Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Paints & Coatings
Products in Paints & Coatings
4,478 Products found in Paints & Coatings
Browse
Applications
Show All 9 Categories
Filters
Suppliers
Applications
Product Type
Compatible Substrates & Surfaces
Application Method
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Ankem of Texas, inc.
RAMPAGE™
Ready-to-Use Product Type:
Solventless & High Solids Coating, Waterborne Coating
Features:
Good Stain Resistance, Wear Resistant, Non-Toxic, Low Hazardous Air Pollutants, Low Odor, Corrosion Resistant, Good Color Stability, Good Brightness, Biodegradable, Tear Resistance, Oxidation Resistant
Application Area:
Wire Cables
Compatible Substrates & Surfaces:
Metal
RAMPAGE™ is an environmentally friendly, user safe, hard-shell, water base coating. A protectant from rust, corrosion, oxidation, paint discolor, wire damaging, and metals on ready mix trucks. Product quantity sold in 5 Gallons, 15 Gallons, 30 Gallons, 55 Gallons, 275 Gallons.
Swing Paints
Circa 1850® Stain'n Varnish
Applications:
Furniture, Wood Coatings & Finishes, Floor Coatings
Product Families:
Stains & Varnishes, Paints & Coatings
Circa 1850® Stain'n Varnish is both a wood stain and a varnish finish in one. Its unique gel formulation maintains a consistent blend of stain and varnish throughout the can, so there's no mixing or stirring required. As a result, you ensure uniformity from the beginning of your project to the end. And because it's a gel, it goes on without runs, drips or brush marks. Stain'n Varnish can be used on virtually any surface including wood furniture, molding, paneling and floors, pottery, metal, plastic, fiberglass, masonite and composites (or composite doors). Stain'n Varnish comes in 22 pre-mixed colors (and about a million custom-tinted colors) to suit any decor.
Swing Paints
Circa 1850® Aqua Varnish
Applications:
Furniture, Wood Coatings & Finishes, Interior Fixtures
Product Families:
Stains & Varnishes, Paints & Coatings
Circa 1850® AQUA Water-Based Varnish is a clear, tough coating that protects and beautifies wood. Its low odor and non-yellowing formula makes it an ideal finish for all interior wood surfaces. Circa 1850® Aqua Water-Based Varnish can be recoated in as little as 2 hours. It brings out the natural warmth of the wood and is formulated to clean up easily with water. Its micro-formulation permits clog-free spray application. Available in GLOSS, SEMI-GLOSS and SATIN.
Swing Paints
Circa 1850® Marine Grade Antique Paste Varnish
Applications:
Marine, Furniture, Wood Coatings & Finishes
Product Families:
Stains & Varnishes, Paints & Coatings
Circa 1850® Marine Grade Antique Paste Varnish is a gelled modified polyurethane varnish. It creates a rich patina and provides a true hand-rubbed finish that protects against heat, water and alcohol. Circa 1850® Marine Grade Antique Paste Varnish dries quickly - free from dust specks and brush marks. It is ideal for woodwork, cabinets, and all wood furniture. Circa 1850® Marine Grade Antique Paste Varnish contains transparent absorbers to screen out UV rays and inhibit the graying and fading effects of the sun, and incorporates a superior fungicide and mildewcide to increase performance.
Swing Paints
Klenk's Epoxy Enamel
Applications:
Wood Coatings & Finishes, Housewares, Building & Construction
Product Families:
Enamels, Paints & Coatings
Chemical Family:
Epoxy & Epoxy Derivatives
Klenk's Epoxy Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with Klenk's Epoxy Thinner prior to use. Klenk's Epoxy Enamel is available in three standard colors (White, Bone, Almond) as well as special order colors.
Ankem of Texas, inc.
RAMPAGE X™
Ready-to-Use Product Type:
Solventless & High Solids Coating, Waterborne Coating
Features:
Good Stain Resistance, Wear Resistant, Non-Toxic, Low Hazardous Air Pollutants, Low Odor, Corrosion Resistant, Good Color Stability, Good Brightness, Biodegradable, Tear Resistance, Oxidation Resistant
Application Area:
Wire Cables
Compatible Substrates & Surfaces:
Metal
RAMPAGE X™ is a Environmentally safe Hard-Shell, Water Base Form Release Agent designed specifically for Precast & Forms. Product quantity sold in 5 Gallons, 15 Gallons, 30 Gallons, 55 Gallons, 275 Gallons.
Swing Paints
Circa 1850® DEX Marine Grade Exterior Varnish
Applications:
Marine, Furniture, Fence, Decks & Rails
Product Families:
Stains & Varnishes, Paints & Coatings
Circa 1850® DEX Marine Grade Exterior Varnish is a clear, tough coating that protects and beautifies all exterior wood surfaces. Renewable plant oils combined with a unique polymerized tung oil formula to provide a breathable, water repellant surface. Rain and snow cannot penetrate the coating to damage the wood. However, because moisture can escape from the wood through the varnish, the wood resists rotting and the varnish is less likely to blister or crack. Circa 1850® DEX Exterior Varnish incorporates transparent absorbers to screen out UV rays and inhibit the graying and fading effects of the sun. A superior fungicide and a mildewcide increase product performance. Circa 1850® DEX Exterior Varnish is recommended for use on all exterior wood surfaces; including window frames, doors, siding, fences and patio furniture. Its long-lasting protective finish makes it ideal for use on boats, decks and marinas. For interior woodwork we recommend Circa 1850® Bowling Alley Polyurethane .
Swing Paints
Circa 1850® Aqua Wood Stain
Applications:
Furniture, Floor Coatings, Decorative Paints, Coatings & Stains
Product Families:
Stains & Varnishes, Paints & Coatings
Circa 1850® AQUA is a water-based wood stain made with the finest ingredients. It is formulated to highlight the natural grain of unfinished wood without the need for a pre-stain conditioner. Circa 1850® AQUA eliminates overlap marks and grain raising, providing uniform, beautiful color. Circa 1850® Aqua Wood Stain is available in 30 vibrant woodtone and designer colors.
Swing Paints
Circa 1850® Fast Dry Polyurethane
Applications:
Furniture, Wood Coatings & Finishes, Floor Coatings
Product Families:
Protective Coatings, Paints & Coatings
Chemical Family:
Polyurethanes (PU)
Circa 1850® Fast Dry Polyurethane is a clear, tough coating that protects and beautifies wood. It can be recoated in as little as 3 hours and cures to an exceptionally hard finish - similar to those used in bowling alleys. Its micro-formulation permits clog-free spray application. Recommended for use on all interior wood surfaces, including floors, cabinets, doors, furniture, and paneling. Available in GLOSS, SEMI-GLOSS, and SATIN sheens.
Swing Paints
Circa 1850® Woodturner's Jelly
Applications:
Furniture, Wood Coatings & Finishes, Building & Construction
Product Families:
Stains & Varnishes, Paints & Coatings
Chemical Family:
Polyurethanes (PU)
Circa 1850® Woodturner's Jelly is a gelled modified polyurethane varnish. It creates a rich patina and provides a true hand-rubbed finish that protects against heat, water and alcohol. Circa 1850® Woodturner's Jelly dries quickly - free from dust specks and brush marks. It is ideal for any woodturning projects and all wood furniture.
Clearclad Coatings
Clearclad HSR
Ready-to-Use Product Type:
1K (1 component) Coating
Features:
High Coverage, Chemical Resistant, Excellent Substrate Adhesion, Free Flowing, Good Weather Stability, Wear Resistant, Good Solvent Resistance, Medium Viscosity, Corrosion Resistant, Exceptional UV Resistance, Good Abrasion Resistance
Application Area:
Cathode
Compatible Substrates & Surfaces:
Brass, Metal, Zinc
Application Method:
E-Coat
ClearClad HSRis the first product to meet rigorous BHMA perspiration testing. It is leading product in the door hardware and plumbing industries. It is excellent choice for any application that needs excellent chemical and corrosion resistance.
Clearclad Coatings
Clearclad UVICLAD
Ready-to-Use Product Type:
Radiation Curable Coating, Clearcoat
Features:
Clarity, Mar Resistant, UV Curable, Excellent Flow Properties, Electrically Conductive, High Coverage, Medium Viscosity
Application Area:
Cathode
Compatible Substrates & Surfaces:
Metal, Plastics
ClearClad UVICLAD is a mercury lamp and LED curable product. Designed for conductive plastic, plated plastic or substrates that are exposed to normal thermal cure cycles.
Clearclad Coatings
Clearclad ULTEC
Ready-to-Use Product Type:
1K (1 component) Coating
Features:
High Reactivity, Corrosion Resistant, Color Retention, Low Temperature Resistant, Low Temperature Curing
Application Area:
Cathode
Compatible Substrates & Surfaces:
Plastics
ClearClad ULTEC is an e-coats made for the jewelry industry. ClearClad ULTEC provides excellent clarity and chemical resistance with lower (248°F) curing temperature.
Clearclad Coatings
Clearclad Lectraseal Tektor
Features:
Low Friction, Chemical Resistant, Good Weather Stability, Wear Resistant, Durable, High Hardness, UV Resistant, Excellent Lubricity, Good Abrasion Resistance
Application Area:
Anode
Compatible Substrates & Surfaces:
Metal, Gold, Nickel, Steel, Magnesium, Stainless Steel, Aluminum
Application Method:
E-Coat
Chemical Family:
Polyurethanes (PU)
Clearclad Lectraseal Tektor has same properties as the lectraseal system, but with additional dry film lubricants to increase wear and scratch resistance. PTFE, molybdenum sulfide and boron nitride incorporated into the coating increases the coatings scratch and wear resistance.
Clearclad Coatings
Clearclad HSR 415
Features:
Good Scratch Resistance, High Hardness, UV Resistant, Good Non-Yellowing Properties, High Coverage, Chemical Resistant, Excellent Substrate Adhesion, Corrosion Resistant, UV Stabilized, High Clarity, Good Weather Stability
Application Area:
Cathode
Compatible Substrates & Surfaces:
Metal
Application Method:
E-Coat
ClearClad HSR 415 is built on the HSR platform. When combined with nanoceramics, it becomes a product with a very hard chemical resistant coating.
MG Chemicals
MG Chemicals 843ER Silver Coated Copper Epoxy Paint
Ready-to-Use Product Type:
2K (2 component) Coating, Conductive Coating
Compatible Substrates & Surfaces:
Plastics, Metal, Glass, Ceramic, Wood
Features:
Durable, Chemical Resistant, Good Adhesion, Mar Resistant, Excellent Salt Spray Resistance, Solvent Resistance, Good Scratch Resistance, Abrasion Resistant, Good Smoothness, Electromagnetic Shielding (EMI)
Application Method:
Spray, Brush
Chemical Family:
Epoxy & Epoxy Derivatives
Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.
MG Chemicals
MG Chemicals 422C – Premium Silicone Modified Conformal Coating
Ready-to-Use Product Type:
Conformal Coating, 1K (1 component) Coating
Features:
Thermal Shock Resistant, Wide Temperature Operating Range, Fungus Resistant, Ease of Handling, Corrosion Resistant, Excellent Moisture Resistance, Fast Cure, Excellent Dirt Pick-up Resistance
Application Method:
Dip Coating, Brush, Spray
Chemical Family:
Acrylics & Acrylates, Silicon-based Compounds
422C is a 1-part, acrylic-silicone blend conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in only 10 minutes. It may be removed with appropriate strippers or soldered through for repair or rework. 422C is designed for applications where both high service temperature and flexibility are required. It puts minimum stress on components during thermal cycling, making it ideal for applications that involve a wide temperature range. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.
MG Chemicals
MG Chemicals 844WB - Water-based ESD Safe Coating
Ready-to-Use Product Type:
1K (1 component) Coating, Waterborne Coating
Features:
Fast Drying, Durable, Good Adhesion, Static-Dissipative, Low Odor, Anti-Static, Chipping Resistance, Low VOC, Peel Resistance, Crack Resistant, Excellent Flexibility
Application Area:
Industrial Conveyors
Compatible Substrates & Surfaces:
Painted Surfaces, Plastics, Metal
Application Method:
Roller, Brush, Spray
844WB is a one-part, clear, water-based ESD paint made from a high quality aliphatic polyester urethane latex. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. This non flammable, low odor, low VOC coating is used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures. 844WB can be applied by roller, brush, manual and selective spray equipment.
MG Chemicals
MG Chemicals 841WB - EMF Shielding Paint
Ready-to-Use Product Type:
1K (1 component) Coating, Waterborne Coating, Conductive Coating
Features:
Low VOC, Electromagnetic Shielding (EMI), Odorless, Electromagnetic Interference Shielding, Radio Frequency Shielding (RFI)
Application Area:
Printed Electronics
Compatible Substrates & Surfaces:
Plastics, Wood
Application Method:
Spray, Roller, Brush
EMF Shielding Paint 841WB is a 1-part, water-based conductive paint, pigmented with highly conductive nickel flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 841WB is designed to reduce EMI/RFI interferences in architectural, electric musical and electronics applications.
MG Chemicals
MG Chemicals 843AR-340G - Super Shield Silver Coated Copper Conductive Paint
Ready-to-Use Product Type:
Conductive Coating, Solventborne Coating, 1K (1 component) Coating
Features:
Good Smoothness, Abrasion Resistant, Fast Drying, Electromagnetic Interference Shielding, Radio Frequency Shielding (RFI)
Compatible Substrates & Surfaces:
Plastics
Application Method:
Spray
843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies. 843AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when higher levels of shielding are required.
MG Chemicals
MG Chemicals 419D-P-WH - Overcoat Pen - White
Ready-to-Use Product Type:
Conformal Coating
Features:
Thermal Shock Resistant, Fungus Resistant, Fast Drying, Durable, Solder Resistance, Corrosion Resistant, Excellent Moisture Resistance, Anti-Static, Flexible, Good Smoothness, Excellent Dirt Pick-up Resistance, Prevents Short Circuits, Prevents Static Discharges, Arc Resistant
Chemical Family:
Acrylics & Acrylates
419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.
MG Chemicals
MG Chemicals 838AR-P - Carbon Conductive Pen
Ready-to-Use Product Type:
Conductive Coating
Application Area:
Control Units, Printed Electronics
Compatible Substrates & Surfaces:
Aluminum, Metal, Ceramic, Wood, Plastics
Features:
Corrosion Resistant, Electrically Conductive, Electromagnetic Interference Shielding, Electromagnetic Shielding (EMI), Excellent Substrate Adhesion, Radio Frequency Shielding (RFI), Durable
Chemical Family:
Acrylics & Acrylates, Carbon Blacks
838AR-P pen dispenses an acrylic lacquer pigmented with conductive carbon. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs traces on keyboards, game controllers or remote controls. It is also good for making small connections, such as jumpers, through-holes, bridges, and links. It is great for drawing resistors too, and it can be used to increase the surface area of contacts by painting the area around them. Use this pen when high conductivity is not required. For applications requiring lower resistance, use the 841AR-P Nickel Conductive Pen or the 842AR-P Silver Conductive Pen.
MG Chemicals
MG Chemicals 419D-P-BK - Overcoat Pen - Black
Ready-to-Use Product Type:
Conformal Coating
Features:
Thermal Shock Resistant, Fungus Resistant, Fast Drying, Durable, Solder Resistance, Corrosion Resistant, Excellent Moisture Resistance, Anti-Static, Flexible, Good Smoothness, Excellent Dirt Pick-up Resistance, Prevents Short Circuits, Prevents Static Discharges, Arc Resistant
Chemical Family:
Acrylics & Acrylates
419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.
MG Chemicals
MG Chemicals 419D-P-CL - Overcoat Pen - Clear
Ready-to-Use Product Type:
Conformal Coating
Features:
Thermal Shock Resistant, Fungus Resistant, Fast Drying, Durable, Solder Resistance, Corrosion Resistant, Excellent Moisture Resistance, Anti-Static, Flexible, Good Smoothness, Excellent Dirt Pick-up Resistance, Prevents Short Circuits, Prevents Static Discharges, Arc Resistant
Chemical Family:
Acrylics & Acrylates
419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.
MG Chemicals
MG Chemicals 842UR – Package Level Shielding
Ready-to-Use Product Type:
1K (1 component) Coating
Features:
Corrosion Resistant, Fast Cure, Flexible, Good Toughness, Low Temperature Flexibility, Electrically Conductive, Durable, Good Adhesion, Excellent Substrate Adhesion
Application Method:
Brush, Spray
Chemical Family:
Polyurethanes (PU)
Highly Conductive Silver Coating for EMI Shielding Semiconductor Packages 842UR is a 1-part, heat-cured, silver polyurethane coating. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842UR is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.
Swing Paints
Circa 1850® NU-LUSTRE-CR Casting Resin
Application Area:
Bar Tops, Trays, Tables
Compatible Substrates & Surfaces:
Paper, Ceramic, Coated Surfaces, Leather, Wood, Stone
Features:
High Gloss, Good Thermal Stability
Circa 1850® NU-LUSTRE-CR is a thick, high gloss epoxy Clear Casting Resin. One coat of NU-LUSTRE-CR equals up to 70 coats of varnish. NU-LUSTRE-CR is HEAT-Stable, remaining clear when other epoxies will haze or deform when hot objects are placed upon the surface. It can be applied over newspaper or magazine clippings, photographs, leather, wood, ceramic, rocks, dried flowers, shells and many other items. NU-LUSTRE-CR is the ideal coating for molds, tables, decorated serving trays, coasters and bar tops, and more.
MG Chemicals
MG Chemicals 842ER – Silver Epoxy Paint
Ready-to-Use Product Type:
Solventborne Coating, 2K (2 component) Coating, Epoxy Coating, Conductive Coating
Features:
Good Weather Stability, Chemical Resistant, Corrosion Resistant, Flexible, Electrically Conductive, Mar Resistant, Low Temperature Flexibility, Good Scratch Resistance, Abrasion Resistant, Good Smoothness, Electromagnetic Shielding (EMI), Excellent Substrate Adhesion, High Impact Resistance
Application Method:
Spray, Roller, Brush
Chemical Family:
Epoxy & Epoxy Derivatives
Super Shield™ Silver Epoxy Conductive Paint 842ER is a 2-part silver epoxy conductive paint. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842ER is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.
MG Chemicals
MG Chemicals 838AR – Total Ground Carbon Conductive Coating
Ready-to-Use Product Type:
Conductive Coating, Solventborne Coating, Lacquers, 1K (1 component) Coating
Features:
Durable, Corrosion Resistant, Fast Drying, Abrasion Resistant, Good Smoothness, Electromagnetic Shielding (EMI), Excellent Substrate Adhesion
Application Method:
Spray, Brush
Chemical Family:
Acrylics & Acrylates
Total Ground Carbon Conductive Paint 838AR is an economical conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. 838AR adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides strong corrosion resistance and is suitable for use in marine environments. 838AR is excellent for creating grounded surfaces and in low frequency RFI shielding applications, such as pickup cavities on electric guitars. It is also perfect for shielding metal detectors and other devices where a metal-filled conductive paint would cause malfunction.
MG Chemicals
MG Chemicals 419E – Premium Acrylic Conformal Coating
Ready-to-Use Product Type:
Conformal Coating, 1K (1 component) Coating
Features:
Thermal Shock Resistant, Fungus Resistant, Ease of Handling, Moisture Barrier, Durable, Corrosion Resistant, Anti-Static, Fast Cure, Flexible, Good Smoothness, Excellent Dirt Pick-up Resistance, Excellent Salt Spray Resistance
Application Method:
Dip Coating, Brush, Spray
Chemical Family:
Acrylics & Acrylates
Premium Acrylic Conformal Coating 419E is a 1-part, UL 746E certified, acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.
MG Chemicals
MG Chemicals 842WB - EMI Conductive Paint
Ready-to-Use Product Type:
1K (1 component) Coating, Waterborne Coating, Conductive Coating
Features:
Bondability, Fast Drying, Low VOC, Electromagnetic Interference Shielding, Radio Frequency Shielding (RFI)
Compatible Substrates & Surfaces:
Plastics
Application Method:
Spray, Roller, Brush
EMI Conductive Paint 842WB is a 1-part, water-based conductive paint, pigmented with highly conductive silver flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 842WB is designed to reduce EMI/RFI interferences in architectural and electronic applications.
MG Chemicals
MG Chemicals 842AR-P - Silver Conductive pen
Ready-to-Use Product Type:
Conductive Coating
Application Area:
Control Units, Printed Electronics
Compatible Substrates & Surfaces:
Aluminum, Metal, Ceramic, Wood, Plastics
Features:
Corrosion Resistant, Electrically Conductive, Excellent Substrate Adhesion, Durable
Chemical Family:
Acrylics & Acrylates, Silver & Silver Compounds
Silver Conductive Pen 842AR-P pen dispenses an acrylic lacquer pigmented with highly conductive silver flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications where high conductivity is not required, the 838AR-P Carbon Conductive Pen and the 841AR-P Nickel Conductive Pen provide economical alternatives.
MG Chemicals
MG Chemicals 419D-P-GR - Overcoat Pen - Green
Ready-to-Use Product Type:
Conformal Coating
Features:
Thermal Shock Resistant, Fungus Resistant, Fast Drying, Durable, Solder Resistance, Corrosion Resistant, Excellent Moisture Resistance, Anti-Static, Flexible, Good Smoothness, Excellent Dirt Pick-up Resistance, Prevents Short Circuits, Prevents Static Discharges, Arc Resistant
Chemical Family:
Acrylics & Acrylates
419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.
MG Chemicals
MG Chemicals 844AR Aerosol - ESD Safe Coating for Plastic
Ready-to-Use Product Type:
1K (1 component) Coating, Solventborne Coating
Features:
Fast Drying, Durable, Good Adhesion, Static-Dissipative, Anti-Static, Chipping Resistance, Abrasion Resistant, Low VOC, Peel Resistance, Crack Resistant, Excellent Flexibility, Water Resistant
Application Area:
Industrial Conveyors
Compatible Substrates & Surfaces:
Painted Surfaces, Plastics, Metal
Application Method:
Spray
844AR is a one-part, solvent-based, permanent electrostatic dissipative (ESD) coating. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher. 844AR is commonly used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures.
MG Chemicals
MG Chemicals 843AR – Super Shield Silver Coated Copper Conductive Coating
Ready-to-Use Product Type:
Solventborne Coating, Lacquers, 1K (1 component) Coating, Conductive Coating
Compatible Substrates & Surfaces:
Plastics, Polyvinyl alcohol (PVA), Polybutylene Terephthalate (PBT), Acrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC)
Features:
Good Adhesion, Fast Drying, Abrasion Resistant, Good Smoothness, Electromagnetic Shielding (EMI)
Application Method:
Spray
Chemical Family:
Acrylics & Acrylates
Super Shield™ Silver Coated Copper Conductive Paint 843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. 843AR adheres strongly to most injection- molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies. 843AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when higher levels of shielding are required.
MG Chemicals
MG Chemicals 422B – Silicone Modified Conformal Coating
Ready-to-Use Product Type:
Conformal Coating, 1K (1 component) Coating
Features:
Thermal Shock Resistant, Wide Temperature Operating Range, Fungus Resistant, Ease of Handling, Durable, Corrosion Resistant, Excellent Moisture Resistance, Anti-Static, Flexible, Good Smoothness, Excellent Dirt Pick-up Resistance
Application Method:
Dip Coating, Brush, Spray
Chemical Family:
Blends & Combinations, Acrylics & Acrylates, Silicon-based Compounds
Silicone Modified Conformal Coating 422B is a 1-part, acrylic-silicone blend conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in only 8 minutes. It may be removed with appropriate strippers or soldered through for repair or rework. 422B is designed for applications where both high service temperature and flexibility are required. It puts minimum stress on components during thermal cycling, making it ideal for applications that involve a wide temperature range. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.
MG Chemicals
MG Chemicals 841ER Nickel Epoxy Paint
Ready-to-Use Product Type:
Conductive Coating, Solventborne Coating, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Wood, Plastics, Polyvinyl alcohol (PVA), Metal, Polybutylene Terephthalate (PBT), Acrylonitrile Butadiene Styrene (ABS), Glass, Ceramic
Features:
Durable, Chemical Resistant, Corrosion Resistant, Good Adhesion, Mar Resistant, Excellent Salt Spray Resistance, Solvent Resistance, Good Scratch Resistance, Abrasion Resistant, Good Smoothness, Electromagnetic Shielding (EMI)
Application Method:
Spray, Brush
Chemical Family:
Epoxy & Epoxy Derivatives
Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.
Show
36
of 4,478 results
Go to page
1
2
3
4
5
6
7
8
9
10