Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Specific Features
- Additive
- Food-contact
- Medical
Applications & Uses
- Plastics & Elastomers End Uses
- Use Level
- 1 - 4 %
- Application Details
ELASTOSIL® AUX FL NON-HEALING is suitable for use as an additive for the manufacture of silicone food contact materials and articles in compliance with BfR XV and FDA 21 CFR §177.2600 under observance of any given limitations on extractable and volatile substances. A statement regarding biocompatibility is available on request.
Processing
Dosing of 1-4 % of ELASTOSIL® AUX FL NON HEALING via the color line of the dosing unit is recommended. It must be thoroughly stirred before use. This is also necessary if there has been a long interruption in production.
Properties
- Physical Form
- Typical Properties
- Properties
ELASTOSIL® AUX FL NON-HEALING can be used to prevent self-healing issues and other sticking phenomena. It is readyto-use after brief stirring before use.
- Note
Conditions Density Measurement: 15 min / 100°C evacuated, without press.
Value | Units | Test Method / Conditions | |
Density | 1.41 | g/cm³ | DIN EN ISO 1183-1 A |
Dynamic Viscosity (Shear rate 1 s⁻¹) | 365000 | mPa·s | DIN EN ISO 3219 |
Dynamic Viscosity (Shear rate 10 s⁻¹) | 84000 | mPa·s | DIN EN ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg pail and 1kg tin.