Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Specific Features
- Additive
- Food-contact
- Good heat stability
Applications & Uses
- Use Level
- 1.5% (For peroxide curing compounds) %, 3% (For addition curing compounds)
- Application Details
ELASTOSIL® AUX STABILIZERs H are used to extend the service life of silicone elastomers at temperatures above 170 °C. The maximum recommended service temperature for use of ELASTOSIL® AUX STABILIZER H3 is 275 °C.
Processing
ELASTOSIL® AUX STABILIZERs H are incorporated into ELASTOSIL® R and R plus high-consistency rubber using standard mixing techniques. Good results are obtained by incorporating the curing agent at the same time. The recommended dosage of ELASTOSIL® AUX STABILIZER H3 is 1,5 % for peroxide curing compounds and 3 % for addition curing compounds.
Properties
- Physical Form
- Properties
- Paste character, ELASTOSIL® AUX STABILIZER H3 can easily be incorporated into ELASTOSIL® R and R plus mixtures on two-roll mills.
- No impairment of ELASTOSIL® R and R plus grades when dosage recommendations are observed.
- Compatible with curing agents ELASTOSIL® AUX CURING AGENT C1 and C6 as well as ELASTOSIL® AUX BATCH PT 1 and PT 2.
- ELASTOSIL® AUX STABILIZER H3 is incompatible with ELASTOSIL® AUX CURING AGENT E.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 1 kg carton and 20 kg cardboard box.
Storage & Handling
- Storage Information
Please store the cardboard boxes in a dry and cool place; not exceeding temperatures >30°C for longer periods of time. Already opened boxes should be tightly closed again to avoid any contamination and sunlight exposure.