Products results

AL170 is used as an adhesion promoter at organic/inorganic interfaces, as a surface modifier (e.g. imparting water repellency, hydrophilic surface adjustment or for crosslinking of polymers).

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

BindEX E-165 is a modified linear low density polyethylene adhesive resin designed for use in adhesive film for making Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer which faces aluminum sheet during lamination process. It can be processed on normal extruders used for processing of polyethylenes.

SR3604-35 is an aromatic polyamide-imide solution which can be utilized for producing coatings where excellent chemical and thermal resistance is required.

Mavcoat® CRW-2 is a water-based, V.O.C. free emulsion formulated for the release of concrete, GFRC, GRC, and composite reinforced concrete from molds made of steel, polyurethane, RTV silicone, rubber, epoxy, and fiberglass. Mavcoat® CRW-2 will not separate, so no mixing before use is needed.

Progressive Fillers International offers a solution to the industrial standard dark color of conductive and anti-state applications by offering a radiant shine to conductive additives, the CSL lines are conductive synthetic flakes with an adjustable specific gravity and density to fit the project. Having full control designing the weight, dimensions and over all parameters of the flake gives the customer full control over their original design and cost.

NOVIS P-492 is a high flow maleic anhydride grafted Polypropylene material. Presence of maleic anhydride moieties on PP chains make NOVIS P-492 significantly polar versus plain PP. This makes it useful as adhesion promotor when added to a polyolefin based hot melt composition. Being a low molecular weight polymer, it blends well with other ingredients in the composition. NOVIS P-492 is a polymer with narrow molecular weight distribution, which can impart higher mechanical strength compared with that provided by conventional waxes.

Aminoethylaminopropyltrimethoxysilane (technical grade). Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

Progressive Fillers International offers a solution to the industrial standard dark color of conductive and anti-state applications by offering a radiant shine to conductive additives, the CSL lines are conductive synthetic flakes with an adjustable specific gravity and density to fit the project. Having full control designing the weight, dimensions and over all parameters of the flake gives the customer full control over their original design and cost.

Conductive Silver Spheres (CHS) are highly conductive, low density, spherical powders and particles with a dry bulk resistivity of .001 ohms/cm. Offering seamless electrical continuity of pure silver at a fraction of the cost and weight. The CHS additives are noticeably lighter than solid silver in paints, Composites and adhesive, while providing excellent conductivity, the low particle density of the CSGS and large surface area facilitates slow phase separation in paints and adhesives compared to heavy metallic and organic fillers. The CHS also works well when used as catalysts, laser fusion targets, and electrically conducting bond line spacers in advanced electronics and other applications. The CHS additives are engineered for high conductivity and shielding electromagnetic interference while improving the applications impact strength. The spheres can be customized from size to silver % to fit the application.

USI Chemical Silane USi-1301 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties - such as flexural strength, tensile strength and modulus of the composites. The silane also has its application as an adhesion promoter in formulations and primers & reduces the filler's sedimentation tendency in the uncured polymer. USi-1301 also greatly increases water (vapor) and corrosion resistance.

These PTFE powders are Natural Prime PTFE micronized to various particle sizes and are FDA compliant for applications requiring food contact. MicroFLON 1433FG is designed for food contact applications. These applications include: food processing, machine parts, and medical devices.

BactiBlock® 920 B0 is an antimicrobial additive suitable to be used in a broad variety of materials by compounding such as polyolefins and other polymers.

Mavcoat® KCP contains unique additives for high slip and is used for difficult-to-release parts in the most demanding applications. Mavcoat® KCP is fast evaporating, solvent-based, and semi-permanent capable of releasing all thermoset composites. It is a quick-cure, fast evaporating, semi-permanent mold release coating for the release of reinforced polyester and vinyl-ester resins. Upon evaporation and cure, parts demold with a high gloss finish.

Conductive Silver Spheres (CSGS) are highly conductive, low density, spherical powder and particle with a dry bulk resistivity of .001 ohms/cm. Offering seamless electrical continuity of pure silver at a fraction of the cost and weight. The CSGS additives are noticeably lighter than solid silver in paints, composites and adhesive, while providing excellent conductivity, the low particle density of the CSGS and large surface area facilitates slow phase separation in paints and adhesives compared to heavy metallic and inorganic fillers. The CSGS also works well when used as catalysts, laser fusion targets, and electrically conducting bond line spacers in advanced electronics and other applications. The CSGS additives are engineered for high conductivity and shielding electromagnetic interference while improving the applications impact strength.

USI Chemical Silane USi-2301 improves both adhesion to the substrate and mechanical properties such as flexural strength, tensile strength and modulus of elasticity.

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

Ureido silane used as a coupling agent in a wide range of applications for adhesives, sealants, coatings, foundry and fiber glass, etc. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Conductive Silver Spheres (CSGS) are highly conductive, low density, spherical powder and particle with a dry bulk resistivity of .001 ohms/cm. Offering seamless electrical continuity of pure silver at a fraction of the cost and weight. The CSGS additives are noticeably lighter than solid silver in paints, composites and adhesive, while providing excellent conductivity, the low particle density of the CSGS and large surface area facilitates slow phase separation in paints and adhesives compared to heavy metallic and inorganic fillers. The CSGS also works well when used as catalysts, laser fusion targets, and electrically conducting bond line spacers in advanced electronics and other applications. The CSGS additives are engineered for high conductivity and shielding electromagnetic interference while improving the applications impact strength.

BindEX E-186 is a maleic anhydride modified metallocene based linear low density polyethylene. With advanced anhydride grafting technology, this grade creates superb adhesion to EVOH, PA and PE, while maintaining excellent process ability.

Progressive Fillers International offers a solution to the industrial standard dark color of conductive and anti-state applications by offering a radiant shine to conductive additives, the CSL lines are conductive synthetic flakes with an adjustable specific gravity and density to fit the project. Having full control designing the weight, dimensions and over all parameters of the flake gives the customer full control over their original design and cost.

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

MB-80 is an adhesive resin based on modified polyethylene. It can be used to produce a three-layer low temperature adhesive film, for manufacture of Aluminum Composite Panels (ACP). The chemical modification provides excellent adhesion to both polyethylene and aluminum substrates. It is preferably used as outer layer in 3- layer coextruded blown film structure. It is this layer with MB-80, which faces aluminum sheet during ACP manufacturing process. It can be processed on normal extruders used for making 3-layer polyethylene films.

Mavcoat® EP-111 is considered the workhorse in the industry. It is a semi-permanent, water-based, non-silicone coating that yields a matte finish with excellent cosmetics. The surface is free of porosity and pinholes. There is little to no transfer making for superior adhesion of paint, print, or decals. It is good for high volume production where release is applied to hot molds and yields multiple releases with a single application.

Epoxy functional silane used as a coupling agent for unsaturated polyester-fiberglass composites, and for polysulfide/polyurethane caulks & sealants. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

S-400 HQ is a micronized ethylene-bis-stearamide (EBS) wax powder. Shamrock’s S-products are micronized waxes that provide rub and abrasion resistance. Included in this line are products that provide controlled slip, gloss reduction, matting, and clarity in a range of particle sizes.

Mavcoat® EM is a ready-to-use, water-based system for high-volume production where application to hot molds is made frequently because a semi-permanent coating is not wanted or needed. Mavcoat® EM produces a glossy surface finish on all thermoset composite systems.

OPTIM® P-408 is a maleic anhydride modified homopolymer polypropylene. The grafting operation of the polypropylene backbone is achieved using a new technology that allows high grafting efficiency and low polymer scission.

Progressive Fillers International offers a solution to the industrial standard dark color of conductive and anti-state applications by offering a radiant shine to conductive additives, the CSL lines are conductive synthetic flakes with an adjustable specific gravity and density to fit the project. Having full control designing the weight, dimensions and over all parameters of the flake gives the customer full control over their original design and cost.

OPTIM® E-151 is a maleic anhydride modified polyethylene with additional ester groups. It is used as compatibilizer between polar and non-polar polymers. It also acts as coupling agent to improve adhesion of mineral fillers and polymer matrix.

AL T-99 TEOS is high purity tetraethyl orthosilicate (TEOS) monomer.

AL151 is a clear, colorless, strongly alkaline liquid with smell and being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. AL151 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or as a moisture crosslinker of silicone polymers. The application as “coupling agent” leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture.