Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
- Applications
- SILMIX M40 GRAY is for fabricating molded articles.
- Postcured parts can be used for food contact applications and are suitable for use under the Recommendation "XV. Silicones" of the BfR and FDA § 177.2600 under observance of any given limitations on extractable and volatile substances.
Properties
- Color
- Typical Properties
Value Units Test Method / Conditions Specific Gravity (at 20°C) 1.12 g/cm³ - - Cured Properties
Value Units Test Method / Conditions Compression Set (Curing Agent C6, at 22 hours, 175°C) 16 % ASTM D 395, Method B Elongation (at break, Curing Agent C6) 730 % ASTM 412 Shore Hardness A (Curing Agent C6) 41 - ASTM D 2240 Tear Strength (Curing Agent C6) 150 ppi ASTM D 624 B Tensile Strength (Curing Agent C6) 1500 psi ASTM D 412 - Note
Cure conditions for cured properties: 10 min at 350°F (177°C).
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories