Products in Plastics: Stabilizer

ELASTOSIL® AUX Stabilizer H0 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.

Harcros Triphenyl Phosphite is a multifunctional additive used in chemical manufacturing. It belongs to the chemical families of ethers, phosphites, and organophosphorus compounds. The chemical name is triphenyl phosphite, and it functions as an antioxidant, stabilizer, rheology modifier, and intermediate, offering enhanced stability and processing in a variety of industrial applications.

ELASTOSIL® AUX Stabilizer H3 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

GENIOSIL® Stabilizer T is a liquid system specifically formulated for transparent waterproofing liquid membranes utilizing GENIOSIL® silane-modified polymers. Additionally, it is suitable for stabilizing standard transparent sealant and adhesive formulations based on GENIOSIL® silane-modified polymers. The product contains a synergistic blend of 33% UV absorber and 33% HALS, combined within vinyltrimethoxy silane GENIOSIL® XL 10.

ELASTOSIL® AUX Stabilizer H4 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

GENIOSIL® Stabilizer F is a liquid system specifically developed for filled waterproofing liquid membranes that utilize GENIOSIL® silane-modified polymers. This product is also suitable for stabilizing standard filled sealant and adhesive formulations based on GENIOSIL® silane-modified polymers. It contains a synergistic blend of 20% UV absorber and 40% HALS, combined within vinyltrimethoxy silane GENIOSIL® XL 10.

ELASTOSIL® AUX Stabilizer H6 F is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H1 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H6 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

Dragonsorb® 791 is a synergistic mixture of oligomeric hindered amine light stabilizers (a mixture of light stabilizers 770 and 944). It is an excellent light stabilizer for thick products, such as car bumpers, dashboards, garden tables and chairs, etc. The synergistic effect between the high molecular weight and low molecular weight hindered amine light stabilizer components in Dragonsorb® 791 maximizes the protection of the polymer from degradation due to UV radiation and long-term heating. Its application fields include PP, PP/EPDM, and PP/PE/EPDM mixture (TPO class).

Dragonsorb® 123 is a light stabilizer with low alkalinity. It is widely used in acrylic resin, polyurethane, sealant, adhesive, rubber, TPE and TPO blends, PVC, polystyrene, polypropylene, and other unsaturated resins. Additionally, as this product reacts in a cross-chain with other ingredients in the paint formula, it is especially recommended for the paint. It has excellent resistance to acid, flame retardant, sulfur, and catalyst residue.

Dragonsorb® 3529 is a highly effective light stabilizer. It is suitable for PE films, PP films, and other plastics used as non-food consumer packaging.

Dragonox® SP is a mixture of styrenated phenols. It is a non-staining and non-discoloring liquid stabilizer that effectively inhibits the degradation of elastomers and their vulcanizates. This product is suitable for all applications requiring excellent color stability and medium heat resistance at a low cost.

Dragonsorb® 770 is a hindered amine light stabilizer used for anti-photooxidation aging of polyethylene, polypropylene, and polystyrene products. It also has a good effect on ABS resin, polyurethane, polyester, and other plastics. This product provides good light stability on plastic moldings, even when used in small quantities. When working with antioxidants, it improves heat resistance, and when mixed with other UV absorbers, it provides greater UV resistance.

Dragonsorb® 292 is a hindered amine light stabilizer that is mainly used in paints, coatings, inks, polyurethane paints, etc. This product has a synergistic effect with ultraviolet absorbers. It can effectively prevent the coating from maintaining luster under sun exposure and avoid cracking, spots, and surface peeling, thus greatly improving the coating life. This effect is better in automobile coatings.

Dragonox® PS802 is an effective stabilizer in polyolefins, especially in polypropylene and HDPE. They are usually used in combination with phenolic antioxidants to enhance aging stability and photostability. In most cases, the additive effect is better than the main antioxidant alone, and the initial color of the material will also be improved. It is especially suitable for the stability of high-impact polystyrene and ABS resin. This product also improves the use effect of phenolic antioxidants. Additionally, it can be used in animal and vegetable oils, fats, paraffin, soap, and other organic compounds.

Dragonsorb® BP6 is a kind of water-soluble, neutral, broad-spectrum benzophenone ultraviolet absorber. It has a high absorption efficiency, is non-toxic, has no teratogenic side effects, and has good light and thermal stability. At present, it is the most commonly used light stabilizer, which can strongly and selectively absorb high-energy ultraviolet light and conduct energy conversion in the form of thermal energy. This substance is mainly used in water-soluble chemical sunscreens, sunscreens, and emulsions. It can improve the color durability of dyed textiles, prevent wool textiles from yellowing and synthetic fiber fabrics from fading, and can also be used in hair gel, mousse, and other hair products to prevent hair damage such as graying of hair caused by ultraviolet radiation.

Dragonox® 4000 functions as a stabilizer which can provide excellent thermal stability as well as color improvement. This light yellow, transparent liquid is widely used in PVC (Polyvinyl Chloride), ABS (Acrylonitrile Butadiene Styrene), SBR (Styrene Butadiene Rubber), etc.

Dragonsorb® 119 is a polymer hindered amine light stabilizer (HALS), suitable for PE agricultural film, PP fiber and talc-filled PP, and TPO auto parts. This product can also be used in powder coating, which not only brings a triboelectric effect but also light stability. Generally, the addition level ranges between 0.05 and 1%.

Dragonsorb® 622 is a hindered amine light stabilizer that can be used in polyethylene, polypropylene, polyurethane, POM, polyamide, and polyester elastomers. It can also be used in ABS and engineering plastics. This product is approved for food packaging in some countries.

Dragonsorb® 783 has good compatibility, processing thermal stability, oil resistance, water resistance, and extraction resistance. This product reflects the mechanisms of various light stabilizers and has the best synergistic and complementary effect. It can be used for food packaging and is mainly used for PE agricultural film, polyethylene, polypropylene, polyurethane, polyamide, and polyester elastomers. This product can also be used in ABS and engineering plastics.

Dragonox® TNPP is a general-purpose phosphite stabilizer and antioxidant. This product can be used in most polymers such as high-density polyethylene (HDPE), linear low density polyethylene (LLDPE), styrene butadiene rubber (SBR), acrylonitrile butadiene styrene (ABS), polyvinyl chloride (PVC), and other polymers.

Dragonsorb® 1084 is mainly used in polyethylene greenhouse films and agricultural films. It has strong compatibility with polyolefin products, and when used in polyethylene agricultural films and polypropylene artificial turfs, it has high stability. This product has high pesticide and acid resistance and is widely used in polypropylene, polyethylene fiber, artificial turf, and other fields. Additionally, it can be used with other forms of stabilizers, especially UV absorbers.

Dragonsorb® 3853 is a new hindered amine light stabilizer that is used in polyolefin plastic, polyurethane, ABS resin, coatings, adhesives, rubber, etc. This light yellow waxy solid has excellent light stability and the advantages of non-toxicity, low price, and cost-effectiveness.

Dragonsorb® 312 has a low-volatile polar substance and good thermal stability. Contact with metal ions will not decolorize, especially with short-wavelength ultraviolet light. Therefore, it is often used as a brightener and stabilizer of UV curing systems. This product is recommended for PA, PC, PVC, PU, and PET/PBT resins.

Dragonox® P-EPQ is a phosphite antioxidant with high hydrolytic stability. As an auxiliary antioxidant, this product can react with hydroperoxides generated during the polymer automatic oxidation process, thus preventing the degradation caused by processing and acting synergistically with the main antioxidant.

Dragonox® BHT is a phenolic antioxidant that is widely used in polymer materials, petroleum products, and the food processing industry. It is a common rubber antioxidant that has a protective effect on heat and oxygen aging. It is easy to disperse in rubber and can be directly mixed into rubber or added to latex as a dispersion. This volatile product can also be used as a gelling inhibitor in SBR and as an effective stabilizer in polyethylene, polyvinyl chloride (dosage 0.01 - 0.1%), and polyethylene ether.

Dragonox® PS800 is an effective stabilizer for polyolefins, especially polypropylene and HDPE. Generally, they are mixed with phenolic antioxidants, which can enhance aging stability, light stability, and improve the initial color. It is especially suitable for the stability of high-impact polystyrene and ABS resin. It can also be used in animal and vegetable oils, fats, paraffin, soap, and other organic compounds.

Blachford Calcium Stearate 325 is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The 325 grade is manufactured using tallow-derived stearic acid and is ground to a finer particle size than L-155.

Blachford Calcium Stearate L-155 is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The L-155 grade is manufactured using tallow derived stearic acid.

Blachford Calcium Stearate L-155V is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The L-155V grade is manufactured using a vegetable derived stearic acid.

Blachford Calcium Stearate Coarse is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The Coarse grade is manufactured using tallow-derived stearic acid and is finished differently in order to produce a more granular, lower-dusting product.