Products in Thermoset Resins: Impact Resistance

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Esschem MMA - BMA Bead Copolymers are a range of copolymers combining methyl methacrylate (MMA) with butyl methacrylate (BMA).These copolymers offer a versatile solution with varying properties based on the MMA and BMA content. Higher MMA content results in copolymers with elevated glass transition temperatures, melting points, and tensile strengths, making them suitable for applications that require strength and rigidity. Conversely, increased BMA content lowers these properties while enhancing processability and potential flexibility.By adjusting the molecular weight, Esschem can tailor the copolymer structure to achieve specific rigidity requirements. Additionally, controlling the particle size allows for improvements in mechanical strength, with smaller particles offering larger surface area to volume ratios.

Esschem incorporates sustainable plant-based plasticizers into methyl methacrylate MMA bead polymers. These innovative additives are designed to enhance the flexibility and workability of methacrylate-based polymers. By incorporating bio-plasticizers into MMA bead copolymers, the resulting materials exhibit increased flexibility and reduced glass transition temperature, melting points, and tensile strengths.The inclusion of higher molecular weight components contributes to stronger and more heat-resistant materials.Furthermore, the particle size plays a crucial role in surface properties, where smaller particles enhance adhesion while larger particles contribute to robustness and rigidity.

Esschem MMA - IBOMA Bead Copolymers are a range of copolymers that combine methyl methacrylate (MMA) with isobornyl methacrylate (IBOMA).These bead copolymers offer exceptional strength and performance for a wide range of industries. With their high glass transition temperature, melting point, and tensile strength, they provide incredibly strong polymers that meet demanding application requirements.By controlling the molecular weight, Esschem ensures that the copolymer beads exhibit enhanced strength and rigidity. Furthermore, the performance characteristics, including adhesion, can be tailored by optimizing the particle size.

Esschem MMA - AMA Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) with allyl methacrylate (AMA). These copolymers showcase the unique characteristics of AMA as a crosslinker in polymers. With varying MMA and AMA concentrations, Esschem offers a wide range of copolymer beads with different properties. Higher MMA content in the copolymer results in elevated glass transition temperatures, melting points, and tensile strengths, making them ideal for applications requiring high strength and rigidity. On the other hand, increasing the AMA content lowers these properties while enhancing crosslinking and hardness. By adjusting the molecular weight, Esschem can further customize the copolymer's rigidity and crosslinking behavior. The particle size of the beads can also be modified to optimize processing and surface properties, including adhesion characteristics.

Esschem EMA Bead Copolymers are a range of bead polymers synthesized from ethyl methacrylate (EMA) that offers the strength of polymethyl methacrylate (PMMA) with slightly different properties.The copolymers exhibit a slightly lower glass transition temperature, resulting in a softer and more flexible final product compared to PMMA.By controlling the molecular weight, Esschem can customize the heat resistance and strength of the polymer, making it suitable for various applications across multiple industries.The smaller particle size of the beads enhances surface properties like adhesion, while larger particles contribute to a more robust and rigid material.

Esschem EMA - EHMA Bead Copolymers are a unique combination of ethyl methacrylate (EMA) and 2-ethylhexyl methacrylate (EHMA) that offers exceptional properties.The incorporation of 2-EHMA disrupts the polymer chain packing, resulting in lower glass transition temperatures and enhanced low-temperature flexibility, while significantly improving transparency.With variations in molecular weight, Esschem can further enhance the strength and flexibility of these bead copolymers. The smaller particle size of the beads improves processability and has the potential to enhance transparency, while larger particles contribute to a more rigid material.

Esschem MMA - Styrene Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) and styrene. These bead copolymers offer a wide array of properties and applications. With increased MMA content, the resulting materials exhibit remarkable strength and transparency. Conversely, a higher proportion of styrene enhances hydrophobicity, hardness, and impact resistance. The molecular weight plays a crucial role in determining the characteristics of the copolymers. Higher molecular weights, often associated with increased styrene content, yield stronger and more heat-resistant materials. Esschem's ability to manipulate the molecular weight distribution allows for customized properties such as durability, elasticity, and processing ease. Additionally, the particle size of the copolymers influences surface properties and rigidity.

Esschem MMA - HPMA Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) with hydroxypropyl methacrylate (HPMA). These bead copolymers offer exceptional performance and customizable properties for various applications. With increased MMA content, these copolymers exhibit elevated glass transition temperatures, melting points, and tensile strengths, providing enhanced strength and durability. Conversely, higher HPMA content improves adhesion and reduces glass transition temperatures, melting points, and tensile strengths, offering flexibility and tailored characteristics. Esschem further enhances the molecular weight of these copolymers, resulting in more rigid and durable materials. By manipulating the particle size, solubility, dispersion properties, and transparency can be optimized, making them ideal for applications that demand transparency, strength, and toughness.

DAP ID-40 is a general-purpose diallyl ortho-phthalate molding compound filled with Orlon. It is supplied in a granular form and can be easily molded using standard compression or transfer equipment. This type of compound is versatile and suitable for various molding applications.

Cosmic Alkyd 3D36 is a specialized alkyd molding compound that incorporates long glass fibers for enhanced impact resistance and flame retardant properties. Supplied in flake form, it is designed for ease of use and versatility in molding applications. This compound molds readily using standard compression or transfer equipment, and it maintains its performance for up to one year when stored at temperatures of 100°C or below. Its unique blend of properties makes it suitable for applications that require both impact resistance and flame retardancy.

Esschem EMA - EGDMA Bead Copolymers are a versatile combination of ethyl methacrylate (EMA) and ethylene glycol dimethacrylate (EGDMA). With a higher proportion of EMA, these copolymers exhibit enhanced flexibility due to the less bulky ethyl group present in EMA. Conversely, increasing the EGDMA content results in a more crosslinked structure, leading to greater rigidity. The glass transition temperature remains relatively stable regardless of the percentage of each constituent. By precisely controlling the molecular weight, Esschem can optimize the level of crosslinking, resulting in superior mechanical properties such as hardness and tensile strength. Additionally, the particle size can be tailored to influence surface area and reactivity, allowing for further adjustment of the physical properties.

Esschem MMA - EMA Bead Copolymers are a range of bead copolymers combining methyl methacrylate (MMA) with ethyl methacrylate (EMA). These copolymers exhibit high glass transition temperatures, melting points, and tensile strengths, making them ideal for industries that demand strength and rigidity. By increasing the EMA content, the copolymers offer greater flexibility and the potential for enhanced optical properties. This results in lower glass transition temperatures, melting points, and tensile strengths, providing desired flexibility and transparency. Esschem provides control over the molecular weight to further enhance these properties, allowing for a more rigid and robust copolymer or targeting flexibility and transparency as needed. Particle size control enables fine-tuning of processability and adjustment of surface properties, leading to better performance in applications that prioritize transparency.

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

ADEKA™ EPR-1415-1, a cutting-edge epoxy resin and compound polymer, showcases its prowess in the plastics technology field. Boasting exceptional characteristics such as good adhesion and impact resistance, this product ensures not only reliability but also durability in a myriad of applications. Experience the next level of performance and versatility with ADEKA™ EPR-1415-1.

Ultraclear™ 480N-20 by Hapco Inc. is comprised of Polyurethane (unspecified). It is commonly used as Casting Resin for a variety of applications.

Ultraclear™ 480N-60 by Hapco Inc. is comprised of Polyurethane (unspecified). It is commonly used as Casting Resin for a variety of applications.

ebalta MG 425 is processed on a two-component low pressure device. The systems MG 400 / MG 425 / MG 475 are cured with the hardener PUR 19. By mixing MG 425 with MG 400 the E-modulus can variably between 630 – 1550 MPa. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. Release agent – please see category release agent

Polyurethane (PUR) based compound. Glass fibres. Very good noise reduction. Good impact resistance even at low temperature.

XR81842 is a two component, low viscosity, room temperature curing, epoxy system. The product cures to a tough, resilient, semi-flexible casting.

Ultraclear™ 480N-10 by Hapco Inc. is comprised of Polyurethane (unspecified). It is commonly used as Casting Resin for a variety of applications.

Hybtonite® Mix 50/50, CNT modified epoxy resin. It is a low viscosity, solvent free 100 % reactive resin. The system will give increased impact resistance, elongation to break and fatigue compared to any traditional epoxies. It also attaches functional chemical groups covalently to the CNTs. When epoxy resin is cured, these functional groups take part in the polymerization process creating a strong hybrid structure between matrix and CNTs. Due to that nanocarbonepoxy resins possess revolutionary properties compared to the standard epoxy resins. Providing the outstanding performance in numerous composite as well as non-composite bonding applications, nanocarbonepoxy Hybtonite offers ease of use, durability and a consistently high quality. Can be used in marine, automotive industry and in many other industrial applications.

BC 8405 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), BC 8405 offers the user a rationable working time of 15 minutes with parts demoldable in as little as 2 hours. When properly cured, BC 8405 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: mercury free, moderate heat resistance, 1 to 1 mix ratio, turn white upon cure, longer mold life, high impact strength, no objectionable odor, excellent finishing properties, thermoplastic appearance, more parts per day.

BC 8165 is a low viscosity, rapid setting, rigid urethane compound. Similar to BC 8163, however exhibits an 8 to 10 minute working time. This system will cure quickly to a hard, tough, impact resistant casting. BC 8165 is non-sensitive to moisture after cure and will readily bond to itself if stage pours are required. BC 8165 is recommended for thin wall model and prototype applications where a "thermoplastic feel" is desired.

ebalta GH 730/BR is a quite versatile two-components epoxy resin with good castability, curing at room temperature. Due to its easy workability as well as its high strength and low shrinkage there’s a big variety of applications as mouldmaking, toolmaking and in foundries. Moreover the high impact resistance and cast thickness of more than 30 mm make even more applications possible.

BCC Products now offers a revolutionary state-of-the-art machineable foundry plank for today's demanding tooling requirements. MB4000 Red is an extremely tough, high impact Urethane Plank, that can replace aluminum and other metals for many foundry applications.

BC 8400 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), BC 8400 offers the user a 3 minute working time with parts demoldable in as little as 30 minutes. When properly cured, BC 8400 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: mercury free, moderate heat resistance, 1 to 1 mix ratio, turn white upon cure, longer mold life, high impact strength, no objectionable odor, excellent finishing properties, thermoplastic appearance, more parts per day.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

BCC Products now offers a revolutionary state-of-the-art machineable high density board for today's demanding tooling requirements. MB 5000 is an extremely tough, high impact Urethane Plank that can be used for metal forming as well as nickel plating mandrels.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

A white epoxy system with a convenient 1:1 mix ratio by weight and volume. This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.

BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly wear-resistant parts and prototypes. BC8160 can be used to develop thermoplastics type prototypes. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC8160 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.

Ebalta GM 979 is an easy-to-handle-2components-polyurethane casting compound which shows very low adhesive properties compared to molding sand. Due to its high abrasion resistance, GM 979 is especially suitable for foundry patterns, which have to resist to abrasive wear by molded sand. GM 979 even keeps its high mechanical strength when using molding sands with higher temperatures.

DP-11-90 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), DP-11-90 offers the user a 3 minute working time with parts demoldable in as little as 30 minutes. When properly cured, DP-11-90 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: Mercury free High impact strength Moderate heat resistance No objectionable odor 1 to 1 mix ratio Excellent finishing properties Turns tan color upon cure Thermoplastic appearance Longer mold life More parts per day