Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Specialty Elastomers
Silicone Elastomers
Products in Silicone Elastomers
821 Products found in Silicone Elastomers
Filters
Suppliers
Applications
Polymer Name
End Uses
Mechanical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® M 4503
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Good Flow, Room Temperature Vulcanizing, Low Hardness, Good Mechanical Properties, Excellent Flowability, Excellent Elasticity, Pourable, Long Potlife
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® M 4503 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It possesses several key features, including good flow and high resistance to casting resins, particularly polyesters. The main application of ELASTOSIL® M 4503 is in making cost-effective molds, particularly well-suited for PE resins.
Wacker Chemie AG
ELASTOSIL® LR 3004/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Heat Stabilized, Food Contact Acceptable
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® LR 3004/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
SILPURAN® 6610/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Medical Devices, Slotted Membranes, Valves, Medical/Healthcare Applications
Features:
Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Radiation Sterilizable, E-Beam Sterilizable, Low VOC
Tear Strength:
20.0 - 20.0 kN/m
SILPURAN® 6610/60 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® M 4511
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making
Features:
Excellent Flowability, Pourable, High Elongation, Long Potlife, High Flexibility, Good Flow, Room Temperature Vulcanizing, High Strength, Chemical Resistant, High Performance, Low Hardness, Good Tear Strength, Self Deaeration
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® M 4511 is a room-temperature-curing silicone rubber (RTV-2) that is pourable and condensation-curing. It consists of two components and vulcanizes at room temperature. This grade exhibits outstanding chemical resistance to attack by polyester and polyurethane resins, resulting in a significantly extended mold life. The main application of ELASTOSIL® M 4511 is in making cost-effective molds, particularly well-suited for casting PE (polyethylene) and PU (polyurethane) resins.
Wacker Chemie AG
ELASTOSIL® LR 3066/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
32.0 - 32.0 kN/m
ELASTOSIL® LR 3066/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
POWERSIL® 460 MH
Polymer Name:
Silicone Elastomer
End Uses:
Cables, Cable Accessories, Wires
Features:
Electrically Conductive, High Consistency
Tear Strength:
35.0 - 35.0 kN/m
POWERSIL® 460 MH is a ready-to-use electrically conductive silicone rubber grade specifically designed for compression molding. It already incorporates curing agent C1. This material is electrically conductive and is suitable for applications such as stress cones for cable accessories and cold shrink accessories.
Wacker Chemie AG
ELASTOSIL® LR 3844/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
ELASTOSIL® LR 3065/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Batteries
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3065/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® LR 3004/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Heat Stabilized, Food Contact Acceptable
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3004/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/80
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Battery Cable, Plugs, Ignition Cables, Wires, Cables
Features:
Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® RT 601 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
Potting Compound, 2K (2 component) Sealant, 2K (2 component) Coating, Encapsulant
Cure Method:
Chemical Cure, Air Dry
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber. It has a two-part formulation with a 9:1 mixing ratio. This product features low viscosity, medium cured hardness, and excellent tensile strength. The vulcanizate obtained is crystal clear and highly transparent. It is suitable for various applications such as all-round potting compound and the manufacture of molded articles through casting.
Wacker Chemie AG
ELASTOSIL® LR 3003/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® LR 3003/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3071/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Good Mechanical Properties
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® LR 3071/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3071 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3842/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:
38.0 - 38.0 kN/m
ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
ELASTOSIL® LR 3070/30 US A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
ELASTOSIL® LR 3070/30 US A/B is a primerless, self-bonding liquid silicone rubber (LSR) grade that adheres to various plastic substrates, e.g. PA, PBT, and metals, but not to the mold surface. The bonding is improved by oven-curing for 1 hour at 100°C or 24 hours at room temperature.
Wacker Chemie AG
ELASTOSIL® R Plus 4366/60
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Heat Stabilized, Food Contact Acceptable, Fast Curing, Low Coefficient of Friction, Good Mechanical Properties, High Consistency, Excellent Transparency Properties
Tear Strength:
41.0 - 41.0 kN/m
ELASTOSIL® R Plus 4366/60 is a high consistency silicone rubber specifically designed for the production of extruded articles. It undergoes addition curing as a two-component system. The cured articles demonstrate excellent transparency and exhibit good to very good mechanical properties. In comparison to ELASTOSIL® R plus 4305/60, post-cured parts made from ELASTOSIL® R Plus 4366/60 experience a reduction in coefficient of friction ranging from 50% to 70%.
Wacker Chemie AG
ELASTOSIL® R Plus 4000/50
Polymer Name:
Silicone Elastomer
End Uses:
Diving Masks
Features:
Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
49.0 - 49.0 kN/m
ELASTOSIL® R Plus 4000/50 is a two-component, high consistency silicone rubber specifically designed for the manufacture of molded articles. Once cured, these articles demonstrate remarkable tear resistance and exhibit high levels of transparency. This fast curing silicone rubber showcases impressive elongation values and maintains excellent tear resistance. Thanks to its addition cure process, the vulcanization reaction occurs significantly faster compared to peroxide curing materials. Importantly, no peroxide decomposition products are formed during the vulcanization process.
Wacker Chemie AG
ELASTOSIL® R Plus 4000/60 US
Polymer Name:
Silicone Elastomer
Features:
Excellent Transparency Properties, Good Mechanical Properties, Tear Resistance, High Consistency, Food Contact Acceptable
Tear Strength:
48.0 - 48.0 kN/m
ELASTOSIL® R Plus 4000/60 US HCR silicone rubbers are two-part compounds (batch grades) that cure through addition-curing. The resulting vulcanizates exhibit excellent transparency and good to very good mechanical properties. When properly postcured, these vulcanizates comply with BfR and FDA regulations for food contact. They also meet USP XXIII Class VI and ISO 10993 certification requirements. The vulcanization process does not produce peroxide decomposition products. To achieve intermediate hardness, different durometer grades can be blended with the PT 2 catalyst added last.
Wacker Chemie AG
ELASTOSIL® LR 3842/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized, Low Volatility
Tear Strength:
37.0 - 37.0 kN/m
ELASTOSIL® LR 3842/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
ELASTOSIL® LR 3020/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods
Features:
Low VOC, Cost Effective, Heat Stabilized, Food Contact Acceptable, Steam Resistant, Low Volatility, Hot Water Resistant, Fast Curing, Pigmentable
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® LR 3020/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3020 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. Its vulcanizates are noted for excellent steam resistance. This product can be used within a temperature range of -55 °C to +210 °C.
Wacker Chemie AG
SILPURAN® 6600/60 A/B
End Uses:
Medical/Healthcare Applications, Gaskets, Valves, Medical Devices
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Low Friction
Tear Strength:
26.0 - 26.0 kN/m
SILPURAN® 6600/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
POWERSIL® 3100 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Electrical Components, Arresters, Insulators, Arresters Housings, Bushings, Power Transformers
Features:
High Impact Resistance, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Shock Resistant, Arc Resistant, Excellent Dielectric Properties, Light Weight, High Consistency, Tracking Resistant, Long Term Protection
Tear Strength:
20.0 - 20.0 kN/m
POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.
Wacker Chemie AG
SILMIX® M40 Gray
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 Gray is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® M40 Gray is designed for fabricating molded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3003/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Plugs, Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
SILPURAN® 6700/50 A/B
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Features:
Pigmentable, Low VOC, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Good Mechanical Properties
Tear Strength:
24.0 - 24.0 kN/m
SILPURAN® 6700/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
Wacker Chemie AG
SILPURAN® 6740/40 A/B
Processing Methods:
Injection Molding
End Uses:
Medical Devices, Medical/Healthcare Applications
Features:
Low VOC, Tear Resistance, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Good Mechanical Properties, Pigmentable
Tear Strength:
27.0 - 27.0 kN/m
SILPURAN® 6740/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber compound with a short curing time. Vulcanizates are noted for their self-adhesive properties on various substrates and excellent mechanical properties. SILPURAN® 6740/40 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® LR 3040/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods, Automobile Door Seals
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3040/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent).
Wacker Chemie AG
ELASTOSIL® R Plus 4020/70 MH
Polymer Name:
Silicone Elastomer
Features:
Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® R Plus 4020/70 MH is a one-component, high consistency silicone rubber designed for the manufacture of molded articles. The cured articles demonstrate exceptional tear resistance and high transparency. This fast-curing silicone rubber also exhibits excellent tear resistance properties. The addition cure process ensures a significantly faster vulcanization reaction compared to peroxide curing materials. Additionally, it is important to note that no peroxide decomposition products are formed during the vulcanization process.
Wacker Chemie AG
ELASTOSIL® R 573/70 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Band Electrodes, Ignition Cables, Gaskets, Battery Cable, Profiles
Features:
Electrically Conductive, Low Volume Resistivity, High Consistency, Electromagnetic Shielding (EMI)
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® R 573/70 A/B is a two-component, electrically conductive HCR silicone rubber for the manufacture of electrically conductive products. This product is an addition-cured electrically conductive HCR silicone rubber that shows a low volume resistivity. This product can be used within a temperature range of -55 °C to +210 °C.
Wacker Chemie AG
ELASTOSIL® LR 3003/50 US A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Features:
Excellent Transparency Properties, Fast Curing, Excellent Mechanical Strength, Pigmentable
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® LR 3003/50 US A/B is a liquid silicon rubber that belongs to a product family that meets several compliance standards. These include 21CFR 177.2600, which covers "rubber articles intended for repeated use," Recommendation XV for silicones, BfR, USP 23 Class VI, and ISO 10993 for short-term implantation (less than 30 days).
Wacker Chemie AG
POWERSIL® 730 A/B
Processing Methods:
Injection Molding
End Uses:
Cables, Cable Accessories, Insulators, Wires
Features:
Good Weather Stability, Good Electrical Properties, Outdoor Durability, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Good Processability, Arc Resistant, UV Resistant, Excellent Dielectric Properties, Easier Processing, Low Viscosity, Tracking Resistant
Tear Strength:
26.0 - 26.0 kN/m
POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.
Wacker Chemie AG
SILPURAN® 6000/10 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Medical/Healthcare Applications, Gaskets, Valves, Medical Devices, Connectors
Features:
Fast Curing, Excellent Surface Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Low Volatility
Tear Strength:
13.0 - 13.0 kN/m
SILPURAN® 6000/10 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/10 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.
Wacker Chemie AG
POWERSIL® XLR® 630 A/B
End Uses:
Power Transformers, Cables, Arresters, Insulators, Wires
Features:
Tracking Resistant, Good Weather Stability, Good Electrical Properties, Outdoor Durability, High Impact Resistance, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Good Processability, Shock Resistant, UV Resistant, Excellent Dielectric Properties, Light Weight, Low Viscosity
Tear Strength:
25.0 - 25.0 kN/m
POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.
Wacker Chemie AG
ELASTOSIL® LR 5040/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Bathroom Accessories, Medical Devices
Features:
Low Volatility, Fast Curing, Excellent Productivity, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Food Contact Acceptable
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 5040/60 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/60 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® LR 3005/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Cables, Automobile Door Seals, Vibration Dampers, Batteries
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® LR 3846/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility
Tear Strength:
19.0 - 19.0 kN/m
ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.
Show
36
of 821 results
Go to page
1
2
3
4
5
6
7
8
9
10