and water resistance without the use of HAPs co-solvents.

Short-oil alkyd resin

SOAL 632 70% are Long Oil Alkyds that have decorative enamels for interior & exterior applications and varnishes.

BENASOL R 40D by Benasedo SpA is a short-oil alkyd resin based on dehydrated castor oil. It exhibits high mechanical performance. BENASOL R 40D is used as non-yellowing air-drying and low-bake enamels with air and bake applications.

Niralac X101 SD19507-83 is a pigment concentrate that is used in decorative enamels and undercoats.

BECKOSOL® 12-054 is a high-viscosity, short oil TOFA alkyd.

Duramac® 207-1109 is a short oil alkyd resin based on coconut oil. Manufactured in North America. All components of this product are listed on the DSL.

Terlon™ 1147 A is a Lawter™ linseed alkyd. Terlon 1147 A alkyd is known for its excellent pigment wetting ability and fast hard-drying properties. Terlon 1147 A alkyd is an essential ingredient in many oil-based printing inks. This alkyd’s ability to develop and maintain color strength with minimal bronzing and provide flow and leveling where required make Terlon 1147 A an important formulating tool. Terlon 1147 A is very compatible with most ink vehicles and serves to stabilize ink formulations that do not hold up on long runs. Metal decorating inks based on this alkyd bake very fast and form hard abrasion-resistant, glossy surfaces.

Duramac® 54-5465 is a medium oil alkyd intended for use in traffic and marking paints. This resin offers a fast dry time as well as good pigment wetting characteristics. Manufactured in North America. All components of this product are listed on the DSL.

Long-oil isophthalic acid alkyd resin

Duramac® HS 207-2706 is a short oil high solids alkyd resin for baking systems. It is a compliant tofa-based alkyd cut in a HAPs-free solvent. This resin exhibits good gloss retention and excellent balance of corrosion and humidity resistance. Manufactured in North America. All components of this product are listed on the DSL.

Tunasresin 4603-55 is Fast dry, excellent gloss, good durability, good yellowing resistance & color retention.

Disvalkyd 501 is used in letter press offset & screen inks.

CA-3045 is a Medium Oil, Penta Erithritol esterified Alkyd Resin, modified with Castor Oil.

Niralac MV 350 – 55 is used in interior and exterior general purpose paints.

MPC-PROKIM Chemicals SO65W60 is a long oil air drying alkyd resin based on soya bean oil. It presents a good gloss retention, a good durability, a good brushability and a good resistance to yellowing.

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and color retention, good flow, superficial hardness and ease of brush application. It is suggested for white and colored air-drying enamels with high solid content, in the building sector and for internal and external maintenance.

BECKOSOL® 90-185 is a high-solids, short-oil, non-drying, coconut-oil alkyd supplied at 80% non volatile in methyl propyl ketone and n-butyl acetate.

Unikyd L- 80 offers a comprehensive array of synthetic resins including long, short, medium oil alkyds, hammertone medium, rosin modified, chain stopped & styrenated alkyds. Used in High gloss paint enamels,Varnishes

Inokem® 1105 is an APEO free anionic emulsion of alkyd resin for low VOC interior and exterior applications. Thanks to the Leafteck® technology, Inokem® 1105 can be formulated with no drier (matt) or much lower drier levels (low PVC paints). Early tack reduction hardness development, less yellowing with time are key improvements. Inokem® 1105 bio content is around 50% on dry product.

MPC-PROKIM Chemicals TO65W70BV is a long oil alkyd resin based on soya bean fatty acid. It presents a good gloss retention, a good durability, a good brushability and a good resistance to yellowing.

Duramac® HS 55-5543 is a 100% solids alkyd typically used to improve adhesion and wetting properties of exterior architectural latex paints. This resin can also be used as a modifier in lower solids alkyd formulations to lower the VOC of these paints. Manufactured in North America. All components of this product are listed on the DSL.

Novalkyd L2022-75AN is recommended for white enamels with excellent non-yellowing property, even in the dark. A very good gloss, brush ability, flow, surface and through drying, complete the description.NOVALKYD L2022-75AN is suitable for "do it yourself " enamels, industry and marine paints.

Alkid® C-41 SS-75 is a Short-oil alkyd resins used in Nitrocelulose products for wood protection and Stoving enamels for Metal Protection. It is the most popular in the paint and varnish industry, based on synthetic resins. Our production covers long-oil, medium-oil, short-oil and high-solid alkyd resins.

KELSOL® 585-W-43 is a water dispersion alkyd resin, supplied without co-solvent, which exhibits extremely fast water-release characteristics. It has fast air dry as well as very good adhesion and toughness. * This product contains less than 2% HAP solvent.

Jiangsu Euiomaoda Paint HC8370DY-X is a mixed fatty acid modified short-oil alkyd resin.

Archemis® QD 201-2195 is a specially modified high solids alkyd supplied at 96% solids in mineral spirits. Coatings formulated at 250 g/l VOC provide excellent set- to-touch, tack-free, dry hard and through-dry characteristics. Gloss and yellowing properties are similar to 450 g/l VOC coatings based on 70% solids conventional long oil alkyds. Formulations at 150 g/l VOC are also possible. Manufactured in North America.

Balkyd 640S-80WS is a long oil, oxidative drying alkyd resin, modified with vegetable oil.

Endmoun ST 60 T is a very fast surface draying with excellent through-hardening when apply on metal surface.

Tunasresin 3401-70 is Fast cure, good gloss & gloss retention, flow properties, good hardness, gcx»d adhesion

Balkyd 630S-70WS is a long oil oxidative drying alkyd resin, modified with vegetable oil,soyabean or sunflower oil.

Serkyd FA26T60 is a sunflower oil fatty acid based, short oil alkyd resin is used in polyurethane primer and paints, cellulosic filler and varnishes.

BECKOSOL® 12-102 is a chain-stopped alkyd to be used as a single resin or in combination with other resins.

BAS 302 X-60 is a short oil alkyd resin based on coconut oil fatty acid which offers very good hardness, gloss and gloss retention and adhesion.