Products in Additive Masterbatches

ELASTOSIL® AUX Stabilizer H0 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

SILPURAN® AUX 8251 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for addition-cured high-consistency silicone rubber. SILPURAN® AUX 8251 RO is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® AUX FL Non-Healing is a ready-to-use masterbatch comprising specific additives and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures homogeneous covulcanization without migration, as may be observed for systems based on silicone oil. It can be used to reduce self-healing and other sticking phenomena.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SABIC's Specialties Business LNP™ COLORCOMP™ Compound WQ117945 is a PET based masterbatch for foaming applications containing a nanostructured, non-mineral based additive. Typical usage levels in final foam formulations are below 5%.

GENIOPLAST® PP50S12 MG is a pelletized masterbatch formulation. It contains 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. This formulation is specifically developed as an additive to enhance scratch resistance in polypropylene-based compounds for automotive interior applications.

ELASTOSIL® AUX Stabilizer H6 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H3 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H4 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H6 F is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H1 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

GENIOPLAST® PP 20A08 is a pelletized formulation consisting of 20% functional silicone dispersed in polypropylene. It has been specifically developed as a compounding additive for unfilled and filled thermoplastic polyolefin compounds. This product is odorless. When used within the recommended levels (0.5 - 2%), GENIOPLAST® PP 20A08 does not have a negative impact on the thermo-mechanical properties of the compounds it is added to. Additionally, due to its specific effect, the processing temperature of the polyolefin compound can be slightly lowered.

GENIOPLAST® PP50S12 is a pelletized masterbatch formulation comprising 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. It is specially designed as an additive to enhance scratch resistance in polypropylene-based compounds used in automotive interior applications.

Flytac 192 is a water-white thermoplastic resin obtained from the polymerization of aromatic and hydrogenation. It is widely applied in hot melt adhesive (HMA), and pressure sensitive adhesive (PSA) because of its good heat resistance and good compatibility with base polymers such as SIS, EVA, SBS, SEBS, and polyolefin. It can also be used in road marking, BOPP masterbatch, and rubber compounding.

CONSTAB AB 06051 LD is a product comprising 20% synthetic silica with a 10 µm particle size. This product serves as an anti-blocking agent. It's compatible with polyethylenes (PE) and resin-based materials and finds applications within the printing and packaging market, including food and beverage packaging and industrial and transport packaging, as well as plastics and elastomers for cast films, film, and food packaging.

CONSTAB SL 05004 PPR is a product that functions as a slip agent. It uses polypropylene (PP) as its carrier and features general purpose, a low coefficient of friction, and low blooming. CONSTAB SL 05004 PPR consists of 5% erucamide in copolymer and has a special feature for skin layer application.

CONSTAB AB 06062 PPR is an anti-blocking agent product using a resin-based polypropylene (PP) carrier. It features metallizability, good barrier properties, good printability, excellent haze, and a low coefficient of friction. This product contains 5% x-linked siloxane (2 µm) in copolymer.

CONSTAB CON-X® AT 452 PE is a product that functions as an anti-static agent. It is labelled as recyclable and sustainable and uses polyethylene (PE) as its carrier. The features include flexibility, freeze resistance, recyclability, clarity, tear resistance, excellent seal properties, high efficiency, and excellent haze. CONSTAB CON-X® AT 452 PE is suitable for food packaging applications and is transparent.

CONSTAB AF 00238 PP is an anti-fogging agent product with labelling claims for food contact acceptability. It uses polypropylene (PP) as its carrier and features good printability, food contact acceptability, low haze, and a low coefficient of friction. This product serves as an antifog agent for food packaging applications.

CONSTAB CON-Batch 30X is particularly suitable for molded articles like containers, enabling downgauging of up to 30% of the total thickness without compromising its mechanical integrity. Additionally, it functions as an effective processing aid, improving optical properties, mechanics, and barrier performance, making it an excellent choice for container applications.

CONSTAB AB 06001 LD presents another high-quality pe-film product with 10% synthetic silica and a particle size of 4 µm. Serving as an anti-blocking agent, it aligns with the demands of the printing and packaging industries, specifically in food and beverage packaging and industrial and transport packaging.

KAFRIT AB 0F210 LL is a high-quality pe-film product featuring 10% synthetic silica with a particle size of 4 µm. As an anti-blocking agent, it ensures consistent high quality for packaging applications in food and beverage packaging and industrial and transport packaging.

KAFRIT UVA 60D23 PC is a polycarbonate with anti-glare properties. The purpose of this product is to eliminate the glossy surface appearance of the sheets. As this is a surface phenomenon, the product is always combined with UVA and applied to the sheets in the same manner as the UV cap layers. The effect obtained can also be referred to as a matte effect. The product is based on cross-linked polymeric spheres (similar to the light diffuser additives) that create a microstructure on the surface, interfering with the glossy appearance. It is recommended to apply the product at a layer thickness of 40€“50 μm to achieve the best effect. The surface effect is classified as medium, resulting in a matt appearance.

CONSTAB UV 06250 LL is a general-purpose UV stabilizer, functioning as a UV protector. It can be used in blow molding and injection molding processes and uses polyethylene (PE) as its carrier. The product is suitable for general-purpose applications.

CONSTAB CONSLIP® 201 PPR is a low-concentrated permanent slip in terpolymer, antiblock-free product, functioning as a slip agent. It uses polypropylene (PP) as its carrier and features being metallizable, good printability, and providing slip with a low coefficient of friction. This product is used in the printing and packaging markets.

KAFRIT SAB 0C430 EVA functions as a slip and anti-blocking agent specifically designed for compatible films in the rubber industry. It's ideal for processing in banburys or kneaders. This formulation aligns with ethylene vinyl acetate (eva) polymers and resins, and the carrier includes polyethylenes (PE), resin-based, and ethylene vinyl acetate (eva).

KAFRIT UVA 07160 LD is a product that, with its 3000+ ppm sulphur content, exhibits superior stability to agrochemicals and provides long-lasting UVA protection. It functions as both an ultraviolet absorber and a UV protector, making it suitable for various applications. The carrier materials compatible with this product include polyethylene (PE) and resin-based compounds. Additionally, the UVA 07160LD features UV-absorbing properties and is resistant to chemical degradation.

CONSTAB AB 06084 PPR is an anti-blocking agent product that uses polypropylene (PP) as its carrier. CONSTAB AB 06084 PPR features a matte finish, a low coefficient of friction, and excellent haze. This product consists of 7.5% PMMA (6 µm) in copolymer.

KAFRIT UV 00E82 LD is a UV protector that provides improved resistance to agrochemicals and is labelled as "uv open." It is compatible with carrier materials such as resin-based and polyethylene (PE) compounds. The product is characterized by its chemical resistance properties, which make it suitable for various applications where exposure to chemicals may occur.

KAFRIT UVA 6D49B PC is a polycarbonate with a UV cap layer. Most PC sheets are protected by a thin co-extruded layer (cap layer). This layer is based on PC resin enriched with a high level of UV absorbers. The recommended layer thickness takes into consideration the layer erosion over the service life and the UV additive optical density, ensuring that no harmful UV light will penetrate the cap layer and damage the unprotected polycarbonate. This product is specifically designed for MW sheets, and it offers improved plate-out performance.

KAFRIT UVA 03650 LD is a UV absorber that effectively blocks UV radiation up to 380 nm. It functions as both an UV absorber and a UV protector, providing enhanced protection against harmful UV rays. The product is designed to be used with carrier materials like polyethylene (PE) and resin-based compounds. Notably, it features UV resistance and excellent UV absorbing properties, making it a reliable choice for applications requiring UV protection. Additionally, it boasts an anti-virus effect, further adding to its protective capabilities.

KAFRIT UVA 60J781 PC is a polycarbonate sheet that features a protective UV cap layer. In most cases, PC sheets come with a thin co-extruded layer known as the cap layer. This particular layer is composed of PC resin, enriched with a high concentration of UV absorbers. The recommended thickness of this layer takes into account both its erosion over time during service and the optical density of the UV additive. Consequently, the cap layer ensures that no harmful UV light can penetrate through to the unprotected polycarbonate underneath. This product is primarily designed for use in MW sheets and is particularly well-suited for applications with high linear speed requirements.

KAFRIT ZHFR 07175 LD introduces a zero-halogen flame retardant masterbatch, assuring compliance with standards including FMVSS 302, UL-94, DIN 4102-1, and EN 13501-1. It finds its niche within the building and construction domain, specifically in pipe and plumbing applications. The carrier comprises resin-based polyethylene (PE). It is categorized under the product families of additive masterbatches and flame retardants.

KAFRIT AF 00S03 LD is an anti-fogging agent product that uses polyethylene (PE) as its carrier. It features good weather stability and is suitable for a wide range of climatic conditions, providing long-lasting antifog properties. It is used in greenhouse and tunnel films for the agriculture and feed markets.

CONSTAB ST 03003 LD is a synergistic combination of antioxidants, improvement of the processing and long-term heat stabilization; rework of trimmings and other film scrap (recycling), and stabilization of the polymers in terms of the shut-down of the extrusion process. Start, stop, and process stabilizer, prolonged processing heat Very suitable when regrind is used. Polyethylene based.

CONSTAB CON-X® AB 664 PE is a product that functions as an anti-blocking agent. It is labelled as recyclable and sustainable and is compatible with linear low-density polyethylene (LLDPE) and high-density polyethylene (HDPE). The carrier used is biaxially oriented polyethylene (bope). The features include high efficiency, freeze resistance, tear resistance, good scratch resistance, excellent seal properties, metallizability, flexibility, recyclability, and clarity.