Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Polyurethanes
Products in Polyurethanes
249 Products found in Polyurethanes
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound TF002
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Injection Molding
End Uses:
Commercial Appliance, Industrial Applications, Displays, Home Appliances, Cell Phones, Tablets, Electrical/Electronic Applications, Semiconductor Applications, Sporting Goods, Consumer Applications, Appliances, Computer Components
Density:
1310.0 - 1310.0 kg/m³
SABIC's Specialties Business LNP THERMOCOMP TF002 compound is based on Polyurethane (TPU) resin containing 10% glass fiber. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ STAT-KON™ Compound TX06488
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Injection Molding
End Uses:
Semiconductor Applications, Wires, Industrial Applications, Electrical/Electronic Applications, Cables
Density:
1280.0 - 1280.0 kg/m³
SABIC's Specialties Business LNP STAT-KON TX06488 compound is based on Polyurethane (TPU) resin containing conductive carbon powder. Added features of this grade include: Excellent Ductility, Electrically Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Leepoxy Plastics
Leecast 30-125
Polymer Name:
Polyurethane (unspecified)
LEECAST 30-125 is a two-component urethane that is mixed and poured at room temperature. LEECAST 30-125 develops full hardness after 24 hours at room temperature to provide an impact, UV and temperature resistant system.
Leepoxy Plastics
Leecast 20-73
Polymer Name:
Polyurethane (unspecified)
LEECAST 20-73 is a two-part, reversion resistant, electrical grade room temperature curing potting compound. It is a unique urethane system that contains neither MOCA nor TDI. LEECAST 20-73 is designed to provide excellent dielectric properties over a wide temperature range. It has good low temperature flexibility and is ideally suited for protecting pressure sensitive glass diodes and other electronic devices. Its low viscosity and long pot life make it attractive for penetrating complex modules and for the aggregate casting method of encapsulation and potting. LEECAST 20-73 also features excellent reversion resistance or hydrolytic stability.
Eagle Chemicals
Eagle Chemicals Polyol SHS 100 C
Polymer Name:
Polyurethane (MDI-based)
Chemical Family:
Polyurethanes (PU)
Polyol SHS 100 C / Cross.101 / ISO.SHS 100 A is Three component PU system suitable for the production of Soft Casual soles.
Resin Systems
Resin Systems RS-3590
Polymer Name:
Polyurethane (unspecified)
Density:
1130.0 - 1130.0 kg/m³
Resin Systems
Resin Systems RS-3675
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1108.0332 - 1108.0332 kg/m³
Rs-3675 is a castable rigid urethane material that has the look and feel of a thermoplastic material but is easily cast into intricate thin and thickwall parts. It has good mechanical properties, has high strain capability and is easily pigmented into all opaque colors.
Resin Systems
Resin Systems RS-3111
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1100.0 - 1100.0 kg/m³
Tensile Strength:
44.785 - 44.785 MPa
RS-3111 is an unfilled polyurethane that produces tough, dimensionally stable castings and is used to produce parts requiring a “thermoplastic” feel and appearance.
Resin Systems
Resin Systems RS-3665
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1200.0 - 1200.0 kg/m³
Tensile Strength:
55.12 - 55.12 MPa
Rs-3665 is a flame retardant rigid urethane material that has the look and feel of a thermoplastic material, but can be cast into thin and thickwall parts. This material offers good mechanical properties, as well as meets UL94-V-0 flammability requirements. This material can be pigmented to any color required.
Leepoxy Plastics
Leecast 23-130-5
Polymer Name:
Polyurethane (unspecified)
LEECAST 23-130-5 is a unique urethane system that contains neither MOCA nor TDI. LEECAST 23-130-5 is designed to provide excellent dielectric properties over a wide temperature range. It has good low temperature flexibility and is ideally suited for protecting pressure sensitive glass diodes and other fragile electrical circuitry in UL-listed products. Its low viscosity and long pot life make it attractive for penetrating complex modules and for the aggregate casting method of encapsulation and potting. LEECAST 23-130-5 also features excellent reversion resistance and hydrolytic stability.
Resin Systems
Resin Systems RS-3595
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1135.73403 - 1135.73403 kg/m³
RS-3595 is a castable rigid urethane material that has the look and feel of a thermoplastic material but is easily cast into intricate thin and thickwall parts. It has good mechanical properties, has high strain capability and is easily pigmented into all opaque colors.
Eagle Chemicals
Eagle Chemicals Polyol SHR 300 C
Polymer Name:
Polyurethane (MDI-based)
Chemical Family:
Polyurethanes (PU)
Polyol SHR 300 C / Cross.303 / ISO.SHR 300 A is Three component PU system suitable for the production of high hardness fashion soles.
Resin Systems
Resin Systems RS-3720
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1050.0 - 1050.0 kg/m³
Tensile Strength:
31.005 - 31.005 MPa
RS-3720 is a high performance rigid shore D-70 urethane material that has the look and feel of a thermoplastic material but can be cast into thin and thickwall parts. This material offers outstanding mechanical properties, including very high impact strength. This material can be pigmented to any color required.
Resin Systems
Resin Systems RS-3693
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
Density:
1250.0 - 1250.0 kg/m³
Tensile Strength:
44.096 - 44.096 MPa
RS-3693 is a filled castable urethane that produces dimensionally stable castings with a “thermoplastic” feel and appearance.
Resin Systems
Resin Systems RS-3690
Polymer Name:
Polyurethane (unspecified)
Density:
1250.0 - 1250.0 kg/m³
Tensile Strength:
75.101 - 75.101 MPa
Smooth On
Smooth-Cast™ 322
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Modeling Material, Dental Applications, Prototyping, Body Implants, Jewelry
Density:
1050.0 - 1050.0 kg/m³
Tensile Strength:
20.67 - 20.67 MPa
Smooth-Cast™ 322 consists of ultra-low viscosity casting resins that yield virtually bubble-free off-white castings. The Smooth-Cast™ 320 resins are sister products to our popular Smooth-Cast™ 300 Series of bright white plastics, but are easier to color using SO-Strong™, UVO™ or Ignite™ color tints. Smooth-Cast™ 320 series is easy to mix and pour, offering the convenience of a 1A:1B by volume or 100A : 90B by weight mix ratio.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 321 FRComp. A+B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Electronic Data Processing, Automotive Interior Parts, Automotive Exterior Parts, Medical/Healthcare Applications, Medical Devices
Density:
1170.0 - 1230.0 kg/m³
ebalta MG 321 FR is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. As release agent you can use our T 03-01. MG 321 FR beige fire behavior according to UL 94, 3 mm thickness V0 With MG 883 the potlife of MG 321 FR beige can be set up to 120 secs. MG 321 FR-S beige/ black - Approved according to UL 94 - File E191776 Vol. 1 fire behavior based on UL 94, 3 mm thickness V0 and 5VA
DIC Corporation
Pandex™ TP-1318
Polymer Name:
Polyurethane (unspecified)
PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.
Rampf Group
RAKU® TOOL PH-3978
Polymer Name:
Polyurethane (unspecified)
End Uses:
Industrial Castings
RAKU® TOOL PH-3978 has the following properties: unfilled, very low viscosity, high fill rate capability, good cure, very high strength, and good temperature resistance.
BCC Products
BCC Resins™ BC 8002
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BCC Kwik Kast II is an advanced fast cast polyurethane tooling system. BC 8002 exhibits exceptionally low viscosity, low odor and is color contrasted for uniform mix. It features low exotherm and minimal shrinkage. Kwik Kast II cures hard, yet more durable resulting in less brittle parts. Uses include; tracing models core boxes, duplicating aids, patterns, prototypes, low temperature vacuum form tools, etc.Handling Properties:BCC's Kwik Kast II is a fast-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Kwik Kast II contains components of high density there will be some separation at the bottom of each container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For plaster or wood surfaces seal with PVC sealer to ensure complete absence of moisture, followed by 2-3 coats of 87 Parting Agent.Mixing and Pouring:Although not necessary, best results are obtained by evacuation of each component under 29 inches of vacuum which removes entrapped air prior to blending the two components. Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 60-90 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 956 90Comp. A+B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Tires, Tubing, Flexible Grips
Density:
1030.0 - 1070.0 kg/m³
Tensile Strength:
6.0 - 8.0 MPa
This product is a polyurethane system. "VP"-products are experimental products. Regarding technical data slight modifications are possible.
Hapco Inc.
Di-Pak™ E-4540
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
Hapco Inc.
Di-Pak™ R-4525/40
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 965 40Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Mold Making
Density:
1170.0 - 1230.0 kg/m³
Tensile Strength:
2.5 - 3.5 MPa
This product is a polyurethane system. No load on GM 965-40 before 24 hrs. curing at room temperature (23°C) If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 979PUR 1
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Injection Molding, Casting
End Uses:
Foundry Dressings
Density:
1600.0 - 1700.0 kg/m³
Ebalta GM 979 is an easy-to-handle-2components-polyurethane casting compound which shows very low adhesive properties compared to molding sand. Due to its high abrasion resistance, GM 979 is especially suitable for foundry patterns, which have to resist to abrasive wear by molded sand. GM 979 even keeps its high mechanical strength when using molding sands with higher temperatures.
Hapco Inc.
Di-Pak™ R-4545/7
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.
Nippon Pelnox
Nippon Pelnox MU-120A
Polymer Name:
Polyurethane (unspecified)
End Uses:
Automotive Electronics, Semiconductor Applications, Encapsulant
The MU-120A performs the following functions: flexibility, low stress, heat resistance, stress release, and shock absorption.
BCC Products
BCC Resins™ DP-11-90
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
DP-11-90 is an unfilled, low viscosity, quick setting two component urethane system. An easy to use 1 to 1 mix ratio (Part A/Part B), DP-11-90 offers the user a 3 minute working time with parts demoldable in as little as 30 minutes. When properly cured, DP-11-90 will exhibit high impact strength and yield thermoplastic-like parts. Some outstanding features include the following: Mercury free High impact strength Moderate heat resistance No objectionable odor 1 to 1 mix ratio Excellent finishing properties Turns tan color upon cure Thermoplastic appearance Longer mold life More parts per day
Hapco Inc.
Ultralloy™ 109
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Vacuum Casting, Casting
End Uses:
Toys, Prototyping, Agricultural Applications, Housings, General Purpose
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 100 SERIESA series of general purpose Liquid Molding Compounds. This product turns a natural white but is available pigmented white for extra brightness. Both versions are available in an 8.5 minute or 25 minute gel time.
Lati Industria Thermoplastici S.p.A
Latilub™ 92-Y10
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Injection Molding
Density:
1250.0 - 1250.0 kg/m³
BCC Products
BCC Resins™ MB5000
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Machining
End Uses:
Molds/Dies/Tools, Prototyping, Agricultural Applications
BCC Products now offers a revolutionary state-of-the-art machineable high density board for today's demanding tooling requirements. MB 5000 is an extremely tough, high impact Urethane Plank that can be used for metal forming as well as nickel plating mandrels.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh ebatempPUR 5
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Foundry Dressings
Density:
1600.0 - 1700.0 kg/m³
Ebalta ebatemp is a high-quality two-component Polyurethane casting resin, which is very suitable for the production of vacuum thermoformed moldings. The fast casting resin, which is filled with very fine aluminum powder is very well castable and after curing very well polishable and workable. With ebatemp vacuum thermoformed moldings can be produced within 1-2 hours, these moldings show a temperature capacity of 80-90°C . Post-curing is not necessary. Material should be carefully stirred up/ shacked before use.
Nippon Pelnox
Pel-Urethane® MU-231B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Speed Sensor, Relay Bases, Automotive Electronics
MU-231B its Functions Low Stress, High Thermal Conductivity, Stress Release, Shock Absorption.
BIP (Oldbury) Ltd.
Surkopak® 2135
Polymer Name:
Polyurethane (MDI-based)
Features:
Excellent Flexibility, High Plasticizing Efficiency, Soft
End Uses:
Food Packaging
Surkopak® 2135 is a plasticising polyurethane resin intended for nitrocellulose based inks and coating systems. An extensive range of aromatic polyether based Surkopak® products is available in a choice of hardness and plasticising effects, which can be applied to both rigid and flexible substrates.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 986 1Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Foundry Dressings
Density:
1080.0 - 1120.0 kg/m³
Tensile Strength:
30.0 - 40.0 MPa
GM 986-1 Comp. B (Amine) can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. This material is most suitable for high pressure molding plants with high molding pressure and temperature resistance. For application at 60°C Shore hardness D is between 60-62! The postcured material is not UV stable and darkens by and by. However according to our experience the change in color does not affect its utilizability. As bonding agent on aluminum support we recommend our PU coupling paste KP 8. The material is also dimensionally stable at high temperatures. At a mold temperature of approx. 60°C a Shore hardness D of 62-64 will still be reached. Due to remanent brittleness, for complicated geometries we recommend demoulding after 48 hrs. As bonding agent on aluminum support we recommend our PU coupling paste KP 8.
Nippon Pelnox
Nippon Pelnox MU-107A
Polymer Name:
Polyurethane (unspecified)
End Uses:
Speed Sensor, Relay Bases, Automotive Electronics, Semiconductor Applications, Encapsulant
MU-107A It has the following properties: flexibility, low stress, moisture resistance, stress release, and shock absorption.
Show
36
of 249 results
Go to page
1
2
3
4
5
6
7