Products in Pigments & Colorants: Violet

ELASTOSIL® Color Paste PT Violet RAL 4001 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

ELASTOSIL® Color Paste PT Red Violet RAL 4002 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

Gelest Ultramarine Violet TC (VIB-TCA) is a surface-treated violet ultramarine pigment. This pigment is used to create clean, bright shades and soft pastels for long-wear eye makeup and powders. It is more cost-effective than other organic pigments and is used in various color cosmetic formulations. This pigment is coated with an alkyl silane, which provides a hydrophobic coating that increases the ease of particle dispersion in natural and synthetic fluids and helps stabilize particles in emulsion systems.

Gelest Ultramarine Violet SR (VIB-SRA) is a surface-treated violet ultramarine pigment. This pigment is used to create clean, bright shades and soft pastels for long-wear eye makeup and powders. It is more cost-effective than other organic pigments and is used in various color cosmetic formulations. This pigment is coated with a hydroxyl-terminated silsesquioxane network, which improves adhesion to skin and hair.

Gelest Ultramarine Violet SS (VIB-SSA) is a surface-treated violet ultramarine pigment. This pigment is used to create clean, bright shades and soft pastels for long-wear eye makeup and powders. It is more cost-effective than other organic pigments and is used in various color cosmetic formulations. This pigment imparts the excellent wetting properties of the shorter-chain silanes with a more emollient skin feel in powders and dispersed systems.

DCL Violet 11C is a red-violet powder produced by a high-temperature precipitation process, giving it a non-migrating and non-bleeding pigment. It has fair heat stability but poor exterior durability. Typical applications (non inclusive) are cosmetics (especially those intended for use around the eye), externally used drugs, and other applications where equivalent pigment chemistry is used.

DCL 1233 Carbazole Violet, PV.23 is a high-performance pigment with a bluish-violet color and high tint strength. It exhibits excellent fastness to light and weathering in most applications and is only slightly affected by reductions with titanium dioxide.

DCL 1029 Perylene Violet, PV.29 is a high-performance pigment that features a reddish-maroon shade with a high tinting strength. It is primarily recommended for use in plastics and solvent-based industrial coating applications. Additionally, this product is FDA-approved.

DCL 3223 Carbazole Violet, PV.23 is a high performance blue-shaded violet pigment for use in high-end coating applications where excellent fastness properties are required. This is a reliable and versatile choice for decorative, automotive, aerospace, industrial, and powder coating applications.

DCL 7019 Quinacridone Red Violet, PV.19 is a high-performance pigment developed for use in industrial coatings, automotive refinishing, and coil coatings. This reddish-violet shade is also suitable for plastic and ink applications, and is a close match to Clariant Red E5B. It is used in various high-end paint and plastic applications where excellent fastness properties are required, and is also FDA-approved.

DCL Violet 11T is a red-violet powder produced by a high temperature precipitation process, giving a non-migrating and non-bleeding pigment. It has fair heat stability but poor exterior durability. Typical applications (non inclusive) are toning clear and white resins to mask yellowing and other applications where equivalent pigment chemistry is used.

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL Violet 92 is a blue-violet powder produced by high-temperature calcination. This pigment is non-bleeding and non-migratory. It has good heat stability, moderate exterior durability, but poor acid resistance. Typical applications (non inclusive) are liquid and powder coatings, inks, dispersions, plastics, and other applications where equivalent pigment chemistry is used.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

DCL 1319 Quinacridone Red Violet, PV.19 (E3B type) is an opaque, yellow-shaded quinacridone with excellent fastness properties. It is slightly yellower and more opaque than our 1219 Quinacridone Red Violet 19, and is widely used for high-grade industrial and automotive coatings as well as water- and solvent-based inks.

Ultrablue® UPV5, PV.15 (V-5, 5011) is a low sulfur, low moisture ultramarine violet pigment. This product is mainly used in the following applications: Plastics such as PVC, PP, PS and PE. Powder and industrial coatings. Rubber and paper products Cosmetics applications

Ultrablue® V8B2, PV.15 (V-8, 5012) is a low sulfur, low moisture ultramarine violet pigment. This product is mainly used in the following applications: Plastics such as PVC, PP, PS and PE. Powder and industrial coatings. Rubber and paper products Cosmetics applications

MOCOM Compounds ALCOLOR® PC FC VT5018-15 is a violet colorant free from cadmium, lead, and diarylide pigments, dust-free and with high dispersibility. Suitable for use in electrical and electronic, furniture, building and construction, and sport and leisure markets, the dosage of this colorant should be determined based on wall thickness and desired color intensity, depending on the application and operational area.

MOCOM Compounds ALCOLOR® PE FC VT1320-06 is a violet colorant for use in polyethylene with special features such as being free from cadmium, lead, and diarylide pigments, dust-free, and having a high dispersibility and additive content. It is suitable for use in injection molded parts, blow molded parts, and extruded parts in the building and construction, packaging, and household goods market segments.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM HT Violet Concentrate is a violet-colored concentrate designed for use in medium to high-flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM-HT and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 100 Violet Concentrates are violet-colored concentrates designed for use in low-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Chemours Teflon® FEP 100 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE 7 Violet Concentrate is a violet color concentrate designed for use in low and medium flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® C-88A and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 2100 Violet Concentrate is a color concentrate in violet color designed to be used in medium flow PFA (Perfluoroalkoxy) for pigmentation. It is available in the form of small pellets, approximately 0.080 inches long by 0.080 inches in diameter. It is used to add color to injection-molded parts, film, tubing, colored wire or jacket insulation when a pigmented appearance is desired.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9800 Violet Concentrate is a violet-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ PFA 3000 Violet Concentrate is a violet-colored concentrate designed for use in high-flow PFA (Perfluoroalkoxy) for pigmentation. The color concentrate is based on Fluon® PFA P-62X and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 9400 Violet Concentrate is a violet-colored concentrate designed for use in high-flow FEP (Fluorinated ethylene propylene) for pigmentation. The color concentrate is based on Chemours Teflon® FEP TE-9494 and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter by 0.080 inches long. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ ETFE C-88AXM Violet Concentrate is a violet color concentrate designed for use in medium to high flow ETFE (Ethylene tetrafluoroethylene) for pigmentation. The color concentrate is based on Fluon® ETFE C-88AXM and is supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. This product finds major applications in colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

AGC Chemicals Americas, Inc. Fluon+™ FEP 102 Violet Concentrates are violet-colored concentrates designed for use in high-flow FEP (fluorinated ethylene propylene) for pigmentation. The color concentrates are based on Neoflon® FEP NP-102 and are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches long by 0.080 inches in diameter. It finds applications in colored injection-molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.

Angstrom Technologies CS-03M is an inorganic pigment and an optically variable pigment (OVP). Depending on the viewing angle, the visible color shifts from green to violet. This pigment is suitable for the manufacture of optically variable inks (OVIs). In its physical state, it is an odorless, free-flowing crystalline powder with a visible color of green or violet.

Angstrom Technologies CS-03 is an inorganic pigment and an optically variable pigment (OVP). Depending on the viewing angle, the visible color shifts from green to violet. This pigment is suitable for the manufacture of optically variable inks (OVIs). In its physical state, it is an odorless, free-flowing crystalline powder with a visible color of green or violet.

ECONYL® VIOLET VL1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SMART VIOLET V1 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC VIOLET A5-V colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® PREMIUM VIOLET VLO 1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECONYL® VIOLET VR1 are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® SB VIOLET 10 colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.