Products in Resins & Binders: Elastomers & Rubbers

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 705K (ULS) is a vinyl acetate-ethylene copolymer that is protected with PVOH. It has a moderate viscosity and is produced without the use of formaldehyde donors. The polymer's backbone provides the dried adhesive film with toughness and flexibility, which remain even when exposed to water immersion and temperature fluctuations.

VINNAPAS® EP 705A (ULS) is a vinyl acetate-ethylene copolymer specifically designed as a base polymer for high-performance adhesives. It is produced without using formaldehyde donors. The low viscosity of VINNAPAS® EP 705A (ULS) and its excellent Newtonian flow behavior make it well-suited for high-speed packaging machines.

VINNAPAS® EP 706 is a vinyl acetate-ethylene-based copolymer that is produced without the use of formaldehyde donors. It offers good machinability and strong wet tack, providing enhanced adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706 exhibits very high plasticizer and solvent viscosity thickening responses.

WACKER® Polymer AL 60 is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 60 is used as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers. Applications include sealants, silicone sealants, and special raw materials for silicone sealant compounding.

WACKER® Polymer AL 55 M is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear to slightly cloudy liquid that is immiscible with water. WACKER® Polymer AL 55 M is used as a raw material for the production of alkoxy crosslinking RTV-1 silicone rubbers.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Ottopol 151 is an anionic acrylic emulsion with a low glass transition temperature of -25°C. It showed excellent water resistance after a 4 hour ambient cure of a wet, 25 mil thick film. This product is mainly used for elastomeric roof coatings.

ACCESS® SFR OH 6,000 is a hydroxyl or silanol functional fluid with a medium viscosity of 6,000 cP. This pure fluid is ideal for use as an Anti-Structuring additive in high consistency silicone rubber and for the treatment of fillers. ACCESS® SFR OH 6,000 has excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ.

ACCESS® SFR OH 70 is an intumescent coating solution specifically designed to provide superior fire protection for a wide range of structural steel applications. Its advanced formula is designed to expand and form a thick, insulating char layer that helps to prevent steel from reaching critical temperatures during a fire, providing excellent protection for both people and property.

ACCESS® SFR OH 20,000 is a highly efficient superplasticizer designed to improve the workability and flow of concrete mixtures. This product is specifically formulated to reduce the water-to-cement ratio, resulting in improved compressive strength and durability of the final product. By increasing the fluidity of the mixture, ACCESS® SFR OH 20,000 also helps to reduce the risk of cracking and segregation in the concrete.

ACCESS® SFR OH 2,000 is a polyether-based superplasticizer designed to improve the workability and flow of concrete mixtures. This product is specifically formulated to reduce the water-to-cement ratio, resulting in improved compressive strength and durability of the final product. By increasing the fluidity of the mixture, ACCESS® SFR OH 2,000 also helps to reduce the risk of cracking and segregation in the concrete.

Hauthane L-2245 is an anionic, aliphatic, aqueous polyurethane dispersion with a low activation temperature. Features: May be crosslinked for improved adhesion and heat-resistance. Non-crystalline nature. Low level of n-methyl pyrrolidone (NMP) co-solvent (-2%).

Hauthane L-2255 is a high solids, anionic, aliphatic, aqueous polyurethane dispersion. Features: High solids (48%), co-solvent free. Can be crosslinked to improve bond strength and heat-resistance. Non-crystalline nature.

Texicryl® AD9122 is a modified styrene acrylic copolymer emulsion that offers excellent water resistance and adhesion to various substrates including wood, rubber and metal. It has been designed for the formulation of low VOC waterbased coatings and can be formulated as mulch coatings for various mulch subatrates.

AGC Chemicals Americas, Inc. Fluon+™ TL-368 is a white PTFE (polytetrafluoroethylene) micro-powder that is suitable for compounding in rubber and plastics. The particles of this product are of intermediate hardness, permitting mixing without further breakdown. The slight fibrous nature of Fluon+™ TL-368 will give greater viscosity in fluids. This product is suitable for use in food contact applications.

AGC Chemicals Americas, Inc. Fluon+™ FL1710Z is a white finely divided PTFE (polytetrafluoroethylene) micropowder which is easy to disperse in a wide range of liquids. FL1710Z is particularly suitable for use in surface coatings, metal decorating inks, low viscosity lubricating oils and is readily dispersed in liquids using either high or low shear mixing. This combination of properties makes FL 1710Z very useful in coating formulations and makes it suitable for use in food contact applications.

Rovene 4076 is a medium-firm, carboxylated styrene-butadiene emulsion recommended for use in architectural coatings and interior primers for dry wall application where low perm ratings are required. Rovene 4076 is designed to exhibit tight, continuous films providing the following performance advantages: moisture vapor barrier properties, superior cold temperature coalescence, and ASTM E-96 perm ratings of ~0.5.

Domalkyd 1526 55 W is an alkyd resin modified with soybean oil developed for finishes for wood and metal for indoor as well as for outdoor applications.Features & BenefitsAir drying automotive repair finishesExcellent weather resistance

SiwoPUD® -990F is a aqueous, aliphatic polyurethane dispersion based on polycarbonate.

FloraRez® HR is gum rosin that has been subjected to a high degree of hydrogenation. This results in a nearly colorless thermoplastic resin that has excellent thermal and oxidative stability characteristics, which are a result of the hydrogenation process. Compared to unmodified gum, wood, and tall oil rosins, FloraRez® HR offers the highest degree of color and solubility stability for its derivative products.

SYNTRAN® AC 1110 is a styrene-modified acrylic copolymer emulsion for rubber coatings. Formulations containing SYNTRAN® AC 1110 can be adapted to the requirements of a variety of different applications. Features and Benefits: Good adhesion Good leveling properties Good abrasion resistance Very good flexibility

Rovene® 6120 is an all acrylic polymer that offers a balance of properties within elastomeric roof coatings. Rovene 6120 can be formulated to meet or exceed ASTM 6083, Type 1. Rovene® 6120 exhibits adhesion to substrates, balance of stength and flexibility with excellent water resistance.

Rovene 6121 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. Rovene 6121 also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

SYNTRAN® AC 1072 is a modified-acrylic copolymer with improved flexibility, which is very suitable as a polymer for leather applications and glove coatings. Formulations based on SYNTRAN® AC 1072 for various applications are available upon request. Features and Benefits: High gloss Very high flexibility Good cold flexibility High elasticity Very good adhesion to a wide variety of substrates Good resistance to soiling Good water resistance

Rovene 6034 is a versatile polymer that can be used in multiple paint and coatings applications. It can be formulated for interior paints, outdoor landscaping coatings, or coatings for metal.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Rovene 6026 is a styrene-acrylic emulsion polymer that can be formulated in multiple coating and paint applications. It provides a strong film at room temperature for use in low sheen interior flat wall paints. This product allows the formulator to minimize the level of coalescent. Rovene 6026 can also be used in outdoor landscaping coatings due to the adhesion characteristics and compatibility with iron oxide dispersions.

Rovene 6119 is a low glass transition temperature styrene-acrylic polymer that offers flexibility during movement of the substrate and water resistance. This polymer also exhibits excellent tensile strength and maintains elongation properties when compounded with fillers.

SYNTRAN AC 6130 is a modified water-based acrylic copolymer that combines two different ionic structures in the same interpenetrating polymer network (IPN). This technology allows the formulator to take advantage of a cationic acrylic without the traditional compatibility issues as it can be formulated like a conventional anionic water-based acrylate. This unusual combination provides excellent adhesion to a wide range of difficult substrates. Coatings formulated with SYNTRAN® AC 6130 consistently exhibit a lasting toughness and flexibility which provide a superior foundation for many of today’s advanced end products. Features and Benefits: Excellent solvent resistance and abrasion resistance Short drying times High crosslinking density Improved compatibility Low solvent demand Excellent adhesion, hardness and scratch resistance. Very good water and grease resistance. Good resistance to coffee and red wine in white coatings, clear when wet, reddish color on wood in clear coatings.

FloraRez® PR is gum rosin that has undergone partial hydrogenation. It is a pale-colored resin with excellent thermal and oxidative stability characteristics due to the hydrogenation process. Compared to unmodified gum, wood, and tall oil rosins, it offers a higher degree of color and solubility stability for the derivative products produced from it.

POLYTONE™ AP 108 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.