Products results

Polynt Group 737-8298 is general purpose RTM and infusion for slower cure rate and good profile; higher hdt; good hydrolytic stability. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

SIMONA® PE 100 black 10024795 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Tambour Deck Oil 585-000 is high quality deck oil with special formula for enhanced resistance to water penetration.

Armorflex® 953 SP is flexible NPG with added crack resistance and excellent UV properties. Good resistance to water and osmotic blistering. Low back side tack and easy to spray. Main applications areas are building and construction, home and domestic applications etc.

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Norsodyne® PT-104 - isophthalic resin for pultrusion. Main applications areas are building and construction, industrial sector etc.

UREA-TUFF 4290 is a high solids content, two-component, liquid applied, aliphatic industrial maintenance coating based on new polyurea technology. It can be used as a high solids top coat for many of the polyurea and polyurethane deck coating systems supplied by TUFFLEX Polymers (TUFFLEX). UREA-TUFF 4290 displays a lower level of irritating odors and is formulated with environmentally friendly Oxol-100, resulting in a minty smell.

NORSODYNE® F 16207 AEL - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in filament winding,injection molding,rtm method.

Armor SX5000 WB is a Department of Transportation approved water based Silane-Siloxane water repellent sealer that penetrates deep into the concrete surface where it chemically reacts to form a hydrophobic barrier within the pores. Surfaces sealed with the Armor SX5000 WB are more resistant to the damaging effects of water absorption, such as cracking, spalling, pitting, freeze thaw and salt damage, staining, mold and mildew, and efflorescence. It can be applied to interior and exterior, vertical and horizontal unsealed surfaces.

Norsodyne® 21033 - promoted and non-waxed, good weathering properties, good water resistance.

SKAPS W 1100 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

POLYQuik® P-500 is a two-component aromatic 100% solids sprayable polyurea elastomeric coating with extended working time and high abrasion resistance, possessing high elongation, and resistance to abrasion, corrosion, and a wide range of chemicals. POLYQuik® P-500 can receive a broadcast of aggregate for slip resistance.

NORSODYNE® H 73233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flexibilise rigid resins.

ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

EPL™ 9 is a 100% pure, slow set, self-leveling elastomer.

TS200 is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <700 g/L VOC solvent base. It can be used as a curing agent for newly placed concrete or for sealing existing decorative concrete, pavers, or exposed aggregate. TS200 provides durable protection, superior color enhancement, and high gloss “wet look” appearance. It combats freeze/ thaw, restricts water and moisture, limits dirt buildup and stains, retards mold and mildew, blocks efflorescence, increases surface durability, and reduces scaling and spalling. The TS200 can also be used to mitigate dusting on most existing concrete surfaces. It is also UV resistant and nonyellowing. Solvent base allows for superior adhesion. TS200 has a clear appearance. Upon proper application, the substrate will have a “wet look” with high gloss finish when dry. Color tints are available in a selection of colors.

This reinforcing mat is a continuous-filament product, which is treated with a suitable bonding resin and coupling agent. It has good handling properties, resists wash in the mold, has good porosity, fast wet through, exceptionally good formability, weight uniformity, and uniform strand integrity.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

Stypol® RLPH1410 - low color orthophthalic DCPD blend RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group VUP-2500105WH-22R is used in composites applications.

APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Polycor® 947 Neutral Base have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, 947 series gel coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Polynt’s 947 series gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.

POLYSHIELD HT™ 100F is a fast-set, high performance, spray-applied, plural component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and prepolymers. It provides a cost effective flexible, tough, resilient monolithic membrane with water and chemical resistance.

Gryphin G-2216 Non-Skid is a two-component, heavy-duty epoxy non-skid coating containing a synthetic resinous binder system and abrasive particles. This material was designed for use over Gryphin G-249 Epoxy Primer or Gryphin G-250 Chelating Primer. This system can be used on steel, aluminum or concrete when a heavy-duty non-skid is required. G-2216 Non-Skid features excellent resistance to oils, grease, hydraulic fluids, detergent solutions, salt water, alcohol, gasoline, and most acids. Because of its excellent resistance to wear and extreme temperature changes, G-2216 Epoxy Non-Skid will provide years of service if properly applied.

TUFFLEX Standard Outdoor RBC is a single component, liquid applied, water cured, urethane-polyurea elastomeric waterproofing membrane. TUFFLEX STANDARD OUTDOOR “RBC” can be used as the primary “Non-Gassing” waterproofing base membrane in many of the traffic bearing waterproofing systems manufactured by TUFFLEX Polymers.

AIREX® R82 is a closed-cell, thermoplastic polymer foam that combines outstanding fire resistance with very low smoke and toxicity, along with excellent dielectric properties. It has an outstanding strength to weight ratio, very low moisture absorption, is thermoformable and ductile. AIREX® R82 is an exceptional core material for use in structural lightweight applications that demand high fire resistance, radar transparency or operation in extremely hot or cold environments

KLEER-O-SEAL™ employs nanotechnology and the next generation blend of microscopic VOC compliant chemicals that produce deep penetration in concrete. KLEER-O-SEAL™ reacts below the surface to create a durable seal and allow long-term successful results in all applications including difficult UV and freeze thaw environments.

Polynt Group 255X series gelcoats are formulated specifically for the fiberglass industry where reduced flame propagation properties are needed. Its specific formulation results in a unique hardness that helps to prevent graffiti and scratches. 255X series gelcoats are designed for interior application. Because of the special additives that improve hardness and decrease the flame spread, 255X series are not recommended for parts used under direct sun exposure or prolonged water immersion.

Polynt Group HUP 16/25 RN-Decor is generally used in building and construction, cosmetics, foundries, peroxides applications.

CRACKBOND® V120 LO-MOD is a two-component, moisture insensitive, high strength epoxy healer/sealer deck penetrant designed to prolong the life of concrete by sealing cracks against moisture and preventing chloride ion intrusion. It may be successfully applied and cured at temperatures between 60°F and 95°F (16°C and 35°C).

Polydyne® 6084 - orthophthalic resin for roof tiles, promoted, medium viscosity and with UV absorber. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

Stypol® 040-4956 is clear MACT compliant NPG isophthalic gel coats. They have been designed for use in the manufacturing of cultured marble, onyx, and granite.

NORSODYNE® Y 93172 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.