Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,838 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Sultron® PSU
Polymer Name:
Polysulfone (PSU)
Physical Form:
Plates
Features:
Steam Resistant, Good Mechanical Properties, Salt Water/Spray Resistant, Acid Resistant, High Tolerance, Odorless, Radiation Resistant, Detergent Resistant, Good Electrical Properties, Chemical Resistant, Translucent, Hot Water Resistant, High Temperature Resistance, Good Thermal Stability
Density:
1240.0 - 1240.0 kg/m³
Tensile Modulus:
2850.0 - 2850.0 MPa
Color:
Yellow
Sultron® Polysulfone PSU is a versatile and reliable thermoplastic material that offers a combination of excellent mechanical, thermal, and electrical properties. With its ability to withstand high temperatures and resist a wide range of chemicals, Sultron® PSU is the ideal solution for applications that demand the highest level of performance and durability. Features: Translucent material with excellent mechanical, thermal, and electrical properties Often replaces polycarbonate in applications requiring higher temperature resistance and improved chemical resistance Outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water, and steam Benefits: Broad temperature range capability makes Sultron® PSU suitable for a wide range of applications Good thermal and electrical insulation characteristics ensure consistent performance in demanding environments Hydrolysis resistant and radiation stable, making it a reliable choice for analytical instrumentation, medical devices, and semiconductor process equipment components Applications: Analytical instrumentation Medical devices Semiconductor process equipment components Any application that demands high temperature resistance and chemical resistance.
Mitsubishi Chemical Group Corporation
Nylatron® 101 PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Stiffness, Heat Stabilized, Good Mechanical Properties, High Melting Point, Wear Resistant, High Strength, Excellent Mechanical Strength, Excellent Toughness, Good Electrical Properties
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3550.0 - 3550.0 MPa
Nylatron® 101 Polyamide PA66 and Ertalon® 66 SA Polyamide PA66 - the ultimate solution for applications that require a combination of strength and toughness. These unmodified shapes are characterized by their superior mechanical strength, stiffness, and wear resistance, making them ideal for a wide range of industrial applications.Features:High mechanical strength, stiffness, and hardnessGood fatigue resistance, sliding properties and machinabilityHigh mechanical damping abilityExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Benefits:With Nylatron® 101 PA66 and Ertalon® 66 SA PA66, you can be sure that your components will withstand even the most demanding of conditions.The superior strength and toughness of these materials ensures that they can handle heavy loads and high-stress applications with ease.The excellent wear resistance and sliding properties of these materials make them ideal for use in gears, bearings, bushings, and other moving parts.Their good electrical insulating properties and resistance to high energy radiation make them suitable for use in electrical equipment and machinery.Applications:Screw machined electrical insulatorsBushings, bearings, gears, roller wheels, star wheels, and sealsFood processing and packaging industry (FDA and EU food contact compliant composition)Suitable for machining on automatic lathes
Mitsubishi Chemical Group Corporation
Proteus® LSG HS PP
Polymer Name:
Polypropylene (unspecified)
Physical Form:
Plates, Rods
Features:
High Purity, Heat Stabilized, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, High Heat Deflection Temperature, Steam Sterilizable, Ethylene Oxide Sterilizable, Dimensional Stability, Autoclave Sterilizable, Good Solvent Resistance, X-Ray Sterilizable
Density:
920.0 - 920.0 kg/m³
Tensile Modulus:
1800.0 - 1800.0 MPa
Color:
White, Black
Proteus® LSG HS PP is a product available in the form of plates and rods, making it suitable for various applications. This material possesses several key features, including X-ray sterilizability, autoclave sterilizability, life science grade, gamma sterilizability, good solvent resistance, heat stabilization, high heat deflection temperature, high purity, steam sterilizability, plasma gas sterilizability, dimensional stability, ethylene oxide sterilizability, and biocompatibility. It comes in the colors white and black and finds applications in medical devices and assemblies, as well as surgical instruments and trays in the medical field.
Mitsubishi Chemical Group Corporation
Zeniva® ZA-500 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Parts & Shapes, Plates, Rods
Features:
High Fatigue Resistance, X-Ray Transparent, Creep Resistant, Low Stress Shielding, Excellent Stiffness, High Loading Capacity, High Strength, Excellent Toughness, High Performance, Dimensional Stability, High Strain Capability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Zeniva® ZA-500 PEEK is a high-performance specialty polymer known for its remarkable strength, advanced stiffness, and exceptional toughness. Specifically designed for structural, load-bearing implantable medical devices, this bio-stable plastic offers excellent fatigue and creep resistance, ensuring durability under continuous strain and repeated loading. In comparison to metals, it presents advantages such as reduced stress shielding, absence of heavy metal allergies or ion erosion, and radiolucent properties for interference-free X-ray and CT scanning procedures.
Mitsubishi Chemical Group Corporation
Duratron® T4503 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Strength, High Tolerance, Creep Resistant, Odorless, Low Thermal Expansion, Thermally Insulating, Dimensional Stability
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
3450.0 - 3450.0 MPa
Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel
Mitsubishi Chemical Group Corporation
Acetron® H POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates, Rods
Features:
High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
Mitsubishi Chemical Group Corporation
Ertalon® 6 XAU+ PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Tube, Plates
Features:
Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, High Degree of Crystallinity, High Density, X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, High Temperature Application, Heat Stabilized, Wear Resistant, Excellent Mechanical Strength, Improved Wear
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Ertalon® 6 XAU+ Polyamide PA6 is a polyamide PA6 material that is heat-stabilized and boasts a dense and highly crystalline structure. This material offers superior heat aging performance in air, making it a reliable choice for bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of time.Features:Heat-stabilizedHighly dense, crystalline structureSuperior heat aging performance in airBenefits:Reliable wear resistance and performance at service temperatures over 60°C (140°F)Ideal for use in bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of timeApplications:Bearings and other mechanical parts in high temperature environmentsIndustrial machinery and equipmentAutomotive and transportation industriesOther applications where heat and wear resistance are critical factors.
Mitsubishi Chemical Group Corporation
Ertalon® 66 GF30 PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Plates, Rods
Features:
Wear Resistant, High Strength, Creep Resistant, Excellent Stiffness, Excellent Toughness, Heat Stabilized, Good Electrical Properties, Good Mechanical Properties, Dimensional Stability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
5000.0 - 5000.0 MPa
Ertalon® 66 GF30 / Nylatron® GF30 is a 30% glass fiber-reinforced and heat-stabilized polyamide PA66. This material offers superior strength, stiffness, creep resistance, and dimensional stability, while also maintaining excellent wear resistance properties.Features:Increased strength and stiffnessExcellent creep resistanceDimensional stabilityGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiationGood machinabilityBenefits:Can withstand high loads and temperaturesIdeal for sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels and insulatorsCan be used in various industries such as pharmaceutical, biotechnology, medical and processing markets.Applications:Sleeve and slide bearingsWear padsRollersPulleysScrapersGear wheelsSprocketsStar wheelsInsulators.
Mitsubishi Chemical Group Corporation
Ertacetal® C LQ POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, Creep Resistant, Excellent Stiffness, Enhanced Physical Properties, High Thermo-Oxidative Stability, Laser Markable, Hydrolysis Resistant, Wear Resistant, Excellent Mechanical Strength, Excellent Dielectric Properties, Alkali Resistant, Low Water Absorption, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Color:
White
Ertacetal® C LQ - the ultimate solution for laser technology applications. Made from Polyoxymethylene (POM-C), this specialized grade is specifically designed to show markings with common laser technologies such as IR-YAG and UV-YAG. Unlike standard POM-C, which only experiences burning but no visible dark marking, Ertacetal® C LQ POM-C offers a bright-white, less transparent color that makes it perfect for laser marking, engraving, and cutting applications.Features:Bright-white, less transparent color for improved laser marking visibilityIdentical physical properties and machinability as standard Ertacetal® C natural POM-CProcessed by extrusion technology for consistent, high-quality performanceBenefits:Provides clear and precise markings with common laser technologiesCan be used in a wide range of laser technology applications such as engraving, cutting and markingHigh-quality and consistent performanceApplications:Laser technology applications such as engraving, cutting and markingIndustrial manufacturing and production processesMedical and diagnostic equipmentElectrical and electronic components
Mitsubishi Chemical Group Corporation
Nylatron® NSM PA6
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Wear Resistant, High Loading Absorption Capability, Self Lubricating, Lubricated
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® NSM Polyamide PA66 is a high-performance thermoplastic that is designed to provide exceptional wear resistance and long-term durability in a wide range of industrial applications. This solid lubricant-filled, proprietary cast nylon formulation offers superior self-lubricating properties, outstanding friction behavior, maximum wear resistance, and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades.Features:The most wear-resistant thermoplastic availableSelf-lubricating with outstanding friction behaviorDynamic load-bearing capacity up to 5x higher than standard cast nylonsService life up to 10x longer than standard cast nylonsBenefits:Provides exceptional wear resistance and long-term durabilityIdeal for high-velocity applications requiring larger geometriesSuitable for a wide range of industrial applicationsApplications:BearingsGearsWear padsPulleysSheavesBushingsValve seatsSealsNylatron® NSM Polyamide PA66 is an ideal solution for industrial applications in the conveying and processing industries and other applications that require a high-performance thermoplastic material with superior wear resistance. This grade is often used as a solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats, and seals, and has the ability to last up to 10 times longer than standard nylon grades, making it a perfect choice for high-velocity, unlubricated moving parts requiring larger geometries.
Mitsubishi Chemical Group Corporation
Duratron® U1000 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Rods
Features:
Food Contact Acceptable, Heat Resistance, Flame Retardant, High Strength, Excellent Dielectric Properties, Amorphous, High Tolerance, Odorless, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant
Density:
1300.0 - 1300.0 kg/m³
Tensile Modulus:
6000.0 - 6000.0 MPa
Color:
Transparent, Amber
Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.
Mitsubishi Chemical Group Corporation
Duratron® CU60 PBI
Polymer Name:
Polybenzimidazole (PBI)
Physical Form:
Tube, Plates, Rods
Features:
Wear Resistant, High Tolerance, High Loading Absorption Capability, Odorless, Heat Resistance, Thermally Insulating, Good Mechanical Properties
Density:
1300.0 - 1300.0 kg/m³
Tensile Modulus:
6000.0 - 6000.0 MPa
Color:
Black
Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".
Mitsubishi Chemical Group Corporation
Duratron® T5530 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Rigidity, Good Stiffness, Creep Resistant, Temperature Resistance, Low Thermal Expansion, High Tolerance, High Loading Absorption Capability, Odorless, Good Electrical Properties, Dimensional Stability
Density:
1600.0 - 1600.0 kg/m³
Tensile Modulus:
6892.0 - 6892.0 MPa
Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.
Mitsubishi Chemical Group Corporation
Ertalon® LFX PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Excellent Stiffness, Lubricated, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.
Mitsubishi Chemical Group Corporation
Acetron® AF Blend POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Rods, Tube, Plates
Features:
Excellent Stiffness, Lubricated, Good Machinability, Low Moisture Absorption, Low Coefficient of Friction, Wear Resistant, High Strength, Improved Wear
Density:
1500.0 - 1500.0 kg/m³
Tensile Modulus:
3100.0 - 3100.0 MPa
Acetron® AF Blend POM-H - the ultimate solution for enhanced wear resistance in conveying and material handling applications. Made from PTFE-filled Homopolymer, Acetron® AF offers a unique combination of properties that make it stand out from other acetal grades. With a low coefficient of friction and great wear performance in wet environments, this material is perfect for bushings, bearings, electrical components, and rollers.Features:Enhanced wear resistanceLow coefficient of frictionGreat wear performance in wet environmentsLow moisture absorptionBenefits:Operates at higher speeds with reduced wearDimensional stability even in wet environmentsSuitable for food-contact applicationsApplications:Conveying and material handling environmentsBushings, bearings, electrical components, and rollers.
Mitsubishi Chemical Group Corporation
Duratron® PI D7015G
Polymer Name:
Polyimide (PI)
Physical Form:
Rods, Tube, Plates
Features:
Temperature Resistance, Lubricated, Bearing Grade, Low Coefficient of Friction, Wear Resistant, High Tolerance
Density:
1460.0 - 1460.0 kg/m³
Tensile Modulus:
4200.0 - 4200.0 MPa
Color:
Black
Duratron® D7015G PI Polyimide is a high-performance bearing grade material that offers exceptional temperature and wear resistance. With a low coefficient of friction, this material is ideal for use in applications where high loads and speeds are a critical factor.Features:15% graphite added for long wear and frictionSuperior temperature and wear resistanceLow coefficient of frictionMaintains performance abilities with or without lubricationBenefits:Excellent choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factorProvides long-lasting performance in harsh environmentsLow maintenance and long-lasting partsApplications:Bearings and bushings in high-temperature environmentsSeals for high-speed or high-load applicationsMachine parts and components in harsh environments where temperature and wear resistance are needed.
Mitsubishi Chemical Group Corporation
Duratron® T4501 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
Creep Resistant, Low Thermal Expansion, Good Compressive Strength, Wear Resistant, High Tolerance, Odorless, Dimensional Stability, Chemical Resistant, Good Thermal Stability
Density:
1450.0 - 1450.0 kg/m³
Tensile Modulus:
5500.0 - 5500.0 MPa
Color:
Black
Duratron® T4501 PAI Polyamide-imide is a high-performance plastic known for its exceptional compressive strength and excellent wear resistance. This grade is ideal for general purpose wear and friction applications, and is able to endure harsh thermal, chemical, and stress conditions.Features:High compressive strengthExcellent wear resistanceAble to endure harsh thermal, chemical, and stress conditionsSimilar in composition to Duratron® T4301 PAIAvailable in larger shapes or componentsBenefits:Can carry more loadReliable solution for general purpose wear and friction applicationsSuitable for a wide range of applications that require high strength and durabilityApplications:General purpose wear and friction partsLarge shapes and componentsApplications that require high strength and durability such as industrial machinery, automotive and aerospace.
Mitsubishi Chemical Group Corporation
Nylatron® GF30 PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Creep Resistant, Excellent Stiffness, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Toughness, Good Electrical Properties, Dimensional Stability
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
5000.0 - 5000.0 MPa
Nylatron® GF30 and Ertalon® 66 GF30 - the ultimate solution for high-performance industrial applications. Our heat-stabilized, 30% glass fiber-reinforced polyamide PA66 offers a unique combination of increased strength, stiffness, creep resistance, and dimensional stability while maintaining its exceptional wear resistance properties.Features:High mechanical strength, stiffness, hardness and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Ideal for sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulatorsCan withstand high maximum service temperaturesOffers lower maintenance costs and longer service lifeEasy to machineApplications:Sleeve and slide bearingsWear padsRollersPulleysScrapersGear wheelsSprocketsStar wheelsInsulatorsUpgrade your industrial components with Nylatron® GF30 and Ertalon® 66 GF30 for improved strength, durability, and performance in even the toughest of environments."
Mitsubishi Chemical Group Corporation
Ketron® 1000 IM PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Tube, Sheets, Rods
Features:
Wear Resistant, Good Thermal Stability, High Tolerance, Ductile, Good Compressive Strength, Chemical Resistant
Tensile Modulus:
4134.0 - 4134.0 MPa
Ketron® 1000 Injection Molded (IM) Polyetheretherketone PEEK shapes are the perfect solution for applications that require excellent chemical, corrosion and wear resistance across a wide range of operating temperatures. These advanced engineering plastics are ideal for use in the oil and gas industry, where they are often specified for back-up seal rings and v-seals. Key features: Very high maximum allowable service temperature in air (250 °C continuously, up to 310 °C for short periods of time) High mechanical strength, stiffness and creep resistance, even at elevated temperatures Excellent chemical and hydrolysis resistance Excellent wear and frictional behavior Very good dimensional stability Excellent resistance to high energy radiation (gamma- and X-rays) Inherent low flammability and very low levels of smoke evolution during combustion Benefits: Can withstand harsh environments and high temperatures Exceptional toughness and impact strength Sterilizable by all conventional sterilization methods Complies with EU and US regulations for food contact Available in "Food Grade" natural and black color options Applications: Back-up seal rings and v-seals in the oil and gas industry Bearings, bushings and gears in food processing equipment High temperature seals, gaskets and washers in chemical processing equipment Medical device components and implants Aerospace and automotive components
Mitsubishi Chemical Group Corporation
Ketron® 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Tube, Plates, Rods
Features:
Ductile, General Purpose, Steam Resistant, Excellent Aesthetics, Wear Resistant, High Tolerance, High Elongation, Excellent Toughness, High Performance, Chemical Resistant
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Tan, Black
Ketron® 1000 PEEK is a high-performance polymer that offers excellent mechanical properties and chemical resistance. It is widely used in a variety of applications where high strength and stiffness, low friction, and excellent dimensional stability are required. This material is ideal for instrument and seal components, where its high elongation and toughness make it an excellent choice. Its non-toxic and biocompatible properties make it suitable for use in medical and food processing applications. Key features: High strength and stiffness Low friction Excellent dimensional stability High elongation and toughness EU 10/2011 and FDA compliant Benefits: Improved performance and durability of components Increased resistance to chemicals and high temperatures Enhanced biocompatibility and safety in medical and food processing applications Greater design flexibility and compatibility with a wide range of applications and industries Application: Structural parts: Ketron® PEEK is often used for structural components that are subject to high temperatures and chemical exposure. For example, it is commonly used for vacuum wand handles in semiconductor manufacturing. Bushings, bearings, seals, and back-up rings: Ketron® PEEK is an excellent choice for components that are subject to wear and tear. Its low coefficient of friction and high strength make it suitable for use in a wide range of applications, from aircraft to oil field drilling. Ketron® 1000 PEEK is available in a range of shapes and sizes, making it easy to incorporate into your designs. It is a versatile and reliable material that can help improve the performance and longevity of your products.
Mitsubishi Chemical Group Corporation
Semitron® MDS 100
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
High Rigidity, Good Stability, Low Moisture Absorption, High Strength, High Tolerance, Odorless, Moisture Resistant, High Performance, Good Machinability, Dimensional Stability, High Stiffness
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
11000.0 - 11000.0 MPa
Color:
Grey
Semitron® MDS 100 modified Polyetheretherketone PEEK shapes offer a remarkable combination of strength, stiffness, and stability. This grade in particular was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron® MDS 100 components are often used as test sockets, nests, and fixtures in test and package equipment throughout the semiconductor and electronics industry.Features:Remarkable combination of strength, stiffness, and stabilityDeveloped for use in uncontrolled application environments where a high level of precision is requiredMoisture absorption of 0.10% at 24 hrs. (per ASTM D570)Thermal performance to 210 °C (410 °F)Flexural modulus > 1,400,000 psiBenefits:Ideal for test sockets, nests and fixtures in test and package equipmentSuitable for use in semiconductor and electronics industryCan withstand harsh, uncontrolled environmentsLow moisture absorption ensures dimensional stabilityHigh thermal performance and flexural modulus ensures durability and precisionApplications:Test sockets, nests and fixtures in test and package equipmentOther applications in the semiconductor and electronics industry that require a high level of precision and stability in uncontrolled environments.
Mitsubishi Chemical Group Corporation
Fluorosint® 207 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
Low Permeability, Food Contact Acceptable, Creep Resistant, Low Coefficient of Friction, High Tolerance, Anti-Wear Properties, Odorless, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant, Good Sliding Properties
Density:
2300.0 - 2300.0 kg/m³
Tensile Modulus:
1450.0 - 1450.0 MPa
Color:
White
Fluorosint® 207 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added food contact compliance and unique combination of dimensional stability and creep resistance. This material is designed to excel in demanding applications where high performance, reliability and food contact compliance are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceFood Contact Compliant (FDA): safe for use in food and pharmaceutical applicationsHigh dimensional stability and creep resistance: ensures consistent performance over timePTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:Low coefficient of friction, making it ideal for aggressive service bearing and bushing applicationsFood Contact Compliance (FDA), allowing for use in food and pharmaceutical industriesHigh dimensional stability and creep resistance, ensuring consistent performance over timeEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Food and pharmaceutical applications where FDA compliance is requiredLow friction bearing and bushing applications in aggressive service environmentsLower pressure seats and seals, where virgin PTFE failsChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires low friction and dimensional stability in harsh environments.Fluorosint® 207 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added food contact compliance and unique properties, Fluorosint® 207 is an excellent choice for applications in food, pharmaceutical and chemical processing industries.
Mitsubishi Chemical Group Corporation
Fluorosint® HPV PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Plates
Features:
High Performance, Bearing Grade, High Viscosity, High Tolerance, High Loading Absorption Capability, Food Contact Acceptable, Anti-Wear Properties, Odorless
Density:
2060.0 - 2060.0 kg/m³
Tensile Modulus:
1200.0 - 1200.0 MPa
Color:
Tan
Fluorosint® HPV is an advanced polymer material that combines the excellent chemical resistance and low friction properties of PTFE (polytetrafluoroethylene) with added strength, stiffness, and wear resistance, making it ideal for high-performance bearing applications.Key features:High PV (pressure-velocity) and low “k” or wear factor: Optimized for high performance and durability in bearing applicationsFDA Compliant: Suitable for use in food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speedsFDA Compliant : Suitable for applications where food contact compliance may be requiredBenefits:High performance and durability in bearing applications: Enables equipment to run efficiently and safelyFDA Compliance: Provides new design options for food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speeds, making it ideal for demanding applicationsImproved reliability and safety in critical applications.Application:Bearing applications where high PV and low “k” or wear factor are neededFood processing and pharmaceutical applications where FDA compliance is requiredAny application that requires high performance and durability in harsh environmentsFluorosint® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's FDA compliant, making it suitable for food processing and pharmaceutical applications, it's ideal for high-performance bearing applications and it's available in custom shapes for efficient production. With its excellent chemical resistance, low friction, and high performance in harsh environments, Fluorosint® HPV is an excellent choice for equipment manufacturers looking to improve the performance and safety of their products.
Mitsubishi Chemical Group Corporation
Duratron® LSG PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Biocompatible, Good Mechanical Properties, Gamma Sterilizable, Hydrolysis Resistant, Life Science Grade, Plasma Gas Sterilizable, Steam Sterilizable, Ethylene Oxide Sterilizable, Excellent Thermal Properties, High Performance, Heat Sterilizable, Good Electrical Properties, Chemical Resistant, X-Ray Sterilizable
Density:
1280.0 - 1280.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Color:
Translucent, Amber, Black, Blue
Duratron® LSG PEI is a product available in the form of plates and rods and offers a range of valuable features such as good electrical properties, ethylene oxide sterilizability, biocompatibility, hydrolysis resistance, X-ray sterilizability, life science grade, gamma sterilizability, good mechanical properties, food contact acceptability, steam sterilizability, high performance, heat sterilizability, plasma gas sterilizability, excellent thermal properties, and chemical resistance. It comes in a variety of colors including black, translucent, blue, and amber. This versatile material is suitable for a wide range of applications, including implants and prosthetics, medical devices and assemblies, and food and beverage packaging.
Mitsubishi Chemical Group Corporation
Ertacetal® C ELS POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, High Hardness, Exceptional Resilience, Electrically Conductive, Creep Resistant, Excellent Stiffness, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Excellent Dielectric Properties, Low Water Absorption, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
1500.0 - 1500.0 MPa
Ertacetal® C ELS Polyoxymethylene POM-C shapes exhibit excellent electrical conductivity qualities, low moisture absorption, high strength and stiffness, and great machinability capabilities. This grade in particular is recommended for use in electrical and explosion sensitive applications, and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Features:Excellent electrical conductivityLow moisture absorptionHigh strength and stiffnessGreat machinabilityBenefits:Ertacetal® C ELS is the perfect solution for applications that require excellent electrical conductivity, low moisture absorption, and high strength and stiffness.Its great machinability makes it easy to work with, ensuring precise and accurate production.Applications:Ertacetal® C ELS is ideal for use in electrical and explosion sensitive applications and complies with REACH (EC) no 1907/2006 and UL 94 HB flame rating requirements.Its excellent electrical conductivity makes it perfect for use in electrical equipment, and its low moisture absorption ensures that it can be used in harsh environments without any issues.Its high strength and stiffness make it suitable for use in applications where precision and accuracy is required.
Mitsubishi Chemical Group Corporation
Techtron® PSGF PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Creep Resistant, Dimensional Stability, High Stiffness, Good Sliding Properties, High Tolerance
Density:
1660.0 - 1660.0 kg/m³
Tensile Modulus:
7250.0 - 7250.0 MPa
Color:
Black
Techtron® PSGF PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and stiffness of glass fiber reinforcement. This compression-molded material is designed to excel in structural applications where dimensional stability and resistance to harsh environments are required.Key features:Extreme dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerances.Chemical and corrosion resistance: suitable for use in demanding environments and harsh chemicals.Glass fiber reinforced: increased strength and stiffness, ideal for structural componentsHigh temperature resistance: can withstand high temperatures and maintain stability.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved strength and stiffnessApplications:Structural components such as pump housings, valves, and compressors in the oil and gas industryAutomotive and aerospace components as it can withstand high temperatures.Industrial and chemical processing applications where chemical resistance and dimensional stability is needed.General structural components where increased strength and stiffness is neededTechtron® PSGF is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Fluorosint® 135 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Tube, Plates
Features:
High Performance, Good Mechanical Properties, High Stiffness, Low Coefficient of Friction, High Strength, High Tolerance, Anti-Wear Properties
Density:
1890.0 - 1890.0 kg/m³
Tensile Modulus:
1.238 - 1.238 MPa
Color:
Black
Fluorosint® 135 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added low coefficient of friction, strength, stiffness and high pressure velocity capabilities. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceHigh strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Low coefficient of friction, making it ideal for seals, bearings, and washer applicationsImproved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Low friction seals, bearings and washer applicationsHigh-performance wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® 135 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.
Mitsubishi Chemical Group Corporation
Semitron® ESd 420 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Rods, Tube, Plates
Features:
High Stiffness, ESD Protection, High Strength, High Tolerance, Static-Dissipative, Odorless
Density:
1320.0 - 1320.0 kg/m³
Tensile Modulus:
3850.0 - 3850.0 MPa
Color:
Black
Semitron® ESd 420 PEI Polyetherimide electro static dissipative shapes exhibit high strength and stiffness, and excellent resistivity in the 10E5 to 10E8 ohms per square range. This grade in particular excels in high temperature environments, making it ideal for extreme structural applications in semiconductor and electronics markets.Features:High strength and stiffnessExcellent resistivity in the 10E5 to 10E8 ohms per square rangeSuitable for high temperature environmentsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for extreme structural applications in semiconductor and electronics marketsOnly truly dissipative plastic product for use in high temperature applicationsCan withstand harsh conditions while maintaining its electrostatic propertiesApplications:Semiconductor and electronics industryHigh temperature structural applications such as in electronic components and equipment, where electrostatic discharge (ESD) protection is necessary.Can be used in electronic packaging, automotive, aerospace, and other industries where static control is critical.
Mitsubishi Chemical Group Corporation
Duratron® U2100 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Low Thermal Expansion, Low Odor, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio, High Tensile Strength, High Rigidity
Density:
1340.0 - 1340.0 kg/m³
Tensile Modulus:
4135.2 - 4135.2 MPa
Color:
Brown
Duratron® U2100 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, and a low Coefficient of Linear Thermal Expansion. With 10% glass-reinforcement, Duratron® U2100 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:10% glass-reinforced for great rigidity and dimensional stabilityLow Coefficient of Linear Thermal ExpansionExcellent strength-to-weight ratio and tensile strengthBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability and low thermal expansion is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsApplications that require dimensional stability and low thermal expansionDuratron® U2100 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments, Duratron® U2100 PEI is the ideal solution. Try it today and experience the difference for yourself!
Mitsubishi Chemical Group Corporation
Nylatron® MC® 907 PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Heat Aging Resistant, High Hardness, Food Contact Acceptable, Creep Resistant, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Toughness, Good Electrical Properties, Good Machinability
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Nylatron® MC 907 PA6 and Ertalon® 6PLA PA6 are unmodified cast nylon 6 grades that offer the highest strength and hardness of all nylon 6 grades. They exhibit great creep and wear resistance, heat aging properties, and machinability capabilities, making them ideal for the food processing and packaging industry.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma- and X-rays)Good machinabilityBenefits:High strength and hardness for maximum durability and longevityExcellent creep and wear resistance for minimal maintenance and replacement costsHeat aging properties ensure long-term performance in high-temperature environmentsGood machinability for easy customization and shapingFDA and EU food contact compliant composition for safe and hygienic use in food processing and packaging applicationsApplications:GearsRollersWheelsBearingsConveyor wear partsAnd more in the food processing and packaging industry.
Mitsubishi Chemical Group Corporation
Sultron® LSG FG R5100 PPSU
Polymer Name:
Polyphenylsulfone (PPSU)
Physical Form:
Plates, Rods
Features:
High Ductility, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Acid Resistant, Alkali Resistant, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Excellent Hydrolysis Resistance, Excellent Sterilization Resistance, X-Ray Sterilizable
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
2450.0 - 2450.0 MPa
Color:
Black
Sultron® LSG FG R5100 PPSU is a product available in the form of plates and rods, and it possesses various important features. These include being ethylene oxide sterilizable, biocompatible, excellent sterilization resistance, X-ray sterilizable, alkali resistant, life science grade, gamma sterilizable, steam sterilizable, acid resistant, heat sterilizable, plasma gas sterilizable, excellent hydrolysis resistance, and high ductility. It comes in the color black and finds applications in equipment and parts, implants and prosthetics, medical devices and assemblies, surgical instruments, and trays, as well as connectors in the medical field.
Mitsubishi Chemical Group Corporation
Altron™ LSG PC
Polymer Name:
Polycarbonate (PC)
Physical Form:
Plates, Rods
Features:
No Animal Derived Components, Biocompatible, Gamma Sterilizable, Hydrocarbon Resistant, Life Science Grade, Plasma Gas Sterilizable, Excellent Dielectric Properties, Acid Resistant, Alkali Resistant, Ethylene Oxide Sterilizable, Odorless, Excellent Toughness, Impact Resistance, Hot Water Resistant, X-Ray Sterilizable
Density:
1200.0 - 1200.0 kg/m³
Tensile Modulus:
2400.0 - 2400.0 MPa
Color:
Transparent
Altron™ LSG PC is a polymer made from polycarbonate (PC) and is available in the form of plates and rods. It boasts a wide range of features, including hydrocarbon resistance, ethylene oxide sterilizability, impact resistance, hot water resistance, biocompatibility, X-ray sterilizability, alkali resistance, excellent toughness, life science grade, no animal-derived components, gamma sterilizability, odorlessness, excellent dielectric properties, and acid resistance. Transparent in color, it finds applications in medical devices and assemblies, as well as in housings and enclosures, including those for medical device housings, analyzers, and bioreactor equipment.
Mitsubishi Chemical Group Corporation
Duratron® PEI U2300
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
High Tensile Strength, High Rigidity, Food Contact Acceptable, Low Thermal Expansion, Heat Resistance, Flame Retardant, Low Odor, High Strength, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
5513.6 - 5513.6 MPa
Color:
Brown
Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!
Mitsubishi Chemical Group Corporation
Nylatron® 66 SA FR PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Rods, Plates
Features:
Flame Retardant, High Limiting Pressure Velocity, Low Temperature Impact Resistance, Low Moisture Absorption
Density:
1160.0 - 1160.0 kg/m³
Tensile Modulus:
3900.0 - 3900.0 MPa
Nylatron® SA Flame Retardant (FR) Polyamide PA66 shapes were specifically developed to meet the requirements of the plastic flammability test, as outlined in UL 94 and EN 45545-2 regulations. This grade of Nylatron® is designed for applications within the transportation and railway markets, and is ideal for use in cable holders, clamps, channels, and connections/sockets.Features:Universally flame retardantFully compliant with REACHLow moisture absorptionAbsence of heavy metals and halogens – RoHS compliantBenefits:Meets V-0 criteria from a thickness of 1mmCompliant with the EN 45545-2 regulation, a standard specific to railway applicationsSuitable for use in transportation and railway marketsApplications:Cable holdersClampsChannelsConnections / socketsAdditional Note: Parts manufactured from Nylatron 66SA FR can be disposed according to WEEE.
Mitsubishi Chemical Group Corporation
Nylatron® SLG PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates, Rods
Features:
High Rigidity, Food Contact Acceptable, Lubricated, Heat Stabilized, Good Mechanical Properties, Low Coefficient of Friction, Wear Resistant, High Strength, Excellent Mechanical Strength, Self Lubricating, Excellent Toughness, Good Electrical Properties, Good Sliding Properties, Service Life Extension
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® SLG Polyamide PA6 oil-filled shapes are the perfect solution for industrial applications that require low coefficient of friction, high mechanical strength and rigidity, and outstanding wear resistance. Developed specifically for non-lubricated, highly loaded, and slowly moving parts, these shapes offer a number of benefits over conventional cast nylon grades.Features:Broadest size range availabilityExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessInternally lubricated and heat stabilizedBenefits:Low coefficient of friction and sliding propertiesHigh mechanical strength and rigidityOutstanding wear resistanceLonger service life and lower maintenance costs compared to conventional cast nylon gradesApplications:Ideal for use in industrial environmentsSuitable for non-lubricated, highly loaded, and slowly moving parts such as gears, bearings, bushings, and wear pads.
Mitsubishi Chemical Group Corporation
Nylatron® MC 901 H.S. PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates, Rods
Features:
Good Sliding Properties, Good Thermal Stability, High Rigidity, High Hardness, Heat Stabilized, Good Mechanical Properties, Wear Resistant, High Strength, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Good Electrical Properties, Electrically Insulating
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Color:
Blue
Nylatron® MC 901 Heat Stabilized (HS) Polyamide PA6 shapes are a durable and versatile solution for industrial applications that require long-term thermal stability and high mechanical properties.Features:Long-term thermal stability up to 260° F (126° C)Outstanding mechanical strength, rigidity, hardness, and toughnessGreat sliding properties and wear resistanceSuperior resistance to high-energy radiationExcellent electrical insulationBenefits:Provides reliable performance in high temperature environmentsResists wear and tear in industrial applicationsOffers high resistance to high-energy radiationProvides excellent electrical insulationApplications:Conveyor wear componentsBushingsSheavesWear padsValve seats and sealsCustom parts and gearswheels
Show
36
of 1,838 results
Go to page
1
2
3
4
5
6
7
8
9
10