Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Attributes
- Creates durable, reliable and conductive traces
- Typical trace width: 1.5–2.0 mm
- Dries in 1 minute at room temperature
- Typical linear resistance: 0.3–0.8 Ω/cm
- Good flexibility
- Strong corrosion resistance
- Does not contain toluene, xylene, or MEK
Applications & Uses
- Markets
- Applications
- Application Area
- Application Instructions
- Shake pen vigorously until the ball moves freely inside.
- Hold pen at angle and depress tip against surface.
- Draw pen across surface while gently squeezing barrel.
- Let dry 1 min before handling or heat cure.
- Clean tip, replace cap and store tip up after use.
Properties
- Physical Form
- Physical Properties
- Typical Properties
- Cured Properties
- Uncured Properties
- Cure Instructions
- Allow to dry at room temperature for 24 hours, or after letting sit for 1 minute, cure the coating in an oven for 30 minutes @ 65 ˚C.
| Value | Units | Test Method / Conditions | |
| Density | 1.83 | g/mL | — |
| Value | Units | Test Method / Conditions | |
| Approximate Linear Coverage (at 65 ˚C) | min. 30 | — | — |
| Calculated VOC | 200 | g/L | — |
| Cure Times | 50 | Minutes | — |
| Cure Times (at 22 ˚C) | 24 | Hours | — |
| Dry to Touch | 1 | Minutes | — |
| Viscosity (at 25 ˚C) | 1 060 | cP | — |
| Value | Units | Test Method / Conditions | |
| Resistivity | 1 x 10⁻⁴ | Ω·cm | — |
| Surface Resistance (at 50 μm) | -40 to 120 | ˚C | — |
| Value | Units | Test Method / Conditions | |
| Solids Content | 58 | % | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Packaging & Availability
- Available Packaging
Cat. No. Packaging Net Vol. Net Wt. 842AR-P Pen 5 mL 9.14 g
Storage & Handling
- Shelf Life
- 3 Years
- Storage
- Store between -5 and 22 ˚C in a dry area, away from sunlight (see SDS).