Products in Elastomers: Polyurethane Thermoset Elastomer (unspecified)

RS-6285 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

RS-3650 is a high strength, flexible urethane that is well suited for a wide variety of applications. This material is a shore A-70 hardness urethane that offers high toughness, elongation and flame resistance. This material meets UL 94/V-0 requirements.

PU Resin For Glove Production

RS-6570 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation, and abrasion resistance. This material is easily pigmented to any color required.

PU Resin For Glove Production

RS-6300 is a medical grade high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance. This material will meet the requirements of medical grade class VI specifications.

DLR Elastomer Engineering Ltd Sorbothane - Durometer 50 (Shore 00) is one of our polyurethane products. Sorbothane provides good vibration isolation and vibration damping characteristics, making them a very effective acoustic damper. This material can also be bonded to other materials such as PTFE & metals.Sorbothane has a superior damping coefficient, over a very wide temperature range, compared to any other polymerSorbothane’s operating temperature range is -20° to +160° Fahrenheit (-29° to 72° Celsius)Unlike fluid-based shock absorbers or foam products, Sorbothane absorbs shocks efficiently for millions of cyclesSorbothane eliminates the need for metal springs to return the system to its equilibrium position after absorbing a shock

DLR Elastomer Engineering Ltd Sorbothane - Durometer 30 (Shore 00) is one of our polyurethane products. Sorbothane provides good vibration isolation and vibration damping characteristics, making them a very effective acoustic damper. This material can also be bonded to other materials such as PTFE & metals.orbothane is a proprietary, viscoelastic polymer. Sorbothane is a thermoset, polyether-based, polyurethane material. In addition to being viscoelastic, Sorbothane also has a very high damping coefficient. Sorbothane combines shock absorption, good memory, vibration isolation, and vibration damping characteristics. While many materials exhibit one of these characteristics, Sorbothane combines all of them in a stable material with a long fatigue life. Sorbothane has a low creep rate compared to other polymers (rubber, neoprene, silicone, etc.)Sorbothane has a superior damping coefficient, over a very wide temperature range, compared to any other polymerSorbothane’s operating temperature range is -20° to +160° Fahrenheit (-29° to 72° Celsius)Unlike fluid-based shock absorbers or foam products, Sorbothane absorbs shocks efficiently for millions of cyclesSorbothane eliminates the need for metal springs to return the system to its equilibrium position after absorbing a shock

RS-6110 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

DLR Elastomer Engineering Ltd Sorbothane - Durometer 70 (Shore 00) is one of our polyurethane products. Sorbothane provides good vibration isolation and vibration damping characteristics, making them a very effective acoustic damper. This material can also be bonded to other materials such as PTFE & metals.Sorbothane has a superior damping coefficient, over a very wide temperature range, compared to any other polymerSorbothane’s operating temperature range is -20° to +160° Fahrenheit (-29° to 72° Celsius)Unlike fluid-based shock absorbers or foam products, Sorbothane absorbs shocks efficiently for millions of cyclesSorbothane eliminates the need for metal springs to return the system to its equilibrium position after absorbing a shock

RS-6294 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

PU Resin For Glove Production

RS-6540 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation, abrasion resistance. This material is easily pigmented to any color required.

RS-6290 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

RS-6560 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation, and abrasion resistance. This material is easily pigmented to any color required.

Poly 74-30 HT Polyurethane Rubbers consist of two parts (A and B), which, after mixing, cure at room temperature to flexible, high-strength, mold rubbers. Poly 74-30 HT Rubbers make durable, easy-releasing molds for casting plasters and waxes without release agents. When Poly 74-30 HT molds are properly prepared, they are also excellent for casting concrete and various resins, such as epoxy, polyester, polyurethane and acrylic.

Poolkemie POLIMOLD NT 25 is used in Polyurethane rubber for mold making.and it's Complex mold have applications in Serial reproduction of rubber Technical Articles, cement, plaster medium sized products.

Silpak RU-280 is a two-component, semi-flexible urethane elastomer that is easy to process. Applications include automotive, tooling, architectural flexible moldings, prototype, Special FX, coatings and any application where rapid cure, high resiliency, firm rubber part is required. Parts can be easily stained with either oil or water based paints.

The MU-620B's functions are flexible and low temperature curing.

BC 8660E is a multi-purpose elastomer that can perform many functions. Special product characteristics are: excellent use for molds for casting of concrete and plaster, resists moisture absorption, does not contain MOCA, MDA, TDI or MDI, very easy to use, cures at room temperature.

Poly 75-80 Liquid Rubbers consist of two parts (A and B), which, after mixing, cure at room temperature to flexible rubber. Molds made with Poly 75-80 products are excellent for casting concrete, plaster and wax. In addition, Poly 75-80 molds can be used to cast various resins and foams when properly prepared. Poly 75-80 Liquid Rubbers are formulated for good economy with high performance and durability.

Brandonite® 1310-70A contains features such as Excellent lubricity and run-dry capacity for 15 minutes.

HAPFLEX 700 & 800 products are a series of low hazard, colorless, high strength, elastomers available in Shore hardnesses from 65A to 72D. HAPFLEX 700 & 800 products exhibit high tensile strength, high tear strength, and excellent elongation. All HAPFLEX 700 & 800 products cure at room temperature and can be accelerated with heat.Another key attribute of the 700 & 800 SERIES is that the base color of all components is colorless. For user convenience, HAPCO has designed this series in 2 speeds so the user can "customize" production rates and cure times. The fast and regular versions can be blended to user customize the gel time and cure time.HAPFLEX 700 & 800 SERIES can be used for mechanical, electrical, and mechanical/electrical applications. In addition, HAPFLEX 700 & 800 products show superior water immersion properties and superior adhesion when used in combination with Hapco's one part PRIMER 200.

BC 8760 is a two-component urethane casting compound that is specifically formulated for high abrasion and impact resistance. It is recommended for use for the production casting of highly wear-resistant parts and linings. This product is safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, MDA, or MOCA. BC 8760 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit. The low viscosity and simple mix ratio assure uniform and easy mixing.

Poolkemie POLIMOLD NT 40 is used in Polyurethane rubber for mold making and it's Complex mold have applcations in Serial reproduction of rubber Technical Articles, cement, plaster medium - large sized products.

The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold.The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes.In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers.Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications.Available in Flame Retardant

Silpak RU-365 is a liquid, two-component, 100% solid Urethane RTV Elastomer that provides firm rubber part with excellent tear strength and abrasion resistance. Its simple 1 to 1 mix ratio and low viscosity allows for easy processing. This firm, yet flexible, urethane RTV is used for texture and concrete stamp pads, firm rubber molds and parts, concrete form liners, prototype rubber parts or any application where a firm rubber part is required.

The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold.The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes.In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers.Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications.Available in Flame Retardant

Poly 74-30 Clear Polyurethane Rubbers consist of two parts (A and B), which, after mixing, cure at room temperature to flexible, high-strength, mold rubbers. Poly 74-30 Clear Rubbers make durable, easy-releasing molds for casting plasters and waxes without release agents. When Poly 74-30 Clear molds are properly prepared, they are also excellent for casting concrete and various resins, such as epoxy, polyester, polyurethane and acrylic.

Poly 74-44 Polyurethane Rubbers consist of two parts (A and B), which, after mixing, cure at room temperature to flexible, high-strength, mold rubbers. Poly 74-44 Rubbers make durable, easy-releasing molds for casting plasters and waxes without release agents. When Poly 74-44 molds are properly prepared, they are also excellent for casting concrete and various resins, such as epoxy, polyester, polyurethane and acrylic.

BC 8675E is a multi-purpose elastomer that can perform many functions. Typical product features are: easy to use, cures at room temperature, resists moisture absorption, excellent in use for molds for casting of concrete and plaster, does not contain MOCA, MDA, TDI or MDI. Product uses include: mold fabrication, shock absorbent pads and liners, excellent as an adhesive for high strength and resilient bonds, electrical potting and cable sealing applications, various types of urethane rubber parts.

PT Flex 70 are two-component, fast-setting polyurethane rubbers that cure at room temperature (RTV). Available in a variety of hardnesses, these products are excellent for prototyping and model making applications and for the casting of production parts, props, tools, and more.

Eraspray ESP880 is a two component, spray-in-place, solvent free, and 100% solids polyurethane elastomer system and contains a fire-retardant.

Poly 74-29 Polyurethane Rubbers consist of two parts (A and B), which, after mixing, cure at room temperature to flexible, high-strength, mold rubbers. Poly 74-29 Rubbers make durable, easy-releasing molds for casting plasters and waxes without release agents. When Poly 74-29 molds are properly prepared, they are also excellent for casting concrete and various resins, such as epoxy, polyester, polyurethane and acrylic.

BJB’s MD Series of semi rigid, medium work time urethane elastomers exhibit great flexibility and excellent durability. These tough, abrasion resistant systems easily process at room temperature.The MD Series is perfect for larger or more complex parts and offers superior performance in many applications such as rollers, foundry tooling and high impact semi rigid parts. For faster work times consider BJB’s FD Series of elastomers.

The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold.The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes.In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers.Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications.Available in Flame Retardant