Products in Alkyds

ISALCHEM 145 is primary mono-branched alcohols mixture with alkyl chain length of 14 to 15 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 125 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 15 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

COSMACOL AES-70-2-24 AL is the sodium salt of linear fatty alcohol C12-14 poly-(2)-ethoxy sulfate. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 123 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 13 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DIAMMIN KLG-11154 70% is a mono oleyl amine poly-glycol ether, based on Oleyl amine, ethylene oxide and propylene oxide and diluted with weight 30% water. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIALCHEM 25/75 Alcohol is primary essentially linear alcohols mixture with alkyl chain length of 12 to 15 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Crestakyd® 41-6010 is a universally employed resin in primers, enamels and hammer finishes. It is suitable for air dry, low bake and general purpose stoving industrial paints. The resin is compatible with urea and melamine formaldehyde resins and is therefore suitable for stoving finishes.

Crestakyd® 30-5049 is a short oil alkyd based on linoleic rich fatty acids supplied in xylene and designed for use in wood coating applications. It has been designed for use in acid curing finishes for wood. This resin provides excellent cold check properties, good wet heat resistance, good stackability and excellent all round properties.

Crestakyd® 30-5067 is a fast drying short oil alkyd supplied in xylene for use in airdry and force-dry primers and topcoats. It is recommended for use in air-dry and force-dry primers and topcoats in a variety of general industrial metal coating applications.

Crestakyd® 10-3507 is a high solids, fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This top quality, long oil alkyd can be used for decorative gloss paints and varnishes.

Crestakyd® 20-9074 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This medium oil air drying alkyd can be used for primers and other air-dry industrial finishes. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties.

Crestakyd® 20-9509 is a high solids, medium oil alkyd based on linoleic rich fatty acids supplied in butyl acetate and designed for use in wood coating finishes. It has been designed for use in high solids acid curing finishes for wood. Coating systems based on this resin exhibit fast cure, excellent pot-life and good wet heat resistance.

Crestakyd® 10-2505 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 10-3000 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It is used for interior and exterior decorative enamels, marine and topside paints. Also suitable for undercoats, maintenance primers and floor varnishes.

Crestakyd® 30-9055 is a rapid solvent release alkyd that has high stability and good cold check test. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This short oil alkyd can be used for easy sanding NC sealers and NC finishes.

Crestakyd® 20-9021 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This medium oil air drying component is an economical chain stopped alkyd used for fast drying machinery enamels, primers and other air-dry industrial finishes.

Crestakyd® 44-5043 is a linoleic/wood oil alkyd modified with both rosin and phenolic. It is supplied as a 60% non-volatile solution in xylene. It has been designed for use in fast drying industrial primer applications with excellent adhesion and resistance to corrosion.

Crestakyd® 20-5036 is a chain stopped alkyd with excellent drying, gloss and weathering properties. This chain stopped, medium oil is an essential paint and coating component, offering excellent durability, good flow and leveling properties. It can specifically be used for primers, general air dry industrial finishes and machinery enamels.

Crestakyd® 10-1066 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 10-2020 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 41-5009 is a styrene-modified alkyd based upon a blend of mixed non-yellowing oils and supplied as a solution in xylene. It is a very versatile resin that gives paints with high gloss and good resistance properties. It is also used in the marine industry for quick drying coatings.

Crestakyd® 30-5071 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes.

Crestakyd® 10-4007 is an air drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. It has been specifically formulated for use in artist's paints and for applications requiring higher flash points.

Crestakyd® 10-1022 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 30-5016 is a chain stopped alkyd for rapid air drying industrial paints and low bake enamels with excellent resistance to oils, greases and water. It is suitable for use in vehicle and machinery finishes, can be air-dried, force-dried or stoved. Air drying finishes are tack free in 30 minutes with good through drying properties. Crestakyd® 30-5016 has excellent resistance to oils, greases and water.

Crestakyd® 10-1025 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 10-1019 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

Crestakyd® 10-2033 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and D.I.Y house paints, including primers, topcoats and varnishes. It has good compatibility with “universal” colorants.

Crestakyd® 30-5068 exhibits rapid drying characteristics and fast hardness development. It has very good weather resistance, excellent film build and attractive gloss. It can be used for NC finishes, acid hardening finishes and in combination with low reactivity melamine resins for industrial stoving enamels and automotive finishes.

Crestakyd® 10-2023 is a high-solid iso-phtalic, has excellent brushability and flow characteristics, as well as weathering resistance. It is recommended for the production of low VOC exterior paints and wood stains, impregnations. It is also compatible with conventional long oil alkyds and thixotropic resins and can be used in combination to improve the solids of the resultant paint.

Crestakyd® 30-5005 is short oil fast drying alkyd resin with high hardness. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This short oil air drying alkyd is used in air drying primers and finishes, metal and wood application.

Crestakyd® 30-5057 is a rapid solvent release alkyd that has high stability and good cold check test. It is an essential paint and coating component, offering excellent durability, good flow and leveling properties. This wood finishing, short oil alkyd can be used for easy sanding nitrocellulose sealers and finishes.

Crestakyd® 20-5024 exhibits rapid initial and through drying characteristics and gives excellent gloss and good weathering resistance / color stability. This medium oil air drying alkyd can be used for air drying and low bake industrial finishes and vehicle refinishes.

Crestakyd® 20-5029 is a rapid drying alkyd that has excellent gloss / weathering resistance and flow characteristics. This chain stopped, medium oil air drying alkyd is an essential paint and coating component, offering excellent durability, good flow and leveling properties. It can specifically be used for primers, general air dry industrial finishes and machinery enamels.

Crestakyd® 30-9502 is a short oil, high solids, chain-stopped alkyd based upon linoleic-rich fatty acids, supplied in a 3:2 w/w blend of xylene / methoxy propanol. The high solids allow this product to be formulated in VOC compliant topcoats (max. 420 g/l) and DTM primers, both displaying excellent salt spray resistance.

Crestakyd® 44-5027 is a short oil alkyd with phenolic resin and rosin modification. It exhibits rapid initial and through drying and high resistance to water, fuels and oil. This modified air drying alkyd has good flexibility and adhesion to metallic substrates.