company tower banner
Wacker Chemie AG Company Logo

POWERSIL® 460 MH

1 of 35 products in this brand
POWERSIL® 460 MH is a ready-to-use electrically conductive silicone rubber grade specifically designed for compression molding. It already incorporates curing agent C1. This material is electrically conductive and is suitable for applications such as stress cones for cable accessories and cold shrink accessories.

Polymer Name: Silicone Elastomer

End Uses: Cable Accessories, Cables, Wires

Features: Electrically Conductive, High Consistency

Tear Strength: 35.0 - 35.0 kN/m

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Additives Included
Chemical Family
Polymer Name
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers End Uses
Applications

Cable Accessories

Application Details
  • Stress cones for cable accessories
  • Cold shrink accessories

Processing

To obtain the optimum electrical properties, it is necessary to post-cure for at least 4 h at 200°C after vulcanisation. Minimum temperature for crosslinking is 170°C. Contact with solvents or oils (also with silicone fluids) should be avoided, as the results in changes of the electrical conductivity.

Properties

Cured Properties
ValueUnitsTest Method / Conditions
Density1.15g/cm³DIN EN ISO 1183-1 A
Elongation (at break)650 - 700 %ISO 37 Type 1
Shore Hardness A50DIN ISO 48-4
Tear Strength35N/mmASTM D 624 B
Tensile Strength7.5N/mm²ISO 37 Type 1
Volume Resistivity50Ohm-cmIEC 62631-3-1
Properties

Electrically conductive

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Country Availability
Regional Availability
  • Africa
  • Asia
  • Europe
  • Latin America
  • Middle East
  • North America
  • Oceania