Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Carrier
- Pigment Type
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Product Code
- 467015821
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- End Uses
Colored injection molded parts, film, tubing, colored wire or jacket insulation where a pigmented appearance is required.
Properties
- Color
- Physical Form
- Typical Physical Properties
Value Units Test Method / Conditions a* 29.8 - (CIELAB, 10° obs., D65) b* -35.6 - (CIELAB, 10° obs., D65) Bulk Density 1100 g/L - Dispersion Quality 0.0015 inches - L* 37.9 - (CIELAB, 10° obs., D65) MFR 12 g/10 min - RAL Approx. 4005 - -
Technical Details & Test Data
- Processing
These products are added (approximately 1-2%) to natural ETFE and processed using conventional thermoplastic techniques such as injection molding and melt extrusion.
Safety & Health
- Hazardous Substances
This product does not contain lead, hexavalent chromium, or cadmium, and are used in applications where RoHS (Restrictions on the use of Certain Hazardous Substances) compliance is required.
- Safe Handling Information
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are:
- Physical hazards: None
- Health hazards: None
Packaging & Availability
- Packaging Type
- Packaging
Fluon+ ETFE 7 series color concentrates are packaged in a polyethylene pail containing 25 pounds.
Storage & Handling
- Handling Precautions
- Heating Fluon® and Fluon+™ products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.
- Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin.