Products in Resins & Binders: Concrete

Diofan® A 610 is a dispersion classified under CASE Ingredients, functioning as a binder and resin. Specifically designed for use in various applications within the Paints and Coatings sector, it excels in Other Paints and Coatings Applications. With its distinctive physical form, Diofan® A 610 offers optimal performance as a versatile and effective ingredient in coating formulations.

VINNAPAS® EAF 7815 (Scale-up Product) is a very low Tg aqueous polymer dispersion based on the monomers vinyl acetate, ethylene, and acrylic esters. It is produced without the use of plasticizers or alkylphenol ethoxylate (APEO)-containing compounds. Due to its low odor, it is also suitable for indoor use.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® E 15/45 is a copolymer composed of approximately 85 wt.% vinyl chloride (VC) and 15 wt.% vinyl acetate (VAc). It serves as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® CEZ 3031 is a medium-particle-size, protective colloid-containing aqueous dispersion of a terpolymer of vinyl acetate, ethylene, and vinyl chloride. The principal feature of VINNAPAS® CEZ 3031 is its wide range of uses in coating systems containing opacifying pigments. The dispersion is low in odor and is produced without the use of alkylphenol ethoxylate (APEO)-containing compounds.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

PRIMIS® AF 1000 is a composite dispersion with an aqueous base, which incorporates unique characteristics derived from both organic and inorganic components. The dispersion particles consist of inorganic silica particles at their core, while the outer shell is composed of acrylate copolymers. Notably, the manufacturing process of PRIMIS® AF 1000 ensures that it is free from alkyl phenol ethoxylate (APEO) compounds.

VINNAPAS® EF 8001 (CTY) is an aqueous dispersion of a vinyl acetate-ethylene copolymer. It serves as a superior alternative to vinyl-acrylic copolymers, offering both enhanced performance and environmental benefits. This product possesses a low glass transition temperature (Tg) as well as a low minimum film formation temperature (MFFT).

VINNOL® E 18/38 is a copolymer consisting of approximately 82 wt.% vinyl chloride (VC) and 18 wt.% vinyl acetate (VAc). It is primarily utilized as a binder in printing inks and surface coating compounds. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

VINNAPAS® EZ 3019 is a protective colloid-stabilized dispersion of a vinyl acetate, ethylene, and vinyl ester terpolymer. It has a medium particle size. VINNAPAS® EZ 3019 is produced without the addition of any plasticizers or solvents, and it is also free from alkyl phenol ethoxylate (APEO)-containing compounds.

VINNAPAS® SAF 34 is a fine-particle dispersion of a special styrene/acrylate copolymer. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. VINNAPAS® SAF 34 exhibits excellent pigment binding properties, great adhesion to inorganic substrates, very good water resistance, excellent alkali resistance, very low dirt pick-up, and great versatility.

VINNAPAS® EF 7877 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and exhibits excellent filler compatibility. This product has high filler acceptance and provides good adhesion to various substrates, including concrete, metal, wood, and plastics.

VINNAPAS® EF 7865 is a low Tg aqueous polymer dispersion formulated with vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and demonstrates excellent filler compatibility. This product exhibits high filler acceptance and provides good adhesion to various substrates such as concrete, metal, wood, and plastics.

VINNAPAS® EP 7860 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers. This dispersion exhibits excellent compatibility with fillers, allowing for high filler acceptance. Moreover, VINNAPAS® EP 7860 demonstrates special extension recovery properties, particularly at high filler levels. It also offers good adhesion to a variety of substrates, including concrete, metal, wood, and plastics.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SILRES® BS 6920 is a silane-terminated binder that utilizes α-silane technology. It is specifically designed for the impregnation of mineral substrates or as a thin layer of coating on mineral surfaces. The formulations based on SILRES® BS 6920 are commonly used for stain-resistant impregnation and coating of various mineral substrates. These substrates can include polished or non-polished concrete floors, paving stones, clinker, bricks, and natural stone. By applying SILRES® BS 6920, the mineral surfaces become more resistant to stains and discoloration, helping to maintain their appearance and durability over time. The binder provides a protective barrier that enhances the performance and longevity of the treated mineral substrates.

VINNAPAS® 224 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

SILRES® BS 6921 is a silane-terminated binder based on α-silane technology for the impregnation of mineral substrates or as a thin-layer coating for mineral substrates. It can be used in combination with SILRES® BS 6920 when a softer formulation is required.

SILRES® BS 290 is a solventless silicone concentrate based on a mixture of silane and siloxane. It can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents are high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

GENIOSIL® XB 502 is a silane-terminated binder based on alpha-silane technology, specifically designed for formulating high-strength adhesives. It finds applications in various areas, including building and construction adhesives, do-it-yourself projects, and industrial adhesives. One of its specific uses is for wood-to-wood bonding.

VINNAPAS® 202 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNAPAS® 240 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a flexible copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.

VINNAPAS® 825 ED is an all-round construction dispersion for two-component dry mix mortars, specifically suited for cement admixtures and two-component cementitious self-leveling compounds. It is based on a semi-flexible terpolymer of vinyl acetate, ethylene, and vinyl chloride and belongs to the product class VINNAPAS® ED, enhancing the adhesion and mechanical strength of mortars.

SILRES® WH 100 A is a water-reducible, solvent-free emulsion of a functional silicone resin. It is a water-based product that offers several properties and benefits. When applied, it creates an eye-catching water beading effect, enhancing the appearance of the treated surface. Additionally, it significantly reduces capillary water absorption, providing protection against moisture. SILRES WH 100 A can be used over various substrates, including metals, concrete, and others, to impart its water-repellent properties.

VINNOL® E 15/40 A is a hydroxyl-containing copolymer comprising approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. Its primary application lies in serving as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.

VINNAPAS® 822 HD is a dispersion with excellent hydrophobic properties combined with very low flammability. VINNAPAS® 822 HD can be used as a binder for coating systems containing an opacifying pigment, such as polymer-modified plasters. VINNAPAS® 822 HD is a dispersion of a vinyl chloride, ethylene, and vinyl ester terpolymer.

VINNOL® E 15/48 A is a hydroxyl-containing copolymer composed of approximately 84 wt.% vinyl chloride (VC) and 16 wt.% acrylic acid esters. It serves as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

SILRES® WH 101 A is a water-reducible, solvent-free emulsion of a functional silicone resin. It can be applied as-is or as a formulated product to serve as a water-repellent treatment. SILRES WH 101 A improves substrate longevity when applied over wood or many other materials.