Products in Elastomers: Accelerator

Rongcheng Chemical General Factory Accelerator ETU(Na-22) is a white granular as a appearance.

Mercure TMTM is thiurams accelerators which is used mainly in rubber industry.

NOBS(MBS) is a Rubber accelerator.

Rayton Chemicals TBZTD is a Pale yellow powder.

Banac TMTD has chemical composition of Tetramethyl thiuram disulfide and used as an accelerator.

NOBS(NO) is Secondary Sulfonamide. It is light yellow or orange yellow color pellet with a little amine taste, non-poisonous, soluble in benzene, acetone,chloroform; insoluble in water, dilute acid and dilute alkali. It will gradually resolve when it is heated over 60°C.

Robinson Brothers AS100 24604 has a chemical structure which is completely free from nitrogen, phosphorous and metallic elements.

A delayed action accelerator of vulcanization for natural and synthetic rubber. The speed of vulcanization is similar to CBS’s, but it’s delaying is larger than the CBS. There is little pollution and the color is changeless. It can be used as rubber products of tire.

Puyang Changyu Petroleum Resins ZMBT(MZ) MZ-15 Powder is mainly used together with ZDMC and ZDEC as primary accelerator for latex; can achieve higher modulus of valcanized latex. In addition, it can achieve good compressive deformation resistance without additional curing time. ZMBT will not affect the stability of latex.

Kemai Chemical ACCELERATOR NS (TBBS) is used for all kinds of tubber products. Especially used for manufacturing radial tire. It has features of slack effective and high-speed.

Robinson Brothers SAA30 16830 is a newly developed, ultra fast, environmentally ‘safer’ accelerator. Designed to overcome concerns regarding both the N-nitrosamine and Type IV allergies both in terms of production and application environments.

Shandong Stair Chemical & Technology Rubber accelerator MZ is used in the dulling of coating.

Rokem DPG is diphenyl guanidine, a grayish-white powder or granular accelerator.

A universal rubber accelerator, mainly is used in tires, rubber shoes and other rubber articles. It is not used in rubber bags for food because of its bitterness. MBT is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105, 176.300 and under BgVV XXI, Categories 1-4 and “Sonderkategorie”.

Nurcacit ZDTP PDR is a fast curing secondary accelerator for NR and EPDM. It is mainly used as an accelerator in non-blooming., relative low cost, fast curing systems for EPDM when used in combination with MBTS or sulfenamides in NR compounds. ZDTP dramatically improves reversion resistance. Because of its non-amine based structure, ZDTP can be used as a component in non-N-nitrosamine generation cure systems. ZDTP is non-discoloring and non-staining. ZDTP is regulated for use in articles in contact with food as specified under Bg VV XXI, category 4, ZDTP is not regulated for use in FDA food contact applicants.

Mercure ZDC is dithiocarbamates accelerators which is used mainly in rubber industry.

Banac MBT has chemical composition of 2-Mercaptobenzothiazole and used as an accelerator.

Natrochem Butyl Tuads DLC-A is a dry liquid concentrate, sulfur donor accelerator for soluble cure systems. Used in conjunction with a Sulfenamide, Amyl Dithiocarbamate and Octoate Z in Isoprene Rubbers (natural and synthetic). Used in conjunction with Amyl Leadate in black filled Ethylene-propylene-diene Rubbers.

Sulfenax® TBBS is a primary rapid sulfonamide accelerator of rubbers vulcanisation, suitable, in particular, for tires production. Product of creamy to gray color, characteristic smell, non-hygroscopic.

Richon® Rubber Accelerator DCBS Powder is used in Rubber auxiliary agents. DCBS is a sulfenamide accelerator with excellent anti-scorching property and delayed onset of cure. It is compatible with natural and synthetic rubbers, suitable for radial ply tire, rubber belts and shock absorber, etc. Particularly it produces good adhesion to metal..

Henan Connect Rubber Chemical ZDBC (ZBDC,BZ) can be used as primary or secondary accelerator for NR, IR, SBR, NBR, IIR and EPDM.

Rongcheng Chemical General Factory Accelerator DCBS(DZ) has a light yellow or light pink granular as a appearance.

PERGAQUICK A100 is N,N-Dimethyl-p-toluidine 98.5%, Liquid.PERGAQUICK A100 is used as an accelerator for curing of unsaturated polyester and PMMA resins at ambient temperature in combination with Dibenzoyl peroxide (PEROXAN BP-types).

A fast curing accelerator for natural, synthetic rubber and latex, it can be used as accelerators of butyl rubber, acrylonitrile-butadiene rubber and EPDM rubber, non-toxic, inodorous, stainless and changeless in colors on products, suitable for coated fabric,. It had wonderful effect in the products of EPDM rubber and butyl rubber. ZDMC is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 178.3120 and under BgVV XXI, Categories 1-4 and “Sonderkategorie”.

Robinson Brothers ZDBC 22525 can be widely used in active secondary accelerator for dry rubber.

Rayton Chemicals TDEC is Orange yellow powder.

IIntercure® 2 is produced by IB Chem S.r.l. - INTERBUSINESS Group, is a phosphonium salt used as accelerator for Fluoroelastomers (FKM); adhesion promoter of Fluoroelastomers (FKM) to a variety of other elastomers; curative for Polyacrylate polymers (ACM) for which it increases the compound shelf life, improves compression set, and reduces the mold fouling.

Puyang Changyu Petroleum Resins NDBC Powder is used as accelerator for most sulfur-cured elastomers, can provide ozone resistance in dynamic application, as excellent anti-oxidant in usual application. NDBC can protect CR, CSM, CO, ECO from oxygen and also used for EPDM and CSM vulcanized rubbers and colored CR products.

Rayton Chemicals ZDBC (BZ) is a white powder.

Robinson Brothers Robac SRM102 PM60 16832 is a replacement for ETU in polychloroprene rubber.

Vulcanizing Agent DTDM is used as the rubber accelerator and vulcanized agent of natural rubber, synthetic rubber. Under the curing temperature, it can release activing sulfur, effective sulfur content is about 27%. It has operating safety, curing speed is slow when it is used alone. The curing speed can be arised when used with thiazole, thiuram, thiocarbamate. There are many advantages, such as, no-spray, no-pollution, no-discolor, easy to disperse. It is especially suitable to butadiene rubber. Mainly it is used to manufacture tires, inner tube, rubber beltl, heat-resistance rubber products, etc.. DTDM is regulated for use in articles in contact with food as specified under FDA 21 CFR177.2600, 175.105 and under BgVV XXI, Category 4.

Richon® Rubber accelerator D Powder is used in Rubber auxiliary agents. It is soluble in chloroform, toluene benzene and ethanol. It is used as a secondary accelerator with thiazoles and sulphenamides in NR and SBR compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. DPG can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process..

Nurcacit ZDBC PDR is a primary or secondary accelerator in NR, SBR. IIR or EPDM. ZDMC is used in both natural and synthetic latex for faster curing than with ZDEC or ZDMC. Furthermore, it is an antioxidant in rubber-based adhesive systems.

Rayton Chemicals CBS is a Grayish-white granular with a little odor, nontoxic.

Nurcacit MBTS PDR gives flat, moderately fast cures in nature and synthetic rubber. Also used in a wide range of general purpose rubbers. Non-staining/non-discoloring in “white” stock; act as a plasticizer/retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Exhibits better scorch safety than MBT.

As a kind of super accelerator used to natural rubber, styrene-butadiene rubber. Commonly, using with some other kind of accelerators such as benzothiazole, sulfenamide. A fast velocity at vulcanizing temperature can be obtained, and intensile can be increased. Suitable for making inner tube of tires, soft tube, isolating layer of wire and cable, etc.. Don’t use for manufacturing the products contacting with foods. TDEC is regulated for use in articles in contact with food as specified under BgVV XXI, Category 4.