Products in Thermoplastic Polyamide Elastomers (TPE-A)

41 Products found in Thermoplastic Polyamide Elastomers (TPE-A)

Ecomass® Compound 1002ZC76 banner

Ecomass TechnologiesEcomass® Compound 1002ZC76

Density:3000.0 - 3000.0 kg/m³

Ecomass® Compound 1002ZC76 is a stainless steel powder-filled polyether block amide (PEBA) compound that is flexible and exhibits excellent toughness. The processing method for this compound is injection molding/extrusion. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.

Ecomass® Compound 1080CO94 banner

Ecomass TechnologiesEcomass® Compound 1080CO94

Polymer Name:Polyether Block Amide (PEBA)
Fillers Included:Copper
Density:6000.0 - 6000.0 kg/m³
Processing Methods:Injection Molding

Ecomass® compound 1080CO94 is a copper powder-filled polyamide alloy that is recommended to be used in weighting, balancing and vibration damping applications. This injection molding grade is known for its good toughness, and rigidity. Additionally, it is a nontoxic thermoplastic that can substitute lead.

Ecomass® Compound 1002TU77 banner

Ecomass TechnologiesEcomass® Compound 1002TU77

Density:3700.0 - 3700.0 kg/m³

Ecomass® Compound 1002TU77 is a high-specific-gravity, tungsten powder-filled polyether block amide (PEBA) compound. The processing method for this compound is injection molding/extrusion. It is a nontoxic alternative to lead (Pb) and is used for weighting, balancing, and radiation shielding applications.

Ecomass® Compound 1002ZB92 banner

Ecomass TechnologiesEcomass® Compound 1002ZB92

Density:6900.0 - 6900.0 kg/m³

Ecomass® compound 1002ZB92 is a filled polyether block amide compound that is recommended to be used for applications requiring weighting, balancing, and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and rigidity. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® Compound 1050CO93 banner

Ecomass TechnologiesEcomass® Compound 1050CO93

Polymer Name:Polyether Block Amide (PEBA)
Fillers Included:Copper
Density:5700.0 - 5700.0 kg/m³
Processing Methods:Injection Molding

Ecomass® compound 1050CO93 is a copper powder-filled polyamide alloy that is recommended to be used in applications requiring weighting and balancing. This injection molding grade is known for its high specific gravity, good toughness, and rigidity. Additionally, it is a nontoxic lead substitute thermoplastic.Density: 5.7 g/cc

Ecomass® Compound 1002ZD95 banner

Ecomass TechnologiesEcomass® Compound 1002ZD95

Density:10000.0 - 10000.0 kg/m³

Ecomass® Compound 1002ZD95 is a tungsten powder-filled polyether block amide (PEBA) compound that is flexible and exhibits excellent toughness. The processing method for this compound is injection molding/extrusion. It is a nontoxic alternative to lead (Pb) and is used for weighting, balancing, and radiation shielding applications.

Ecomass® Compound 1007TU78 banner

Ecomass TechnologiesEcomass® Compound 1007TU78

Density:3800.0 - 3800.0 kg/m³

Ecomass® compound 1007TU78 is a tungsten powder-filled polyether block amide compound that is recommended to be used in applications requiring weighting, balancing, and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® Compound 1002ZD93 banner

Ecomass TechnologiesEcomass® Compound 1002ZD93

Density:8000.0 - 8000.0 kg/m³

Ecomass® compound 1002ZD93 is a tungsten powder-filled polyether block amide compound that is recommended to be used in applications requiring weighting, balancing, and radiation shielding. This injection molding/extrusion grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® Compound 1002CO90 banner

Ecomass TechnologiesEcomass® Compound 1002CO90

Density:5100.0 - 5100.0 kg/m³

Ecomass® Compound 1002CO90 is a high-specific-gravity, copper powder-filled polyether block amide (PEBA) compound. The processing method for this compound is injection molding/extrusion. Ecomass® Compound 1002CO90 is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.

Ecomass® Compound 1007ZC85 banner

Ecomass TechnologiesEcomass® Compound 1007ZC85

Density:3800.0 - 3800.0 kg/m³

Ecomass® compound 1007ZC85 is a stainless steel-filled polyether block amide compound, commonly used in applications that require weighting, balancing, and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® Compound 1002ZD96 banner

Ecomass TechnologiesEcomass® Compound 1002ZD96

Polymer Name:Polyether Block Amide (PEBA)
Fillers Included:Tungsten
Density:10000.0 - 10000.0 kg/m³
Processing Methods:Extrusion, Injection Molding

Ecomass® compound 1002ZD96 is a tungsten powder-filled polyether block amide compound that is recommended to be used in applications requiring weighting, balancing, and radiation shielding. This extrusion grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® Compound 1050CO94 banner

Ecomass TechnologiesEcomass® Compound 1050CO94

Polymer Name:Polyether Block Amide (PEBA)
Fillers Included:Copper
Density:6000.0 - 6000.0 kg/m³
Processing Methods:Injection Molding

Ecomass® Compound 1050CO94 is a copper powder-filled polyamide alloy at 6.0 g/cc that is recommended to be used in applications requiring weighting, balancing, and frangible projectiles. This injection molding grade is known for its good toughness, and rigidity.

Ecomass® Compound 1005ZD96 banner

Ecomass TechnologiesEcomass® Compound 1005ZD96

Density:10000.0 - 10000.0 kg/m³

Ecomass® compound 1005ZD96 is a tungsten powder-filled polyether block amide compound that is recommended to be used in applications requiring weighting, balancing, vibration dampening and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® Compound 1002TU96 banner

Ecomass TechnologiesEcomass® Compound 1002TU96

Density:11000.0 - 11000.0 kg/m³

Ecomass® compound 1002TU96 is a tungsten powder-filled polyether block amide compound that is utilized in various applications such as weighting, balancing, vibration dampening, and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.

Ecomass® Compound 1005TU96 banner

Ecomass TechnologiesEcomass® Compound 1005TU96

Density:11000.0 - 11000.0 kg/m³

Ecomass® Compound 1005TU96 is a tungsten powder-filled polyether block amide (PEBA) compound that is flexible and exhibits excellent toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting, balancing, and radiation shielding applications.

Ecomass® Compound 1002ZC85 banner

Ecomass TechnologiesEcomass® Compound 1002ZC85

Density:3750.0 - 3750.0 kg/m³

Ecomass® compound 1002ZC85 is a stainless steel powder-filled co-polyamide compound that is recommended to be used in applications that require weighting, balancing, and vibration dampening. This injection molding/extrusion grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead substitute thermoplastic.

Ecomass® Compound 1002CO93 banner

Ecomass TechnologiesEcomass® Compound 1002CO93

Density:5700.0 - 5700.0 kg/m³

Ecomass® Compound 1002CO93 is a high-specific-gravity, copper powder-filled polyether block amide (PEBA) compound. The processing method for this compound is injection molding. Ecomass® Compound 1002CO93 is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.

NY-FLEX® CT 164 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® CT 164 E

Flexural Modulus:360.0 - 360.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

NY-FLEX® CT 155 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® CT 155 E

Flexural Modulus:145.0 - 145.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

NY-FLEX® CT 172 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® CT 172 E

Flexural Modulus:825.0 - 825.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

NY-FLEX® 140 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® 140 E

Flexural Modulus:79.0 - 79.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

NYCOADAPT 2047 banner

Nylon Corporation of America (NYCOA)NYCOADAPT 2047

Polymer Name:Thermoplastic Polyamide Elastomer
Processing Methods:Extrusion
End Uses:Tubing, Trimmer Line, Monofilaments, Film
Features:Easier Processing, Excellent Toughness, Excellent Flexibility, Low Melting Point, High Melt Strength, Flexible, Good Barrier Properties, High Viscosity
Certifications & Compliance:ISO 9001, FDA Compliant
Flexural Modulus:1901.64 - 1901.64 MPa

NYCOADAPT 2047 is a Nylon copolymer developed especially for applications that demand easy processing. Its lower melting point, greater flexibility, and lower crystallinity than standard nylon resins, makes it ideal for a variety of extrusion applications. In addition, the high relative viscosity provides excellent melt strength and toughness after processing.

XELIGHT™ 17-92-P3 banner

XeniaXELIGHT™ 17-92-P3

Polymer Name:Polyether Block Amide (PEBA)
End Uses:Structural Parts, Sporting Goods
Features:High Hydrolytic Stability, Dimensional Stability, Good Thermal Stability, Good Mechanical Properties, Light Weight, Low Temperature Impact Resistance, Good Impact Strength, Pigmentable, Low Density, Excellent Flexibility, Low Temperature Flexibility
Flexural Modulus:700.0 - 700.0 MPa

XELIGHT™ 17-92-P3 is a lightened PEBAX®

XECARB® SL 17-C15-P2 banner

XeniaXECARB® SL 17-C15-P2

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Robotics, Structural Parts, Drones, Sporting Goods, Aerospace Applications, Mountaineering Boots
Features:Dimensional Stability, Good Aging Behavior, Low Temperature Toughness, Good Mechanical Properties, UV Resistant, Light Weight, Renewable Resource Content, Good Environmental Stress Crack Resistance (ESCR), Good Weather Stability
Flexural Modulus:3000.0 - 3000.0 MPa

XECARB® SL 17-C15-P2 is a 15% carbon fiber reinforced PEBA

XeniaXECARB® 17-C30-P10-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:8500.0 - 8500.0 MPa

XECARB® 17-C30-P10-P3 is a 30% carbon fiber reinforced PEBA

XeniaXECARB® 17-C30-P6

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:1500.0 - 1500.0 MPa

XECARB® 17-C30-P6 is a 30% carbon fiber reinforced PEBA

XECARB® SL 17-C15-P6 banner

XeniaXECARB® SL 17-C15-P6

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Robotics, Structural Parts, Drones, Sporting Goods, Aerospace Applications, Mountaineering Boots
Features:Dimensional Stability, Good Aging Behavior, Low Temperature Toughness, Good Mechanical Properties, UV Resistant, Light Weight, Renewable Resource Content, Good Environmental Stress Crack Resistance (ESCR), Good Weather Stability
Flexural Modulus:1500.0 - 1500.0 MPa

XECARB® SL 17-C15-P6 is a 15% carbon fiber reinforced PEBA

XeniaXECARB® 17-C30-P2

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:4500.0 - 4500.0 MPa

XECARB® 17-C30-P2 is a 30% carbon fiber reinforced PEBA

XELIGHT™ 17-87-P2 banner

XeniaXELIGHT™ 17-87-P2

Polymer Name:Polyether Block Amide (PEBA)
End Uses:Structural Parts, Sporting Goods
Features:High Hydrolytic Stability, Dimensional Stability, Good Thermal Stability, Good Mechanical Properties, Light Weight, Low Temperature Impact Resistance, Good Impact Strength, Pigmentable, Low Density, Excellent Flexibility, Low Temperature Flexibility
Flexural Modulus:330.0 - 330.0 MPa

XELIGHT™ 17-87-P2 is a lightened PEBAX®

XECARB® HM 17-C30-P3 banner

XeniaXECARB® HM 17-C30-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Sporting Goods, Mountaineering Boots, Gears
Features:High Tensile Strength, Good Mechanical Properties, High Strength, Excellent Tensile Properties, High Modulus, Light Weight, Low Temperature Impact Resistance, High Stiffness, Good Impact Strength, Good Tenacity
Flexural Modulus:9000.0 - 9000.0 MPa

XECARB® HM 17-C30-P3 is a 30% carbon fiber reinforced PEBA

XeniaXECARB® 17-C30-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:8500.0 - 8500.0 MPa

XECARB® 17-C30-P3 is a 30% carbon fiber reinforced PEBA

NYCOADAPT 2012 banner

Nylon Corporation of America (NYCOA)NYCOADAPT 2012

Polymer Name:Thermoplastic Polyamide Elastomer
Processing Methods:Extrusion, Injection Molding
End Uses:Profiles, Tubing, Food Packaging
Features:Good Thermal Stability, Excellent Flowability, High Melt Viscosity, Low Moisture Absorption, Flame Retardant, Resilient, Heat Stabilized, High Impact Resistance, Easier Processing, Excellent Toughness, Good Processability, UV Stabilized, Excellent Strength, Medium Viscosity, Chemical Resistant, Heat Resistance, Flexible
Certifications & Compliance:FDA Compliant, ISO 9001
Flexural Modulus:1378.0 - 1378.0 MPa

NYCOADAPT 2012 is a flexible Nylon copolymer TPE particularly suitable for extrusion and injection molding applications. It has a moderately high melt viscosity, excellent processability and yields extremely tough and resilient finished articles.

XECARB® SL 17-C15-P3 banner

XeniaXECARB® SL 17-C15-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Robotics, Structural Parts, Drones, Sporting Goods, Aerospace Applications, Mountaineering Boots
Features:Dimensional Stability, Good Aging Behavior, Low Temperature Toughness, Good Mechanical Properties, UV Resistant, Light Weight, Renewable Resource Content, Good Environmental Stress Crack Resistance (ESCR), Good Weather Stability
Flexural Modulus:5500.0 - 5500.0 MPa

XECARB® SL 17-C15-P3 is a 15% carbon fiber reinforced PEBA

XEGLASS™ 17-G50-P3 banner

XeniaXEGLASS™ 17-G50-P3

Polymer Name:Polyether Block Amide (PEBA)
End Uses:Industrial Applications, Structural Parts, Gears
Features:High Impact Resistance, Dimensional Stability, Flexible, Superior Aesthetics, Good Stiffness, Good Mechanical Properties, Chemical Resistant, Noise Damping, Vibration Damping, Creep Resistant, Low Temperature Impact Resistance, Easier Processing, Low Friction, Good Impact Strength, Pigmentable, Low Density
Flexural Modulus:7000.0 - 7000.0 MPa

XEGLASS™ 17-G50-P3 is a 50% glass fiber reinforced PEBA

Agiplast Agiflex 300N055 banner

AgiplastAgiplast Agiflex 300N055

Applications:Other Industrial Applications, Sports & Recreation, Footwear
Product Families:Thermoplastic Polyamide Elastomers (TPE-A), Thermoplastic Elastomers
Chemical Family:Polyamides, Polyethers
Polymer Name:Polyether Block Amide (PEBA)
End Uses:Hoses

Agiplast Agiflex 300N055 is a polyether block amide. Agiflex 300N055 has high elasticity properties and low density. Agiflex 300N055 is especially dedicated to the Sports &Leisure markets with high properties requests.

Agiplast Agiflex 300N040 banner

AgiplastAgiplast Agiflex 300N040

Applications:Other Industrial Applications, Sports & Recreation, Footwear
Product Families:Thermoplastic Polyamide Elastomers (TPE-A), Thermoplastic Elastomers
Chemical Family:Polyamides, Polyethers
Polymer Name:Polyether Block Amide (PEBA)
End Uses:Hoses

Agiplast Agiflex 300N040 is a polyether block amide Agiflex 300N040 has high elasticity properties and low density. Agiflex 300N040 is especially dedicated to the Sports &Leisure markets with high properties requests.

Show

of 41 results