Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Paints & Coatings
Products in Paints & Coatings
4,478 Products found in Paints & Coatings
Browse
Applications
Show All 9 Categories
Filters
Suppliers
Applications
Product Type
Compatible Substrates & Surfaces
Application Method
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
SILRES® BS 17040
Product Type:
Waterborne Coating, Primer, Solventless & High Solids Coating
Compatible Substrates & Surfaces:
Concrete
Features:
High Durability, Freeze/Thaw Stability, Long Shelf Life, Water Resistant, Water-based, Breathable, Good Adhesion, Alkali Resistant, High Capacity of Penetration, Low Water Absorption, Consistent High Quality, Low Volatility, Solventless
Chemical Family:
Silanes
SILRES® BS 17040 is a high-quality, water-thinnable silane emulsion that is solvent-free. It is specifically formulated to act as a water repellent for impregnating and priming alkaline mineral surfaces. Additionally, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.
Wacker Chemie AG
SILRES® BS SMK 2101
Functions:
Water Repellent
Chemical Family:
Siloxanes, Silicones, Silanes
Product Type:
Solventless & High Solids Coating, Waterborne Coating, Primer
Compatible Substrates & Surfaces:
Concrete
SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.
Wacker Chemie AG
ELASTOSIL® LR 6200 A/B
Chemical Family:
Silicones
Functions:
Binder & Resin
Product Type:
Solventless & High Solids Coating, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Nylon, Textiles
ELASTOSIL® LR 6200 A/B is a liquid silicone rubber (LSR) that is solvent-free and free-flowing. It utilizes additive curing and consists of two components. This grade is specifically designed for textile coatings. ELASTOSIL® LR 6200 A/B has a very low viscosity, allowing for good penetration into the substrate and a dry surface touch. It is particularly well suited for textile coating applications that require enhanced flame retardancy.
Wacker Chemie AG
POWERSIL® 567
Product Type:
1K (1 component) Coating, Insulating Coating
Features:
Good Toughness, Excellent Hydrophobic Properties, Good Tracking Resistance, Good Electrical Properties, Good Weather Stability, High Voltage Insulation
Compatible Substrates & Surfaces:
Glass, Epoxies
Application Method:
Spray
Chemical Family:
Silicones
POWERSIL® 567 is a one-component silicone dispersion that, upon curing, forms a durable high-voltage insulator coating with excellent electrical properties. It exhibits very good resistance to weathering and outstanding tracking resistance. Moreover, POWERSIL® 567 creates a long-term hydrophobic surface, effectively preventing the formation of wet conductive films and reducing the risk of pollution flashovers.
Wacker Chemie AG
SILRES® BS OH 100
Product Type:
Solventless & High Solids Coating, 1K (1 component) Coating
Features:
Vapor Permeable, Tack-free, Easier Processing
Compatible Substrates & Surfaces:
Brick, Stone
Application Method:
Brush, Dip Coating, Spray
SILRES® BS OH 100 is a solventless, ready-to-use product designed for the consolidation of construction materials. Its primary application is the restoration of weather-damaged natural stone, stucco, or frescoes. Additionally, it can be used to treat other construction materials like brick or terracotta.
Gelest Inc.
Biosafe® HE4001
Ready-to-Use Product Type:
Disinfectant Products, Waterborne Coating
Certifications & Compliance:
NSF Approved, EPA Registered
Application Method:
Dip Coating, Spray, Wipe
Biosafe® HE4001 Antimicrobial is a 0.75% aqueous solution of 3-(trihydroxysilyl)propyldimethyloctadecyl ammonium chloride. The product is registered with the EPA under the number 83019-6. It effectively binds to a wide range of surfaces, providing long-lasting protection. The key highlights of this product are as follows: Synergistically enhances the effectiveness of disinfection and sanitization. Has broad compatibility and can be incorporated in a vast variety of formulations and substrates. Excellent safety profile: non-toxic, non-irritating, and does not show transdermal absorption. Typical use concentrations of 0.25 - 0.5 weight % of active relative to the substrate being treated.
Gelest Inc.
XYLEX® XYLEXPRO1
Ready-to-Use Product Type:
Disinfectant Products
Certifications & Compliance:
FDA 21 CFR 170.39, NSF Approved, EPA Registered
XYLEX® XYLEXPRO1 is a product designed to enhance the cleanability of surfaces when used alongside standard cleaning and disinfection protocols. By incorporating XYLEX® XYLEXPRO1 into the cleaning process, surfaces can remain hygienically clean for up to five weeks with just one application. Clinical testing conducted in hospital settings has demonstrated that this product enables more thorough and effective disinfection, leading to low adenosine triphosphate (ATP) levels on high touch surfaces. This allows hospitals to meet stringent ATP level standards for an extended period of time. XYLEX® XYLEXPRO1 is a water-based formula that is odorless and does not contain dye, fragrance, or harsh chemicals. It is available in both wipes and liquid forms.
Gelest Inc.
Biosafe® HE4005
Ready-to-Use Product Type:
Disinfectant Products, Waterborne Coating
Certifications & Compliance:
NSF Approved, EPA Registered
Application Method:
Dip Coating, Spray, Wipe
Biosafe® HE4005 Antimicrobial is a 5% aqueous solution of 3-(trihydroxysilyl)propyldimethyloctadecyl ammonium chloride. It is worth noting that BIOSAFE HE4001 and HE4005 are the only registered silane quat antimicrobials produced using a methanol-free process. The product is registered with the EPA under the number 83019-5. It effectively binds to a wide range of surfaces, providing long-lasting protection. The key highlights of this product are as follows: Synergistically enhances the effectiveness of disinfection and sanitization Has broad compatibility and can be incorporated in a vast variety of formulations and substrates Excellent safety profile: non-toxic, non-irritating, and does not show transdermal absorption Typical use concentrations of 0.25-0.5 wt% of active relative to the substrate being treated
BASF
Lupasol® FG
Chemical Family:
Polyethylenimine (PEI)
Functions:
Hardener, Sizing Agent, Coupling Agent, Wetting Agent, Crosslinking Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® FG is a polyethylene imine that serves as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, and is used for the complexation of heavy metal ions. It can also be used as a primer for improved adhesion of coatings to the substrate, for easier dispersion of pigments and higher color strength, and for the immobilization of proteins on inorganic materials.
BASF
Lupasol® PR 8515
Chemical Family:
Polyethylenimine (PEI)
Functions:
Hardener, Hydrophilizing Agent, Polarizing Agent, Sizing Agent, Defoamer, Coupling Agent, Leveling Agent, Crosslinking Agent, Complexing Agent, Hydrophobic Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® PR 8515 is a polyethylene imine that functions as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, aids in the complexation of heavy metal ions, facilitates the easier dispersion of pigments and increases color strength, and enables the immobilization of proteins on inorganic materials. It is also used as a primer to improve adhesion to the substrate for coatings.
BASF
Lupasol® G 20 Waterfree
Chemical Family:
Polyethylenimine (PEI)
Functions:
Hardener, Polarizing Agent, Sizing Agent, Coupling Agent, Leveling Agent, Crosslinking Agent, Complexing Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® G 20 is a water-free polyethylene imine that functions as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, and aids in the complexation of heavy metal ions. It is used as a primer for improved adhesion to the substrate for coatings, facilitates the easier dispersion of pigments and provides higher color strength, and enables the immobilization of proteins on inorganic materials.
BASF
Lupasol® G 20
Chemical Family:
Polyethylenimine (PEI)
Functions:
Lubricant, Hardener, Sizing Agent, Coupling Agent, Crosslinking Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® G 20 is a versatile polyethylene imine that serves as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, and aids in the complexation of heavy-metal ions. It also facilitates the easier dispersion of pigments and enables the immobilization of proteins on inorganic materials.
Wacker Chemie AG
SILRES® BS 16040
Product Type:
Primer, Waterborne Coating, Solventless & High Solids Coating
Application Area:
Bridges
Compatible Substrates & Surfaces:
Concrete
Features:
Water-based, Low Volatility, Excellent Substrate Adhesion, High Capacity of Penetration, Long Shelf Life, High Durability, Freeze/Thaw Stability, Alkali Resistant
Chemical Family:
Silanes
SILRES® BS 16040 is a water-dilutable, solvent-free silane emulsion. It is a high-quality specialty product used for the hydrophobic impregnation and priming of alkaline substrates. When applied to construction materials, SILRES® BS 16040 reacts with atmospheric moisture and/or water present in the pores of the building material. This reaction eliminates alcohol and forms an active substance that greatly reduces the absorbency of the concrete within the active zone (penetration depth after post-treatment). Importantly, this reduction in absorbency occurs without blocking any pores or capillaries in the material. As a result of the impregnation, the treated building material retains its high water-vapor permeability, allowing moisture to pass through while still providing excellent protection against water penetration.
Wacker Chemie AG
SILRES® BS 2001
Functions:
Water Repellent
Chemical Family:
Siloxanes, Silanes
Product Type:
Waterborne Coating, Primer
Application Method:
Spray, Dip Coating, Brush
Compatible Substrates & Surfaces:
Concrete, Brick, Painted Surfaces
SILRES® BS 2001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. It is a ready-to-use solution that serves as a high-quality water repellent for impregnating and priming mineral surfaces. After application, the emulsion undergoes hydrolysis, releasing alcohol and converting into a silicone resin.
Wacker Chemie AG
SILRES® BS 1001 A
Product Type:
Primer
Compatible Substrates & Surfaces:
Concrete, Brick
Features:
Good Stability, Blister Resistance, Excellent UV Stability, Excellent Aesthetics, Cost Effective, Low VOC, Long Shelf Life, Excellent Dirt Pick-up Resistance, Freeze/Thaw Stability, Crack Resistant, Vapor Permeable, Good Adhesion, Prevents Thermo-Oxidative Degradation, Microbe Resistant, Peel Resistance, Chemical Resistant, Efflorescence Control, Cleanable, Water Resistant, High Durability
Chemical Family:
Silicones
SILRES® BS 1001 A is a stable, VOC-compliant, 50% active silicone emulsion that reduces with water to form a stable, penetrating water repellent emulsion. SILRES® BS 1001 A is developed to treat a wide variety of mineral substrates, including architectural concrete, concrete block, split-face block, pavers, stucco, porous and dense brick, clay tile, and exposed aggregate concrete. It is particularly effective in the do-it-yourself (DIY) markets, where good water repellency, beading, ease of use, and stability are required. SILRES® BS 1001 A is not recommended for below-grade applications where hydrostatic pressure can be significant.
Wacker Chemie AG
WACKER® HC 100
Features:
Chemical Resistant, High Durability, Water Resistant, Low VOC, Freeze/Thaw Stability, Peel Resistance, Efflorescence Control, Microbe Resistant, Good Stability, Prevents Thermo-Oxidative Degradation, Crack Resistant, Good Adhesion, Vapor Permeable, Excellent Dirt Pick-up Resistance, Excellent Aesthetics, Long Shelf Life, Blister Resistance, Cost Effective, Excellent UV Stability, Cleanable
Compatible Substrates & Surfaces:
Concrete, Brick, Clay
Chemical Family:
Silicones
WACKER® HC 100 is a stable, VOC-compliant silicone emulsion with 50% actives. It can be diluted with water to create stable and penetrating water repellent emulsions. WACKER® HC 100 is specifically designed for treating various mineral substrates, such as architectural concrete, concrete block, splitface block, pavers, stucco, porous and dense brick, clay tile, and exposed aggregate concrete. This product is particularly effective in the Do-It-Yourself (DIY) market, where there is a need for good water repellency, beading, ease of use, and stability. However, it is not recommended for below-grade applications where there may be significant hydrostatic pressure.
Wacker Chemie AG
SILRES® BS 17040 A
Product Type:
Solventless & High Solids Coating, Primer, Waterborne Coating
Compatible Substrates & Surfaces:
Concrete
Features:
High Capacity of Penetration, Long Shelf Life, Consistent High Quality, Freeze/Thaw Stability, Alkali Resistant, Water-based, Good Adhesion, Low Water Absorption, Water Resistant, Solventless, High Durability, Breathable
Chemical Family:
Silanes
SILRES® BS 17040 A is a water-thinnable, solventless silane emulsion that serves as a high-quality water repellent for impregnating and priming alkaline mineral surfaces. Similar to SILRES® BS 17040, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.
Wacker Chemie AG
SILRES® BS 290 CF
Functions:
Binder & Resin
Chemical Family:
Siloxanes, Silanes
Product Type:
Solventless & High Solids Coating, Primer
Application Area:
Facade
Application Method:
Brush, Spray, Roller
Compatible Substrates & Surfaces:
Brick, Concrete, Stone, Ceramic, Masonry, Painted Surfaces
SILRES® BS 290 CF is a solventless silicone concentrate based on a mixture of silane and siloxane. Like SILRES® BS 290, it can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 CF in organic solvents serve as high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.
Wacker Chemie AG
SEMICOSIL® 949 UV A/B
Chemical Family:
Silicones
Product Type:
Potting Compound, Conformal Coating, Radiation Curable Coating, 2K (2 component) Adhesive, 2K (2 component) Coating, Encapsulant
Cure Method:
Chemical Cure, Heat Cure, Radiation Cure, Air Dry
Application Area:
Housing, Electrical Components, Power Control Unit (PCU), Sensors, Electronic Control Unit (ECU)
Application Method:
Spray
SEMICOSIL® 949 UV A/B is a pourable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft silicone elastomer. SEMICOSIL® 949 UV A has a mixing ratio of 10:1 for its two parts and exhibits low viscosity, making it easy to handle and process. It offers the advantage of extremely fast curing at room temperature after UV activation. The cured elastomer has low hardness (Shore 00). Additionally, SEMICOSIL® 949 UV A contains a UV tracer, providing process control options during application.
Wacker Chemie AG
VINNAPAS® 202 HD
Functions:
Binder, Binder & Resin
Chemical Family:
Styrenics, Acrylics & Acrylates, Styrene-Acrylic Copolymer
Product Type:
Primer, 1K (1 component) Coating
Compatible Substrates & Surfaces:
Concrete
VINNAPAS® 202 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.
Wacker Chemie AG
SILRES® BS 16
Features:
Water Resistant
Compatible Substrates & Surfaces:
Concrete, Glass
Application Method:
Dip Coating
Chemical Family:
Silicones
SILRES® BS 16 is an aqueous solution of potassium methyl siliconate used in diluted form for the hydrophobic impregnation of mineral construction materials, making them water-repellent. The water-repellent properties of SILRES® BS 16 are developed through its reaction with atmospheric carbon dioxide (CO2), forming polymethylsilicic acid. However, it should be noted that, like all siliconates, SILRES® BS 16 may cause a white deposit on the surface of colored construction materials if used outside the recommended application guidelines.
Wacker Chemie AG
GENIOSIL® GF 91
Functions:
Coupling Agent, Surface Modifier, Adhesion Promoter
Chemical Family:
Silanes
Product Type:
Primer
Application Method:
Air Knife Coating, Spray
GENIOSIL® GF 91 is an alkoxysilane that contains an amino-functional group. It is a clear, colorless to light yellow liquid with a characteristic amine odor. This product finds application in various areas, including building and construction adhesives, do-it-yourself projects, flooring installation, interior paints and coatings, and waterproofing membranes.
Wacker Chemie AG
SILRES® BS 1803 A
Product Type:
Concrete Admixture, Sealer
Application Method:
Roller, Brush, Spray
SILRES® BS 1803 A is a stable and VOC-compliant silicone emulsion with a 60% active content. It is specifically designed to reduce water uptake and create visual beading on concrete substrates while allowing the pores and capillaries to remain unblocked. This product is particularly effective when it comes to preventing water uptake and promoting beads, even at very low addition levels. One of the main applications of SILRES® BS 1803 A is as an admixture for non-load bearing cement-based formulated products, including precast products, blocks, and pavers. By incorporating this emulsion into the formulation, the resulting products gain enhanced waterproofing properties and resistance to water penetration. Furthermore, SILRES® BS 1803 A can also be used as a topical sealer for post-treatment of cement-based formulated products.
Wacker Chemie AG
SEMICOSIL® 942 UV A/B
Chemical Family:
Silicones
Product Type:
Potting Compound, Conformal Coating, Radiation Curable Coating, 2K (2 component) Coating, Encapsulant
Cure Method:
Radiation Cure, Air Dry, Chemical Cure
Application Area:
Electric Vehicle (EV) Batteries, Printed Circuit Boards
Application Method:
Spray
SEMICOSIL® 942 UV A/B is a sprayable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft conformal coating. SEMICOSIL® 942 UV A/B exhibits low viscosity and shear-thinning properties, making it suitable for spray applications. It offers the advantage of extremely fast curing at room temperature after UV activation, as well as the ability for shadow curing. Additionally, it contains a UV tracer, providing process control options during application.
Wacker Chemie AG
SILRES® BS 290
Chemical Family:
Silanes, Siloxanes
Functions:
Binder & Resin
Product Type:
Primer, Solventless & High Solids Coating
Compatible Substrates & Surfaces:
Marble, Concrete, Stone, Masonry, Brick, Painted Surfaces
SILRES® BS 290 is a solventless silicone concentrate based on a mixture of silane and siloxane. It can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents are high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.
Wacker Chemie AG
GENIOSIL® WP 1
Functions:
Binder, Binder & Resin
Chemical Family:
Silane-Terminated Polyether (STPE)
Product Type:
Primer, Potting Compound, Encapsulant
Cure Method:
Moisture Cure
Application Method:
Spray, Roller
GENIOSIL® WP 1 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.
Wacker Chemie AG
VINNAPAS® 224 HD
Functions:
Binder, Binder & Resin
Chemical Family:
Styrenics, Acrylics & Acrylates, Styrene-Acrylic Copolymer
Product Type:
Primer, 1K (1 component) Coating
Compatible Substrates & Surfaces:
Concrete
VINNAPAS® 224 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.
Wacker Chemie AG
Wacker Chemie Primer FMP HC
Product Type:
Primer
Features:
High Rigidity, Excellent Substrate Adhesion
Application Method:
Brush, Spray, Dip Coating
Chemical Family:
Silanes
Wacker Chemie Primer FMP HC is a solution of reactive silanes in a mixture of isoalkanes. After the solvent evaporates, exposure to atmospheric humidity at ambient or elevated temperature leads to the formation of a rigid film of silicone resin that firmly adheres to the substrate. The catalyzed silicone rubber applied on top forms a tight bond with this resin film during vulcanization.
Wacker Chemie AG
WACKER® G 795
Product Type:
Primer
Compatible Substrates & Surfaces:
Elastomers & Rubbers
Features:
Excellent Substrate Adhesion, Good Rigidity
Chemical Family:
Silicones, Siloxanes
WACKER® G 795 is a solution consisting of reactive siloxanes and silicone resins dissolved in a blend of isoalkanes. When the solvent evaporates, the remaining mixture forms a rigid film of silicone resin upon exposure to ambient or elevated temperatures and atmospheric humidity. This resin film firmly adheres to the substrate. Subsequently, when catalyzed silicone rubber is applied and vulcanized on top of the resin film, it forms a strong bond.
Wacker Chemie AG
SILRES® IC 701
Product Type:
Coating
Features:
Water Resistant, Anti-graffiti, Excellent Substrate Adhesion, Good Release Properties, Air Drying, Good Weather Stability
Compatible Substrates & Surfaces:
Concrete, Metal
Application Method:
Spray
Chemical Family:
Silicones, Siloxanes
SILRES® IC 701 is an anti-graffiti coating intended for use in the professional market for the protection of concrete, masonry, and metal substrates. The cured coating provides excellent release and ease of removal for permanent markers and aerosol paints. SILRES® IC 701 is based on polysiloxane polymers and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. It cures via the condensation reaction at room temperature by reacting with ambient moisture.
Wacker Chemie AG
ELASTOSIL® LR 3153 A/B
Product Type:
Solventless & High Solids Coating, Primer
Compatible Substrates & Surfaces:
Polyethylene Cross-Linked (PEX), Plastics, Textiles
Features:
Solventless, Fast Curing, Good Adhesion, Good Surface Gloss, Heat Stabilized
Chemical Family:
Silicones
ELASTOSIL® LR 3153 A/B is a liquid, solvent-free silicone rubber designed for coatings on textile-braided cables and a primer for bonding silicone rubber on PEX surfaces. The product has good adhesion to glass fiber and common textiles. It provides a glossy surface and may be diluted with Isopar E or other aliphatic hydrocarbons.
Wacker Chemie AG
WACKER® Primer G 791 A/B
Product Type:
Solventborne Coating, Primer, 2K (2 component) Coating
Application Area:
Wires
Compatible Substrates & Surfaces:
Elastomers & Rubbers
Features:
Excellent Substrate Adhesion, Good Adhesion
WACKER® Primer G 791 A/B is a two-component, addition-curing primering system that is diluted in an organic solvent. The primer is applied to the substrate, and upon curing, it forms a primer film that firmly adheres to the substrate. Subsequently, applying a silicone rubber onto the primed substrate and undergoing vulcanization will create a tight bond between the silicone rubber and the substrate.
Wacker Chemie AG
SILRES® BS 1601
Product Type:
Primer
Application Area:
Bridges
Compatible Substrates & Surfaces:
Concrete
Features:
Low Water Absorption, Low Volatility, Water Resistant
Chemical Family:
Silanes
SILRES® BS 1601 is n-octyltriethoxysilane, which is used undiluted as a water-repellent primer and impregnating agent for normal and reinforced concrete. It offers significant benefits such as the reduction of chloride and water absorption by the concrete, minimizing concrete loss due to freeze/road salt attack, and exhibiting low volatility. Once applied to the concrete, SILRES® BS 1601 reacts with atmospheric moisture or pore water present in the concrete, resulting in the generation of the active ingredient. This active ingredient effectively reduces the water absorbency of the treated concrete while maintaining a high level of water vapor permeability. Importantly, the treatment does not block pores or capillaries within the concrete.
Wacker Chemie AG
SILRES® BS 720 A
Product Type:
1K (1 component) Coating, Solventless & High Solids Coating, Clearcoat
Compatible Substrates & Surfaces:
Concrete, Metal, Wood
Features:
Low Odor, Durable, Low VOC, High Hardness, Chemical Resistant, Water Resistant, Solventless
Application Method:
Roller, Brush
Chemical Family:
Silicones
SILRES® BS 720 A is a clear coating specifically designed to create a dry erase surface on various construction material substrates. It is formulated as a neat, solvent-free, one-part (1K) product with a silicone hybrid chemistry. SILRES® BS 720 A offers several advantages, including a very low odor and low VOC (volatile organic compound) content. When applied to compatible surfaces, SILRES® BS 720 A forms a dry erase surface, allowing users to write and erase with ease. This coating is suitable for use on a wide range of construction materials, providing versatility in application. Its clear formulation maintains the esthetic appearance of the substrate while offering the functionality of a dry-erase surface.
CHT Group
BIOLAY 100
Product Type:
Coating
Compatible Substrates & Surfaces:
Cardboards, Paper
Features:
Good Grease Resistance
Application Method:
Curtain Coating, Size Press
Chemical Family:
Polysaccharides
BIOLAY 100 is a versatile powder designed for grease barrier coating formulations. In its off-white powder form, BIOLAY 100 offers a sustainable and eco-friendly solution for various applications. This product, derived from plant-based raw materials, is entirely free from fluorine and microplastics, aligning with environmental and safety standards. BIOLAY 100 can be easily applied using standard coating equipment like film presses, size presses, blade coaters, or curtain coaters. When applied to paper and cardboard, it demonstrates exceptional grease barrier properties, making it an ideal choice for eco-conscious and effective barrier coating solutions.
CHT Group
BIOLAY 500
Product Type:
Coating
Compatible Substrates & Surfaces:
Cardboards, Paper
Features:
Good Grease Resistance
Application Method:
Curtain Coating, Size Press
Chemical Family:
Polysaccharides
BIOLAY 500 is a specialized powder designed for grease barrier coating formulations. It's composed of a mixture of polysaccharides, making it a plant-based and environmentally friendly choice. One of its notable features is that it's entirely free from fluorine and doesn't generate microplastics, aligning with sustainable and safety standards. You can easily apply aqueous solutions of BIOLAY 500 to paper and cardboard, making it an ideal choice for creating effective grease barriers in these materials. Unlike BIOLAY 100, BIOLAY 500 has been optimized for exceptional oil repellency, making it a preferred option for applications where this property is crucial. It's important to note that solutions of BIOLAY 500 may have higher viscosities compared to BIOLAY 100, even at the same solids content.
Show
36
of 4,478 results
Go to page
1
2
3
4
5
6
7
8
9
10