Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Resin Systems
Resin Systems RS-2297
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2297 is a patented, very high density, filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring x-ray shielding. This material provides greater than 28% of the x-ray shielding of lead metal, and has superior x-ray shielding to the industry standard 30% lead oxide filled “orange†epoxy. This high density material is non-hazardous and meets UL94V-0 requirements.
Eagle Chemicals
USP-EAGLE (GP60-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Hand Lay-Up, Hand Lay-up, Spray Lay-up, Spray Lay-Up
USP-EAGLE (GP60-65) is Unsaturated Polyester resin pre-accelerated, thixotropic and excellent adhesion to acrylic sheetit is used in a spray, hand lay-up and glass fiber reinforced back lamination for sanitary ware.
SACO AEI Polymers
PEXIDAN® HF SX738
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Building Wire Insulation, Cables, Appliance Wire Insulation, Wires
Density:
1400.0 - 1400.0 kg/m³
PEXIDAN® HF SX738 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. This system is designed specifically for the production, by extrusion, of flame retardant halogen free heat shrinkable tubing. The two component system SX738:CM401 combines ease of processing with the ability to achieve a degree of crosslinking compatible with good expansion and contraction.
Eagle Chemicals
USP-EAGLE (RS18-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Cure Method:
Chemical Cure
Processing Methods:
Continuous Lamination, Lamination
USP-EAGLE (RS18-65) is Unsaturated Polyester resin with high clarity, very good transparency as the refractive index of cured resin matches that of E-glass fiberit is used in the manufacturing of roofing sheets by continuous lamination.
Leepoxy Plastics
Leecast 20-73
Polymer Name:
Polyurethane (unspecified)
LEECAST 20-73 is a two-part, reversion resistant, electrical grade room temperature curing potting compound. It is a unique urethane system that contains neither MOCA nor TDI. LEECAST 20-73 is designed to provide excellent dielectric properties over a wide temperature range. It has good low temperature flexibility and is ideally suited for protecting pressure sensitive glass diodes and other electronic devices. Its low viscosity and long pot life make it attractive for penetrating complex modules and for the aggregate casting method of encapsulation and potting. LEECAST 20-73 also features excellent reversion resistance or hydrolytic stability.
Resin Systems
Resin Systems RS-2272
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2272 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material is non-flammable and meets UL94V-0.
SACO AEI Polymers
PEXIDAN® HF SX612ES
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1520.0 - 1520.0 kg/m³
Tensile Strength:
13.0 - 13.0 MPa
PEXIDAN® HF SX612ES pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612ES has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41, with enhanced fire resistance to comply with fire testing on smaller cross sections.
Resin Systems
Resin Systems RS-2200
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
62.01 - 62.01 MPa
RS-2200 is a castable, filled epoxy resin with good overall general properties. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and milk alkalines.
Eagle Chemicals
Eagle Chemicals Polyol SHS 100 C
Polymer Name:
Polyurethane (MDI-based)
Chemical Family:
Polyurethanes (PU)
Polyol SHS 100 C / Cross.101 / ISO.SHS 100 A is Three component PU system suitable for the production of Soft Casual soles.
Resin Systems
Resin Systems RS-3590
Polymer Name:
Polyurethane (unspecified)
Density:
1130.0 - 1130.0 kg/m³
Resin Systems
Resin Systems RS-2242
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
62.01 - 62.01 MPa
RS-2242 is a castable, filled epoxy resin specifically designed for high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL 94/V-0 requirements.
Resin Systems
Resin Systems RS-2240
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS2240 is a castable, filled epoxy resin specifically designed for high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids, and mild alkalines. This material also offers superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
allnex
ALNOVOL® UF 410 RPC
Functions:
Crosslinking Agent, Resin
Chemical Family:
Phenols & Phenolics
ALNOVOL® UF 410 RPC, a carbamic resin on silica, demonstrates compatibility with various synthetic and natural rubbers. Notably, its composition prevents the formation of a clear solution in solvents due to the silica carrier. Primarily functioning as a crosslinking agent and binder, this resin is specifically designed for applications in tires. Its elastomeric functions contribute as a resin within this context.
Resin Systems
Resin Systems RS-2922
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
121.953 - 121.953 MPa
RS-2922 is a 10% class filled version of RS-2920, castable toughened epoxy resin. This material has the look and feel of a thermoplastic and/or urethane but offers higher temperature resistance than cast urethanes. It’s high impact strength makes this material an excellent choice when urethanes are no sufficient to do the job.
Eagle Chemicals
USP-EAGLE (PIP50-60)
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Isophthalics, Polyesters
Cure Method:
Chemical Cure
Processing Methods:
Hand Lay-Up, Filament Winding, Hand Lay-up
USP-EAGLE (PIP50-60) is an Isophthalic based Unsaturated Polyester resin with high mechanical & chemical resistance.
Eagle Chemicals
USP-EAGLE (GP20-62)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Lamination
USP-EAGLE (GP20-62) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color, rigid film, and low viscosityit is used in glass fiber lamination for general purpose applications.
Resin Systems
Resin Systems RS-2244 No Track Epoxy Resin
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
62.01 - 62.01 MPa
RS-2243 is a castable, filled epoxy resin specifically designed for high temperature, high voltage insulator applications. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines. This material has superior arc resistance as compared to standard electrical grade epoxy materials. In addition, this material is non-flammable and meets UL94V-0 requirements.
Leepoxy Plastics
Leecast 30-125
Polymer Name:
Polyurethane (unspecified)
LEECAST 30-125 is a two-component urethane that is mixed and poured at room temperature. LEECAST 30-125 develops full hardness after 24 hours at room temperature to provide an impact, UV and temperature resistant system.
Resin Systems
Resin Systems RS-2287
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
Flexural Strength:
62.01 - 62.01 MPa
RS-2287 is a high density, castable, lead free non-insulating grade filled epoxy resin designed for applications requiring x-ray shielding. This material provides 50% of the x-ray shielding of lead metal at a given thickness, has high mechanical properties, can be cast into complex shapes, and is easily machined with lead free processing techniques. this material is non-flammable and meets UL94V-0.
Eagle Chemicals
USP-EAGLE (GP25-65)
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Cure Method:
Chemical Cure
Processing Methods:
Lamination
USP-EAGLE (GP25-65) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color and low viscosityit is used in general-purpose & glass fiber lamination.
SACO AEI Polymers
PEXIDAN® HF SX623
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.3 - 10.3 MPa
PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.
Leepoxy Plastics
Leecast 37-90
Polymer Name:
Epoxy Resins & Compounds
LEECAST 37-90 is a proprietary anhydride cured epoxy system. LEECAST 37-90 is light in color and may be used with features a convenient 1:1 by volume mix ratio. Electrical properties are excellent. Mechanical and thermal properties are also very good - comparable with resins cured with amine hardeners.
SACO AEI Polymers
PEXIDAN® HF SX612S
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX612S pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612S has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
Resin Systems
Resin Systems RS-2279 Outdoor Epoxy Resin
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
105.417 - 105.417 MPa
RS-2279 is a castable, filled epoxy resin specifically designed to operate under high voltage conditions in outdoor applications, as well as SF6 environments. This material provides excellent electrical grade insulation properties, high mechanical properties, and superior resistance to chemicals including concentrated acids and mild alkalines.
Eagle Chemicals
USP-EAGLE (PIP40-42)
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Polyesters, Orthophthalics
Cure Method:
Chemical Cure
Processing Methods:
Hand Lay-Up, Filament Winding
USP-EAGLE (PIP40-42) is Unsaturated Polyester resin ortho based, very good mechanical properties, low viscosity, medium reactivity, and good rigidityit is used in filament winding, hand lay-up in pipe manufacturing.
Leepoxy Plastics
Leecast 15-95-3
Polymer Name:
Epoxy Resins & Compounds
Volume Resistivity:
2000000000000.0 - 2000000000000.0 Ohm-m
LEECAST 15-95-3 is a two-part epoxy casting compound designed for encapsulation of high voltage components. Used in UL-listed applications requiring excellent electrical performance, heat dissipation,and flame retardance, it provides a system that is non-burning and highly resistant to thermal cycling with minimal effect on components.
Resin Systems
Resin Systems RS-2299
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
High Voltage Insulation
Flexural Strength:
55.12 - 55.12 MPa
RS-2299 is a patented, high density filled, castable, lead free insulating grade epoxy resin specifically designed for high voltage insulator applications requiring x-ray shielding. This material provides greater than 20% of the x-ray shielding of lead metal, and is equivalent or better than industry standard 30% lead oxide filled “orange†epoxy. This material is non-hazardous, and meets UL94V-0 flammability requirements.
SACO AEI Polymers
PEXIDAN® HF SX545
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1490.0 - 1490.0 kg/m³
Tensile Strength:
12.0 - 12.0 MPa
PEXIDAN® HF SX545 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX545 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
ADEKA Corporation
ADEKA™ EPR-1415-1
Polymer Name:
Epoxy Resins & Compounds
ADEKA™ EPR-1415-1, a cutting-edge epoxy resin and compound polymer, showcases its prowess in the plastics technology field. Boasting exceptional characteristics such as good adhesion and impact resistance, this product ensures not only reliability but also durability in a myriad of applications. Experience the next level of performance and versatility with ADEKA™ EPR-1415-1.
SACO AEI Polymers
PEXIDAN® HF X/T
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Building Wire Insulation, Low Voltage Insulation, Cables, Building Materials, Wires
Density:
1290.0 - 1290.0 kg/m³
PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.
Leepoxy Plastics
Leecast 16-46 A
Polymer Name:
Epoxy Resins & Compounds
Volume Resistivity:
1000000000000.0 - 1000000000000.0 Ohm-m
Leecast 16-46 A is a two-part epoxy compound designed for the encapsulation of electrical and electronic components. The advantages of LEECAST 16-46 include flame retardancy, good thermal shock resistance, good electrical properties, non-abrasive filler, easy 1 to 1 mix ratio and room temperature cure.
ADEKA Corporation
ADEKA™ EP-4100E
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Laminates, Electrical/Electronic Applications
ADEKA™ EP-4100E, an epoxy resins and compounds variant, is tailored for plastics and elastomers processing through casting techniques. ADEKA™ EP-4100E is primarily intended for end uses in electrical and electronic applications and laminates. This specialized polymer ensures optimal performance in these specific industrial applications.
ADEKA Corporation
ADEKA™ EP-4088L
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
ADEKA™ EP-4088L, a specialized epoxy resin and compound polymer, boasts high purity, making it an exceptional choice for diverse applications. Tailored for plastics processing methods, particularly casting, ADEKA™ EP-4088L ensures optimal material performance in various settings. Leveraging advanced plastic technologies, this polymer stands out for its purity, addressing the stringent requirements of industries where high-quality materials are paramount. As a reliable solution for casting processes, ADEKA™ EP-4088L caters to the specific needs of industries demanding precision and purity in their applications.
ADEKA Corporation
ADEKA™ EP-4080E
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Electrical/Electronic Applications
ADEKA™ EP-4080E, a distinguished epoxy resins and compounds variant, is tailored for specific plastics and elastomer processing methods, especially casting. With a prime focus on applications in the electrical and electronic domains, ADEKA™ EP-4080E ensures optimal material performance in these specialized settings. As a reliable choice for casting processes, this polymer addresses the unique requirements of electrical and electronic applications, making it an ideal solution for industries demanding precision and reliability.
SACO AEI Polymers
PEXIDAN® HF SX650
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
12.0 - 12.0 MPa
PEXIDAN® HF SX650 pre-grafted base is mixed with catalyst masterbatch CM603 or CM601, in an addition rate between 3% and 5%, depending on extrusion conditions. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX650 system has been developed to meet specification requirements TUV 2Pfg1169:2007, EN 50618:2014 and IEC 62930.
ADEKA Corporation
ADEKA™ ED-523T
Polymer Name:
Epoxy Resins & Compounds
ADEKA™ ED-523T, distinguished by the polymer name epoxy resins and compounds, is a specialized resin designed for plastics and elastomer functions. With a foundation in advanced plastic technologies, it stands as a vital component in formulations within the plastics industry, embodying a commitment to excellence in resin applications.
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10