Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Products in Ready-to-Use Products
15,467 Products found in Ready-to-Use Products
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Product Type
Application Area
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
SILRES® BS 17040 A
Product Type:
Solventless & High Solids Coating, Primer, Waterborne Coating
Compatible Substrates & Surfaces:
Concrete
Features:
High Capacity of Penetration, Long Shelf Life, Consistent High Quality, Freeze/Thaw Stability, Alkali Resistant, Water-based, Good Adhesion, Low Water Absorption, Water Resistant, Solventless, High Durability, Breathable
Chemical Family:
Silanes
SILRES® BS 17040 A is a water-thinnable, solventless silane emulsion that serves as a high-quality water repellent for impregnating and priming alkaline mineral surfaces. Similar to SILRES® BS 17040, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.
Wacker Chemie AG
ELASTOSIL® E43 N Black
Product Type:
1K (1 component) Sealant
Application Area:
Form In Plastic Gaskets (FIPG), White Goods, Gaskets
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® E43 N Black is a one-part, non-slump, self-leveling silicone adhesive. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully cured ELASTOSIL® E43 N Black shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C without damage.
Wacker Chemie AG
DEHESIVE® PSA 630 T
Chemical Family:
Silicones
Product Type:
Pressure Sensitive Adhesive, Solventborne Adhesive
Compatible Substrates & Surfaces:
Polyimide, Polyamide
DEHESIVE® PSA 630 T is a solvent-based silicone pressure-sensitive adhesive intended particularly for coating films but also other substrates. It can be used for coating several film substrates, such as polyester, polyamide, polyimide, and other substrates, for the manufacture of different silicone pressure-sensitive adhesive tapes and other articles.
Wacker Chemie AG
WACKER® 130 - Glass and Glazing
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Adhesive
Application Area:
Window Frames
Compatible Substrates & Surfaces:
Ceramic, Metal, Glass, Aluminum
Cure Method:
Air Dry, Chemical Cure, Moisture Cure
Chemical Family:
Silicones
WACKER® 130 - Glass and Glazing is a high-quality silicone sealant specifically designed for glazing and window sealing applications. This one-component, acid-curing sealant offers exceptional adhesion on glass and aluminum surfaces, along with a long shelf life and excellent processing properties. When exposed to atmospheric moisture at room temperature, WACKER® 130 Glass and Glazing undergoes curing, transforming into a permanently flexible silicone rubber.
Wacker Chemie AG
HELISOL® 10A
Product Type:
Heat Transfer Fluid
Features:
Low Pour Point, Wide Temperature Operating Range, Very Good Heat Resistance, Low Viscosity, Heat Resistance, Odorless, Long Shelf Life, Good Thermal Stability, Anti-Fouling, High Linearity, Non Corrosive, Low Density
Chemical Family:
Silicones
HELISOL® 10A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its unique chemical structure sets it apart from organic materials like mineral oils, giving it exceptional properties. HELISOL® 10A is a clear, odorless, and colorless liquid.
Wacker Chemie AG
DEHESIVE® PSA 810 M
Product Type:
Solventborne Adhesive, Pressure Sensitive Adhesive
Chemical Family:
Silicones
Features:
Good Weather Stability, Excellent Cure Response, High Flexibility, Good Moisture Resistance, Excellent Wetting Behaviour, Improved Ageing Resistance
DEHESIVE® PSA 810 M is a solvent-based, addition-curing silicone pressure-sensitive adhesive specifically designed for coating films as well as other substrates. It offers excellent control over adhesion force along with a tight adhesion force profile. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.
Wacker Chemie AG
SILPURAN® 2114 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Band-Aids, Adhesive Plaster, Medical Devices
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2114 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2114 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.
Wacker Chemie AG
WACKER® E 110
CAS Number:
9006-65-9
Functions:
Lubricant
Chemical Family:
Siloxanes
Product Type:
Lubricant
Certifications & Compliance:
REACH (Europe)
Application Area:
Thread
Synonyms:
Dimethicone
WACKER® E 110 is a nonionic macroemulsion of nonreactive polydimethylsiloxane. It is primarily used for treating fibers and textiles, either alone in aqueous dilution or in combination with organic softeners. Before mixing with organic softeners, a compatibility test is recommended. WACKER® E 110 serves as a sewing thread lubricant for polyester yarns used on high-speed sewing machines, reducing friction between the fibers.
Wacker Chemie AG
DEHESIVE® PSA 846 L
Product Type:
Solventborne Adhesive, Pressure Sensitive Adhesive
Chemical Family:
Silicones
Features:
Good Weather Stability, Excellent Cure Response, High Flexibility, Good Moisture Resistance, Excellent Wetting Behaviour, Improved Ageing Resistance
DEHESIVE® PSA 846 L is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for low adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.
Wacker Chemie AG
ELASTOSIL® RT 628 A/B
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Cure Method:
Chemical Cure, Heat Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 628 A/B is a flowable, addition-curing, 2-part silicone rubber designed for potting, encapsulation, and casting applications. This product vulcanizes at room temperature or under heat, resulting in a permanently flexible silicone rubber featuring excellent mechanical properties. Once cured, ELASTOSIL® RT 628 A/B exhibits exceptional long-term stability against weathering, moisture, and UV radiation. The silicone elastomer can withstand constant exposure to ever-changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without sustaining damage.
Wacker Chemie AG
GENIOSIL® GF 91
Functions:
Coupling Agent, Surface Modifier, Adhesion Promoter
Chemical Family:
Silanes
Product Type:
Primer
Application Method:
Air Knife Coating, Spray
GENIOSIL® GF 91 is an alkoxysilane that contains an amino-functional group. It is a clear, colorless to light yellow liquid with a characteristic amine odor. This product finds application in various areas, including building and construction adhesives, do-it-yourself projects, flooring installation, interior paints and coatings, and waterproofing membranes.
Wacker Chemie AG
WACKER® 121 - Aquarium
Product Type:
1K (1 component) Sealant
Application Area:
Wires
Compatible Substrates & Surfaces:
Glass, Ceramic
Cure Method:
Air Dry, Chemical Cure, Moisture Cure
Chemical Family:
Silicones
WACKER® 121 - Aquarium is a high-quality silicone sealant specifically formulated for the construction of aquariums and various industrial applications. This one-part, acid-curing sealant offers excellent mechanical properties and a high curing rate. When exposed to atmospheric moisture at room temperature, WACKER® 121 - Aquarium undergoes curing, resulting in a permanently flexible silicone rubber.
Wacker Chemie AG
ELASTOSIL® S 692 A/B
Product Type:
Conductive Adhesive, 2K (2 component) Sealant, Ablative Adhesive
Application Area:
Satellite, Spacecraft
Cure Method:
Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® S 692 A/B is a self-leveling, electrically conductive, addition-curing two-component silicone rubber that can be cured at room temperature or at high temperatures. It is recommended for space applications due to its low outgassing rate and low-temperature flexibility. ELASTOSIL® S 692 A/B has been developed and designed as an ablative adhesive to prevent static electrical charging effects on solar generators for space applications, such as satellites.
Wacker Chemie AG
VINNAPAS® UW 4 FS
Functions:
Shrinkage Reducing Agent, Binder & Resin
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Polyvinyl Acetates (PVA)
Product Type:
Solventborne Adhesive
VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.
Wacker Chemie AG
SILPURAN® 4200
Product Type:
1K (1 component) Adhesive
Application Area:
Medical Devices, Prosthetics
Compatible Substrates & Surfaces:
Ceramic, Metal, Glass, Plastics
Cure Method:
Air Dry, Moisture Cure
Application Method:
Roller, Air Knife Coating
Chemical Family:
Silicones
SILPURAN® 4200 is a non-slump, self-leveling silicone rubber formulation that cures at room temperature under the influence of atmospheric moisture to a silicone elastomer exhibiting good mechanical properties. SILPURAN® 4200 is designed for medical applications in compliance with Wacker Silicones' health care policy.
Wacker Chemie AG
SILRES® BS 2001
Functions:
Water Repellent
Chemical Family:
Siloxanes, Silanes
Product Type:
Waterborne Coating, Primer
Application Method:
Spray, Dip Coating, Brush
Compatible Substrates & Surfaces:
Concrete, Brick, Painted Surfaces
SILRES® BS 2001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. It is a ready-to-use solution that serves as a high-quality water repellent for impregnating and priming mineral surfaces. After application, the emulsion undergoes hydrolysis, releasing alcohol and converting into a silicone resin.
Wacker Chemie AG
SEMICOSIL® 961 TC A/B
Application Area:
Sensors, Batteries, Power Control Unit (PCU), Electrical Components, Electric Vehicle (EV) Batteries
Features:
Abrasion Resistant, High Durability, Tacky, Cost Effective, Easy To Dispense, Shorter Cycle Time, Soft, Good Stability, Good Thermal Conductivity, Low Volatility, Low VOC, Thermally Conductive, Shear Thinning, Good Gap Filling Capabilities, Non-slump
Chemical Family:
Silicones
SEMICOSIL® 961 TC A/B is a shear-thinning, easy-dispensing, non-slump, two-part silicone rubber that cures at room temperature. It transforms into a soft and tacky rubber with excellent thermal conductivity. Specifically designed as an interface material, SEMICOSIL® 961 TC A/B is ideal for heat sink applications in the electronics industry.
Wacker Chemie AG
ELASTOSIL® E50 N Transparent
Product Type:
Encapsulant, 1K (1 component) Sealant, Potting Compound
Application Area:
White Goods
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® E50 N Transparent is a flowable, one-part silicone rubber for potting, coating, or sealing applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully vulcanized ELASTOSIL® E50 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C without damage.
Wacker Chemie AG
DEHESIVE® PSA 820 L
Product Type:
Solventborne Adhesive, Pressure Sensitive Adhesive
Chemical Family:
Silicones
Features:
Good Weather Stability, High Hardness, Excellent Cure Response, High Flexibility, Good Moisture Resistance, Excellent Wetting Behaviour, Improved Ageing Resistance
DEHESIVE® PSA 820 L is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for low adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 100-200 °C.
Wacker Chemie AG
DEHESIVE® PSA 815 UT
Product Type:
Solventborne Adhesive, Pressure Sensitive Adhesive
Chemical Family:
Silicones
Features:
Good Weather Stability, Excellent Cure Response, High Flexibility, Good Moisture Resistance, Excellent Wetting Behaviour, Improved Ageing Resistance
DEHESIVE® PSA 815 UT is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for ultra-tight adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.
Wacker Chemie AG
SILPURAN® 2130 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Adhesive Plaster
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2130 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2130 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.
Wacker Chemie AG
SILRES® BS 16
Features:
Water Resistant
Compatible Substrates & Surfaces:
Concrete, Glass
Application Method:
Dip Coating
Chemical Family:
Silicones
SILRES® BS 16 is an aqueous solution of potassium methyl siliconate used in diluted form for the hydrophobic impregnation of mineral construction materials, making them water-repellent. The water-repellent properties of SILRES® BS 16 are developed through its reaction with atmospheric carbon dioxide (CO2), forming polymethylsilicic acid. However, it should be noted that, like all siliconates, SILRES® BS 16 may cause a white deposit on the surface of colored construction materials if used outside the recommended application guidelines.
Wacker Chemie AG
SILRES® BS 290 CF
Functions:
Binder & Resin
Chemical Family:
Siloxanes, Silanes
Product Type:
Solventless & High Solids Coating, Primer
Application Area:
Facade
Application Method:
Brush, Spray, Roller
Compatible Substrates & Surfaces:
Brick, Concrete, Stone, Ceramic, Masonry, Painted Surfaces
SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.
Wacker Chemie AG
ELASTOSIL® RT 703
Product Type:
1K (1 component) Sealant
Application Area:
Cure In Place Gasket, Form In Plastic Gaskets (FIPG), White Goods, Printed Circuit Boards, Lighting Fixtures
Cure Method:
Heat Cure
Application Method:
Screen Coating
Chemical Family:
Silicones
ELASTOSIL® RT 703 is a self-leveling, slightly thixotropic, one-part heat-curing silicone adhesive. It can also be used for surface printing purposes when applied by serigraphy. Cured ELASTOSIL® RT 703 displays excellent adhesion to various substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand changing climatic conditions, UV radiation, and temperatures as high as 200°C (392°F) without damage.
Wacker Chemie AG
ELASTOSIL® RT 622 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
2K (2 component) Sealant, Potting Compound, Encapsulant, 2K (2 component) Coating
Cure Method:
Air Dry, Chemical Cure
ELASTOSIL® RT 622 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is a flowable material and requires a two-component mixing process for curing. This product is specifically designed for applications in electronics encapsulation and hydroelectric power plants.
Wacker Chemie AG
SILPURAN® 2117 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Adhesive Plaster
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2117 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2117 A/B can be used as a skin adhesive in medical applications. It is especially suitable for bonding external mammary prostheses to the patient’s skin.
Wacker Chemie AG
ELASTOSIL® E60 N Red
Product Type:
Encapsulant, 1K (1 component) Sealant, Potting Compound
Application Area:
Cooking Appliances, White Goods
Cure Method:
Air Dry, Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® E60 N Red is a flowable, one-part silicone rubber for potting and coating applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® E60 N Red shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230 °C without damage.
Wacker Chemie AG
SILPURAN® 2112 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Adhesive Plaster
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2112 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2112 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.
Wacker Chemie AG
ELASTOSIL® E43 N Transparent
Product Type:
1K (1 component) Sealant
Application Area:
Form In Plastic Gaskets (FIPG), White Goods, Gaskets
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® E43 N Transparent is a one-part, non-slump, self-leveling silicone adhesive. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with very good mechanical properties. Fully cured ELASTOSIL® E43 N Transparent shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180 °C without damage.
Wacker Chemie AG
SILPURAN® 2122 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Band-Aids, Adhesive Plaster, Medical Devices
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2122 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive with high adhesive strength. It belongs to the silicone gel category. SILPURAN® 2122 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.
Wacker Chemie AG
ELASTOSIL® LR 3153 A/B
Product Type:
Solventless & High Solids Coating, Primer
Compatible Substrates & Surfaces:
Polyethylene Cross-Linked (PEX), Plastics, Textiles
Features:
Solventless, Fast Curing, Good Adhesion, Good Surface Gloss, Heat Stabilized
Chemical Family:
Silicones
ELASTOSIL® LR 3153 A/B is a liquid, solvent-free silicone rubber designed for coatings on textile-braided cables and a primer for bonding silicone rubber on PEX surfaces. The product has good adhesion to glass fiber and common textiles. It provides a glossy surface and may be diluted with Isopar E or other aliphatic hydrocarbons.
Wacker Chemie AG
HELISOL® 5A
Product Type:
Heat Transfer Fluid
Features:
Long Shelf Life, Anti-Fouling, High Efficiency, Non Corrosive, Low Density, Improved Heat Transfer Efficiency, High Temperature Strength, Wide Temperature Operating Range, Very Good Heat Resistance, Low Viscosity, Heat Resistance, Odorless, Good Thermal Stability, High Durability, High Linearity, Good Blocking Resistance, High Reliability, Low Pour Point
Chemical Family:
Silicones
HELISOL® 5A is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its unique chemical structure gives it exceptional properties that differentiate it from organic materials like mineral oils. HELISOL® 5A is a clear, odorless, and colorless liquid.
Wacker Chemie AG
SILRES® BS 1601
Product Type:
Primer
Application Area:
Bridges
Compatible Substrates & Surfaces:
Concrete
Features:
Low Water Absorption, Low Volatility, Water Resistant
Chemical Family:
Silanes
SILRES® BS 1601 is n-octyltriethoxysilane, which is used undiluted as a water-repellent primer and impregnating agent for normal and reinforced concrete. It offers significant benefits such as the reduction of chloride and water absorption by the concrete, minimizing concrete loss due to freeze/road salt attack, and exhibiting low volatility. Once applied to the concrete, SILRES® BS 1601 reacts with atmospheric moisture or pore water present in the concrete, resulting in the generation of the active ingredient. This active ingredient effectively reduces the water absorbency of the treated concrete while maintaining a high level of water vapor permeability. Importantly, the treatment does not block pores or capillaries within the concrete.
Wacker Chemie AG
WACKER® AKF 1000
Features:
High Purity, Low VOC, Good Release Properties, High Linearity
WACKER® AKF 1000 stands out as a linear, non-reactive polydimethylsiloxane with a viscosity of around 1000 mm²/s. Its exceptional chemical structure grants it a distinct set of properties that differentiate it from organic substances like mineral oils. The remarkable features of WACKER® AKF 1000 include its remarkably low volatile content, exceptional purity, and outstanding release capabilities.
Wacker Chemie AG
WACKER® Primer G 791 A/B
Product Type:
Solventborne Coating, Primer, 2K (2 component) Coating
Application Area:
Wires
Compatible Substrates & Surfaces:
Elastomers & Rubbers
Features:
Excellent Substrate Adhesion, Good Adhesion
WACKER® Primer G 791 A/B is a two-component, addition-curing primering system that is diluted in an organic solvent. The primer is applied to the substrate, and upon curing, it forms a primer film that firmly adheres to the substrate. Subsequently, applying a silicone rubber onto the primed substrate and undergoing vulcanization will create a tight bond between the silicone rubber and the substrate.
Wacker Chemie AG
SILRES® BS 720 A
Product Type:
1K (1 component) Coating, Solventless & High Solids Coating, Clearcoat
Compatible Substrates & Surfaces:
Concrete, Metal, Wood
Features:
Low Odor, Durable, Low VOC, High Hardness, Chemical Resistant, Water Resistant, Solventless
Application Method:
Roller, Brush
Chemical Family:
Silicones
SILRES® BS 720 A is a clear coating specifically designed to create a dry erase surface on various construction material substrates. It is formulated as a neat, solvent-free, one-part (1K) product with a silicone hybrid chemistry. SILRES® BS 720 A offers several advantages, including a very low odor and low VOC (volatile organic compound) content. When applied to compatible surfaces, SILRES® BS 720 A forms a dry erase surface, allowing users to write and erase with ease. This coating is suitable for use on a wide range of construction materials, providing versatility in application. Its clear formulation maintains the esthetic appearance of the substrate while offering the functionality of a dry-erase surface.
Show
36
of 15,467 results
Go to page
1
2
3
4
5
6
7
8
9
10