Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Composite Materials
Products in Composite Materials
6,383 Products found in Composite Materials
Browse
Applications
Show All 7 Categories
Filters
Suppliers
Applications
Functions
End Uses
Processing Methods
Mechanical Properties
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
jER™ YX8000D
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Bisphenol A Type Epoxy, Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives
End Uses:
Radiation Curable Coating, Semiconductor Applications
Compatible Substrates & Surfaces:
Glass, Fibers & Fabrics, Concrete, Metal, Ceramic, Aluminum, Plastics, Steel
Features:
Transparency, Low Chlorine Content, Faster Cure Time, LED-curable, Radiation Curable, Fast Cure, UV Curable, Excellent Adhesion
jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YX7105
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Impact Modifier, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Aluminum, Steel, Fibers & Fabrics, Glass, Plastics, Metal, Concrete, Ceramic
jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YX4000
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Aluminum, Steel, Fibers & Fabrics, Glass, Plastics, Metal, Concrete, Ceramic
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YL980
Polymer Name:
Epoxy Resins & Compounds
Functions:
Coupling Agent, Resins, Binders & Matrix Materials, Adhesion Promoter, Binder & Resin, Resin
Chemical Family:
Bisphenol A Type Epoxy, Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives
End Uses:
Underfill, Semiconductor Applications
Compatible Substrates & Surfaces:
Concrete, Aluminum, Fibers & Fabrics, Metal, Ceramic, Plastics, Steel, Glass
Features:
Low Chlorine Content, Excellent Electrical Insulation, Good Mechanical Properties, Water Resistant, Chemical Resistant, Electrically Insulating, Abrasion Resistance, Water Resistance, Improved Dimensional Stability, Reduced Wear, Good Electrical Properties, Chemical Resistance, Heat Resistance, Improved Flexibility, Flame Retardant
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ 1750
Polymer Name:
Epoxy Resins & Compounds
Functions:
Binder & Resin, Resins, Binders & Matrix Materials, Resin, Adhesion Promoter, Coupling Agent
Chemical Family:
Bisphenol F Type Epoxy, Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives
Labeling Claims:
High Purity
jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ Epoxy YX7110
Polymer Name:
Epoxy Resins & Compounds
Functions:
Binder & Resin, Resins, Binders & Matrix Materials, Impact Modifier, Resin, Adhesion Promoter, Coupling Agent
Chemical Family:
Epoxy & Epoxy Derivatives
jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ 4250
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Impact Modifier, Adhesion Promoter, Plasticizer, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Aluminum, Steel, Fibers & Fabrics, Glass, Plastics, Metal, Concrete, Ceramic
jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
SymaLITE®
Functions:
Molding Compound
Chemical Family:
Polyolefins, Polypropylenes (PP)
Reinforcement Material:
Polypropylene (PP), Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Engine Covers, Covers, Headliners, Gearbox Covers, Undershield, Structural Components
SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.
Mitsubishi Chemical Group Corporation
Mitsubishi Chemical Group GMT
Functions:
Molding Compound
Chemical Family:
Polypropylenes (PP), Polyamides, Polyolefins
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Structural Components, Battery Trays, Fuel Tank Covers, Wall Panels, Undershield
Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.
Mitsubishi Chemical Group Corporation
jER™ YX8040
Polymer Name:
Epoxy Resins & Compounds
Functions:
Binder & Resin, Resins, Binders & Matrix Materials, Resin, Adhesion Promoter, Coupling Agent
Chemical Family:
Epoxy & Epoxy Derivatives
Labeling Claims:
High Purity
jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
GMTex®
Functions:
Molding Compound
Chemical Family:
Polypropylenes (PP), Polyamides, Polyolefins
Reinforcement Material:
Glass Fibers
Processing Methods:
Compression Molding
End Uses:
Structural Components, Instrument Panels, Tail Gates, Seats
GMTex® is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications
Mitsubishi Chemical Group Corporation
jER™ 1256
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Impact Modifier, Adhesion Promoter, Plasticizer, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Bisphenol A Type Epoxy, Epoxy & Epoxy Derivatives
Compatible Substrates & Surfaces:
Aluminum, Steel, Fibers & Fabrics, Glass, Plastics, Metal, Concrete, Ceramic
jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YX7400N
Polymer Name:
Epoxy Resins & Compounds
Functions:
Resins, Binders & Matrix Materials, Impact Modifier, Adhesion Promoter, Coupling Agent, Binder & Resin, Resin
Chemical Family:
Epoxy & Epoxy Derivatives
End Uses:
Semiconductor Applications, Conformal Coating
Features:
Excellent Elasticity, Reduced Wear, Good Mechanical Properties, Abrasion Resistance, Impact Resistance, Good Elasticity, Improved Flexibility, High Impact Resistance, Excellent Resilience, Improved Dimensional Stability
jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
jER™ YL983U
Polymer Name:
Epoxy Resins & Compounds
Functions:
Coupling Agent, Resins, Binders & Matrix Materials, Adhesion Promoter, Binder & Resin, Resin
Chemical Family:
Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol F Type Epoxy
End Uses:
Underfill, Semiconductor Applications
Compatible Substrates & Surfaces:
Concrete, Aluminum, Fibers & Fabrics, Metal, Ceramic, Plastics, Steel, Glass
Features:
Low Chlorine Content, Excellent Electrical Insulation, Good Mechanical Properties, Water Resistant, Chemical Resistant, Low Viscosity, Electrically Insulating, Abrasion Resistance, Water Resistance, Improved Dimensional Stability, Reduced Wear, Good Electrical Properties, Good Elastic Recovery, Chemical Resistance, Heat Resistance, Improved Flexibility
jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Wacker Chemie AG
NEXIPAL®
Functions:
Laminate
End Uses:
Sensors, Actuators, Electrodes
NEXIPAL® is a versatile EAP (Electroactive Polymer) laminate designed for actuators and capacitive sensors. It is composed of one or multiple ultrathin silicone layers, known as ELASTOSIL® Film, which have a thickness ranging from 20 to 400 µm. These silicone layers are coated with specialized electrodes, laminated together, and then precisely cut into the desired shape. Multiple layers can be stacked on top of each other to achieve the desired performance.
Wacker Chemie AG
SILRES® MK Flakes
Functions:
Resins, Binders & Matrix Materials
Chemical Family:
Silicones
SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.
Wacker Chemie AG
SILRES® MK Powder
Functions:
Resins, Binders & Matrix Materials
Chemical Family:
Silicones
SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.
Wacker Chemie AG
VINNAPAS® UW 4 FS
Functions:
Shrinkage Reducing Agent, Binder & Resin
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Polyvinyl Acetates (PVA)
Product Type:
Solventborne Adhesive
VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.
Wacker Chemie AG
VINNAPAS® C 341
Functions:
Rheology Modifier
VINNAPAS® C 341 is a solid, colorless to pale yellowish copolymer of vinyl acetate and crotonic acid. Typical applications for VINNAPAS® C 341 include composites and resin modification for composites, such as fiber-reinforced plastics. VINNAPAS® C 341 is supplied in 25-kg paper bags.
Wacker Chemie AG
VINNEX® 8802
Functions:
Shrinkage Reducing Agent
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Polyvinyl Acetates (PVA)
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Succinate (PBS), Vinyl Esters, Polyhydroxyalkanoates (PHA)
Processing Methods:
Injection Molding
VINNEX® 8802 is an innovative compound made from a vinyl acetate/vinyl laurate copolymer and polyvinyl acetate. This thermoplastic resin is colorless, tasteless, and odorless, and it can be easily melted in its dosable form. It is specifically recommended as a highly efficient low profile additive (LPA) that offers a significantly improved LPA effect in vinyl ester resins, even at lower curing temperatures compared to conventional LPA grades. Furthermore, VINNEX® 8802 demonstrates excellent compatibility with biopolyesters like PLA.
Wacker Chemie AG
CRA® 21
Functions:
Release Agent
Labeling Claims:
TSE-free, BSE-free, Animal Products-free
Features:
Good Mold Release, Highly Efficient, Good Release Properties, High Efficiency
CRA® 21 is an exceptional controlled release additive specifically formulated for adjusting the release force in solvent-based DEHESIVE® systems. As a solvent-based additive, it delivers high release levels, making it highly efficient in its intended application. Additionally, CRA® 21 exhibits good release stability, ensuring consistent performance over time.
Wacker Chemie AG
VINNAPAS® LL 8251
Functions:
Shrinkage Reducing Agent
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Processing Methods:
Pultrusion, Resin Transfer Molding (RTM)
VINNAPAS® LL 8251 is a solid copolymer of vinyl acetate and crotonic acid, ranging in color from colorless to pale yellowish. It finds typical applications in fiber reinforced plastics and resin modification for composites. The product is available in the form of solid flakes.
Wacker Chemie AG
CRA® 42
Functions:
Release Agent
Labeling Claims:
Solvent-free, TSE-free, BSE-free, Animal Products-free
Features:
Good Mold Release, Highly Efficient, Fast Curing, Good Release Properties, Fast Cure, High Efficiency
CRA® 42 is an exceptionally efficient controlled-release additive specifically designed to adjust the release force in solvent-free DEHESIVE® systems. It offers remarkable performance in achieving high release levels. Furthermore, CRA® 42 provides an extremely stable release, ensuring consistent and reliable results. It also boasts fast-curing properties.
Wacker Chemie AG
SILRES® H60 A/B
Polymer Name:
Thermoset Silicone (Si)
Chemical Family:
Silicones
Processing Methods:
Resin Transfer Molding (RTM)
SILRES® H60 A/B is a liquid, solvent-free, two-part phenyl silicone resin formulation. The product is a modification of the well-established SILRES® H62 C and is thus ideal for impregnating the electrical coils of motors. Besides, SILRES® H60 A/B can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. Fully cured SILRES® H60 A/B has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.
Wacker Chemie AG
SILRES® H 44
Functions:
Resins, Binders & Matrix Materials
Chemical Family:
Silicones
SILRES® H 44 is a powdered, condensation-curing phenyl silicone resin with excellent solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Due to its compatibility with organic resins, SILRES® H 44 can also be used to modify or partly replace phenolic resins in the respective compounds. Compared to other silicone resins, SILRES® H 44 cures relatively quickly at elevated temperatures. It is therefore particularly suitable for fully automated production lines.
Wacker Chemie AG
VINNAPAS® C 501
Functions:
Shrinkage Reducing Agent
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Compatible Polymers & Resins:
Unsaturated Polyester (UPE)
Processing Methods:
Pultrusion, Resin Transfer Molding (RTM)
VINNAPAS® C 501 is a solid, colorless to pale yellowish copolymer of vinyl acetate and crotonic acid. Typical applications for VINNAPAS® C 501 include antishrinkage additives, composites, and resin modification for composites, such as fiber-reinforced plastics. VINNAPAS® C 501 is supplied in 25-kg paper bags.
Wacker Chemie AG
CRA® eco 17
Functions:
Release Agent
Labeling Claims:
Solvent-free, TSE-free, From Renewable Resources, BSE-free, Animal Products-free
Features:
Good Mold Release, Highly Efficient, Renewable Resource Content, Fast Curing, Good Release Properties, Fast Cure, High Efficiency
CRA® eco 17 is an extremely efficient controlled release additive used for adjusting the release force of solvent-free DEHESIVE® systems. It is derived from renewable raw materials and complies with the "Standard REDcert²." CRA® eco 17 offers the highest release values among all CRA® modifiers.
Wacker Chemie AG
GENIOPLAST® PP 20A08
Chemical Family:
Silicones
Functions:
Melt Flow Agent, Rheology Modifier, Processing Aid
Compatible Polymers & Resins:
Thermoplastic Polyolefins (TPO), Polyolefins, Polypropylenes (PP)
Processing Methods:
Extrusion
Carrier:
Polypropylenes (PP), Resin-based
GENIOPLAST® PP 20A08 is a pelletized formulation consisting of 20% functional silicone dispersed in polypropylene. It has been specifically developed as a compounding additive for unfilled and filled thermoplastic polyolefin compounds. This product is odorless. When used within the recommended levels (0.5 - 2%), GENIOPLAST® PP 20A08 does not have a negative impact on the thermo-mechanical properties of the compounds it is added to. Additionally, due to its specific effect, the processing temperature of the polyolefin compound can be slightly lowered.
Wacker Chemie AG
VINNEX® 8803
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Succinate (PBS), Polyhydroxyalkanoates (PHA)
Functions:
Shrinkage Reducing Agent
Processing Methods:
Injection Molding
Chemical Family:
Polyvinyl Acetates (PVA), Vinyls, Vinylics & Vinyl Derivatives
VINNEX® 8803 is an innovative compound made from a vinyl acetate/vinyl laurate copolymer and polyvinyl acetate. It is a colorless, tasteless, and odorless thermoplastic resin that comes in a dosable form and can be easily melted. This product is specifically recommended as a highly efficient, low-profile additive for fiber-reinforced composites and polymer concrete-type applications. It also demonstrates excellent compatibility with biopolyesters such as PLA.
Wacker Chemie AG
CRA® 23
Functions:
Release Agent
Features:
Good Mold Release, Good Release Properties, Highly Efficient, High Efficiency
CRA® 23 is a highly efficient controlled-release additive designed to adjust the release force in solvent-based DEHESIVE® systems. As a solvent-based controlled release agent, it provides exceptional release levels. Moreover, CRA® 23 exhibits good release stability, ensuring consistent performance over time. It also boasts an excellent bathing life.
Wacker Chemie AG
VINNAPAS® UW 2 FS
Functions:
Shrinkage Reducing Agent, Binder & Resin
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Polyvinyl Acetates (PVA)
Product Type:
Solventborne Adhesive
VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.
Wacker Chemie AG
GENIOSIL® CS 2
Functions:
Impact Modifier, Coupling Agent
Chemical Family:
Silanes
Compatible Polymers & Resins:
Unsaturated Polyester (UPE)
GENIOSIL® CS 2 is an unsaturated alkoxysilane. It is a clear, colorless liquid with a characteristic aromatic odor. In the presence of moisture, it hydrolyzes and liberates alcohol to form silanols that can react with themselves to form siloxanes. As it possesses both silyl and unsaturated organic groups, GENIOSIL® CS 2 acts as a molecular bridge between organic and inorganic substrates.
Harcros Chemicals Inc.
T-Mulz® Z 900
Chemical Family:
Amines, Polyamines
Functions:
Curing Agent
Features:
Excellent Solvent Resistance, Low Viscosity, Solvent Resistance
T-Mulz® Z 900 is a modified aliphatic amine and a clear to light yellow-colored, low-viscosity epoxy curing additive. The incorporation of T-Mulz® Z 900 into epoxy systems allows for less critical mix ratios and excellent solvent resistance. It can be used across a wide range of applications, including tooling compounds, laminates, automotive body patching compounds, and metal and plastic adhesives.
Envalior
Akulon® K224-TG9
Polymer Name:
Polyamide 6 (PA 6)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
Akulon® K224-TG9 is a polyamide 6 (PA 6) resin, a member of the polyamide chemical family. It can be reinforced with glass fibers and incorporate glass fiber fillers during its processing, primarily utilizing the injection molding method. This product is used in various markets, including automotive, transportation, and consumer goods, where it finds a wide range of applications.
Envalior
Akulon® Diablo HDT2504BM (K-X08203)
Polymer Name:
Polyamide 6/66 (PA 6/66)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Additives Included:
Heat Stabilizer
Fillers Included:
Glass Fiber
Processing Methods:
Blow Molding
Akulon® Diablo HDT2504BM (K-X08203) is a polyamide 6/66 (PA 6/66) resin known for its heat stabilization and lightweight nature that is prominently utilized in the automotive and transportation markets. This versatile material is applied in automotive applications for exterior and body components, as well as interior elements such as door panels, flooring, and wheel housing parts.
Envalior
EcoPaXX® Q-HXG6
Polymer Name:
Polyamide 410 (PA 410)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Additives Included:
Heat Stabilizer
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
EcoPaXX® Q-HXG6 is a long aliphatic polyamide with good thermal properties and good flow for use in high-precision insulating profiles. It belongs to the family of long-chain polyamides, which offer exceptional performance in the most demanding environments, including excellent chemical resistance, low moisture absorption, a very high melting point (highest among bio-plastics), and a high crystallization rate. This grade is processed using injection molding and features special heat stabilization and 30% glass reinforcement.
Show
36
of 6,383 results
Go to page
1
2
3
4
5
6
7
8
9
10