Products in Elastomers: Ethylene Propylene Diene Terpolymer (EPDM)

EPDM Peroxide 80 WRAS G is a Peroxide Cured EPDM elastomer, with good physical properties & meets the requirements of BS 6920-1:2000 and BS EN681-1 WA 80.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

EPDM 80 B WRAS R1 [E6392] is an EPDM elastomer with good physical properties & meets the requirements of BS 6920-1:2000 and BS EN681-1 WA 70.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

PEXIDAN® SX505NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493 or CM497, in the ratio 95:5. The SX505NT:CM493 or SX505NT:CM497 systems have passed type-tests for use up to and including 36 kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

EPDM 50 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

PEXIDAN® SX554 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493, in the ratio 95:5, or CM497, in the ratio between 90:10 and 93:7.CM493 is a stronger catalyst suitable for wall thicknesses > 1.5mm and CM497 is a weaker catalyst suitable for small conductor sizes, such as 1 to 4 mm2. The system SX554:CM493 or SX554:CM497, has been approved for use at 1kV and has found uses up to 10kV, it is highly flexible and enables the production of soft rubber cables without the use of continuous vulcanization equipment. Crosslinking is obtained by exposure to moist or hot water immersion only.

EPDM 80 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

DLR Elastomer Engineering Ltd EN 45545-2 is a black fire resistant Ethylene Propylene Diene Rubber (EPDM).EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

EPDM 70 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone. EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

EPDM 60 B WRAS G1 is a polymer made from ethylene, propylene, and a small number of diene monomers. These diene monomers provide cross-link sites that allow EPDM to be vulcanized. A small number of diene monomers form unsaturated groups pendant from the main saturated chain. These groups facilitate cross-linking reactions that do not affect the integrity of the polymer backbone.EPDM rubber has excellent heat, ozone and chemical resistance propertiesEPDM also has good physical properties and is resistant to polar fluidsLow-temperature properties require the polymer to be amorphous and low on ethylene (speak to the expert)Good electrical properties require high ethylene to facilitate high doses of inert mineral fillers to give good electrical resistanceEPDM rubber can be compounded to provide excellent electrical resistance

EPDM 70 B WRAS R1 [E6029] is an EPDM elastomer with good physical properties & meets the requirements of BS 6920-1:2000 and BS EN681-1 WA 70.

Climarub 0.7 is our new rubber material developed to reduce the environmental impact. It can replace traditional EPDM rubber resulting in considerably lower CO₂ emission. Technically, Climarub performs just as well as traditional EPDM rubber.

Cooper Standard ISG A-KX 55-15 is a salmon (RAL 3022) color EPDM sheeting. It has properties like electrical insulation blankets according to DIN EN 61112 A, Z,.

KEP® 020P produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

Sulphur cured, off-white Ethylene Propylene Terpolymer, 55-65 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA) to be in accordance with Code of Federal Regulations Title (CFR21), Section 177.2600. Extraction tested in distilled water.Suitable for repeated use with dry and aqueous foodstuffs intended for human consumption. Not suitable for use with fatty foodstuffs.

Unirubber EPDM Virgin Colored Granules is depending on the grain size for sport fields, small pitches, running trucks, tennis courts, playgrounds, swimming pools, terraces, indoor and outdoor flooring systems.

Dynacast Industrial Products Ethylene-Propylene Diene Monomer - EPDM is excellent for water and steam applications. EPDM is similar to Styrene Butadiene Rubber (SBR) but has improved resistance to atmospheric aging, heat oxidization and ozone up to about 150C. Ethylene Propylene Diene Monomer has excellent electrical properties and good chemical resistance.

POLIGOM is available in a wide range of SHORE HARDNESS with feature of flame retardant thermoplastic, halogen-free and exceptional flexibility. The product is available with high level of tensile strength, excellent levels of tear strength and free plasticizers (XEPR/XHEPR), and is also characterized by a particularly low value of Specific Gravity.

An Excellent Polymer for Heat Resistant Thermoset Applications and TPO Products

POLIGOM is available in a wide range of SHORE HARDNESS with feature of flame retardant thermoplastic, halogen-free and exceptional flexibility. The product is available with high level of tensile strength, excellent levels of tear strength and free plasticizers (XEPR/XHEPR), and is also characterized by a particularly low value of Specific Gravity.

Polymer-Technik Elbe EPDM - Elastomer Guideline TWK7534 has excellent ozone, aging and weather resistance which also has low pressure deformation residue even at high temperatures, very good resistance to hot water, hot steam, acids, alkalis and hydraulic fluids based on glycol water.

Polymer-Technik Elbe EPDM - Peroxide TWK7528 has excellent ozone, aging and weather resistance which also has low pressure deformation residue even at high temperatures, very good resistance to hot water, hot steam, acids, alkalis and hydraulic fluids based on glycol water.

D10090 is EPDM based compound that is medium hard with dimension stability.

RubberGard™ MAX (Reinforced) EPDM Membrane is an internally reinforced, cured single-ply roofing membrane that features a 9 x 9, 1,000 denier polyester weft inserted reinforcing scrim for increased puncture resistance. It is available in 0.045′′ (1.1 mm), 0.060′′ (1.5 mm) and 0.075′′ (1.9 mm) thicknesses. Designed with fire retardants, Firestone RubberGard MAX EPDM Membrane can meet qualification for UL Class A for slopes up to 3′′ (76.2 mm), depending on the roofing assembly.

RubberGard™ MAX PT Membrane features our RubberGard Max (reinforced) EPDM membrane with factory laminated 6" (152 mm) or 3′′ (76 mm) wide QuickSeamTM tape extending continuously along one 100' (30.5 m) edge of the panel. The pre-applied tape extends slightly beyond the edge of the MAX PT membrane to form a selvage edge.

Coruba Coru146 Black EPDM Roofing Membrane Sheeting generally used for modern day roofing. CORUSEAL EPDM Roofing Membrane is highly flexible, whilst still working well at temperatures of between -40 degrees C, upto 150 degrees C – plus CORUSEAL EPDM Roofing Membranehas has elongation properties of 300% at break. This is a cheap and effective way of protecting your roof – with little or no ongoing maintenance needed.

POLIGOM is available in a wide range of SHORE HARDNESS with feature of flame retardant thermoplastic, halogen-free and exceptional flexibility. The product is available with high level of tensile strength, excellent levels of tear strength and free plasticizers (XEPR/XHEPR), and is also characterized by a particularly low value of Specific Gravity.

Polymer-Technik Elbe EPDM - Elastomer Guideline TWK5813 has excellent ozone, aging and weather resistance which also has low pressure deformation residue even at high temperatures, very good resistance to hot water, hot steam, acids, alkalis and hydraulic fluids based on glycol water.

G&E 565 is produced from feedstocks carefully selected for uniform viscosity, ethylene propylene ratio and 3rd monomer. The feedstocks are chosen to produce a blended EPDM Polymer which has a high ethylene content, medium mooney and high diene. G&E Blended EPDM 565 can be blended with prime EPDM polymers to reduce compound costs in extruded, calendered and molded applications.

ETHYLENE PROPYLENE RUBBER (EPR/EPDM) 505A is an amorphous rubber with low molecular weight and high ENB content, 505A is able to be applied for various types of product by taking advantage of its good flow and high cure rate, By blending with diene type rubbers such as a natural rubber, 505A plays significant roles to improve their ozone resistance, 505A is also suitable for foam applications made by continuous curing and it produces various sponge products with low density.

An Excellent Polymer for Hose and Extruded ProfilesUnique Features Fast Curing Excellent extrusion properties: low die swell, high extrusion rate High green strength, excellent shape stability Friable bale provides excellent dispersion Highly extendable Good low temperature properties Applications Extruded Profiles Hose Molded Products

D50070 is a EPDM based compound that has chemical resistant,heat resistant, weatherable and UV resistant

Cooper Standard ISG A-KT 70-00 is a black color EPDM – sheeting for drinking water. It is peroxide cured.

Sulphur cured, white Ethylene Propylene Terpolymer, 75-85 °IRHD. Terpolymer of ethylene, propylene and diene monomers. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA) to be in accordance with Code of Federal Regulations Title (CFR21), Section 177.2600.Material formulated for repeated use with aqueous foodstuffs intended for human consumption.

General purpose, peroxide cured, Ethylene Propylene Terpolymer, 70-75 °IRHD. Terpolymer of ethylene, propylene and diene monomers. To meet ASTM D2000/SAE J200 line call-out M5CA710, A25, B35, C32, EA14, F17.Excellent water and steam resistance with good compression set properties. Better heat and chemical resistance than sulfur cured EPDM. Not mineral oil resistant.

EPX 4460 is a Peroxide Cured Ethyl Propylene diene monomer.

Seals Eastern Compound 7189 is 53-duro EPDM.