Products results

P4G4A-053 is a Homopolymer used for Injection Molding. It is produced with Phthalate free Catalyst Systems.

Sylvin Technologies Sylvin™ 8445-90FUV Natural is a vinyl / nitrile rubber compound formulated for molding or extrusion applications that require a antimicrobial and a ultra violet stabilizer.

E-Fiberglass Warp Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Longitudinal (Warp Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high longitudinal and shear strength and stiffness, and some transverse strength. Ideal for laterally loaded panels with aspect ratio from 1 .5 to ∞. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.

Sylvin™ 4299-95 Natural is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

KURARAY POVAL™ 32-80 by Kuraray is a biodegradable and recyclable polyvinyl alcohol (PVOH) having varying degree of polymerization and hydrolysis. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It has good bonding strength and pigment binding capacity because PVAs have good cohesion and good adhesion to fibers, fillers as well as pigments. It possesses excellent film forming characteristics, high tensile strength and elasticity, as well as resistance against organic solvents and dispersing power. It is used in a similar manner as natural products such as casein as well as starch and its degraded derivatives (for example dextrin) as raw material to produce aqueous adhesive solution. For the modification of aqueous adhesives its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, increase of the setting speed and influence on the rheology. KURARAY POVAL™ 32-80 is used in producing silicon-based paper that are further used as release paper for PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry and films applications.

Domamid® 6G50 is polyamide 6, 50% glass fiber reinforced, is used for injection molding.

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for low coefficient of friction requirements.

A hard, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Chengdu Dowhon Industry FD-251C is Excellent flow and mold release.

Bulk Chemical Services (BCS) 4903 is a alternate CTA, Mid-range molecular weight Sodium Polyacrylate.

Texalan® 390A This product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high pressure resistance, and Flexibility.

Dynacast Industrial Products Ethylene-Propylene Diene Monomer - EPDM is excellent for water and steam applications. EPDM is similar to Styrene Butadiene Rubber (SBR) but has improved resistance to atmospheric aging, heat oxidization and ozone up to about 150C. Ethylene Propylene Diene Monomer has excellent electrical properties and good chemical resistance.

VAL-TEX 700+FTFE synthetic, biodegradable lube sealant is suitable as a multi-purpose emergency lube sealant. It is resistant to natural gas, mineral oils, light hydrocarbons, LPG's, most aromatics, water, instrument air, H2S, and CO2. Moly-disulfide helps to reduce valve operating torque. It is designed as an emergency sealant containing blended particles of Polytetrafluoroethylene. Intermingling of Val-Tex 700+FTFE and other lubricants or sealants will not have an adverse affect.

Sylvin™ 8915-72 White 1217-1 is a vinyl compound formulated for profile extrusion applications.

Econamid® FL 6G30 is polyamide 6, 30% glass fiber reinforced, is used for injection molding.

Sylvin™ 9778-75 Natural is a vinyl compound for injection molding applications.

Sylvin™ 83037-80 Natural is a vinyl compound formulated for general purpose extrusion or molding applications. This compound is reach and RoHS compliant.

Shandong Xuye New Materials CM235 has low mooney viscosity, good process flow ability, low hardness, which is widely used in many rubber areas.

NYLOY® MG-0050N has a heat resistance with high stiffness and dimensional stability.

PlastCure 40 PE is a strong free radical source used to cross-link polyethylene and modify MFI of polypropylene.

Nilit NILAMID® B3 GCF2006 is a Polyamide 6 (Nylon 6) compound, 20% glass fiber and carbon fiber reinforced.This compound is intended for injection molding.NILAMID® B3 GCF2006 is primarily designed for the Automotive industry. It is also suitable for Industrial & Consumer applications.

McLube® 857 is a highly lubricious release emulsion in water. Ideal for epoxy and some polyurethane applications. Cured when dry at room temperature.

Sylvin™ 4200-88 Black is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

Nylene Duratel MF27 is an unreinforced high-flow acetal co-polymer. Duratel MF27 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF27 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

Its specificity are suitable for extrusion products with great surface appearance. Suitable for printing process and food packages. Its great impact strength and stability are suitable for large piece products.

NIRETAN B 30 N is regionally available in Europe.

Sylvin Technologies Sylvin™ 802-88 Green 3185 is a vinyl compound formulated for profile extrusion applications. This compound meets the requirements of ul sublect 1581, 720 hour sunlight resistance test.

Starbetter Chemical Materials Anhydrous Zinc Borate ST-FS-2300FB is a dehydrated zinc borate with multifunctional applications in a variety of polymers. Since it contains no water of hydration, it is stable up to 600°C. Therefore, it can be used in polymer systems requiring very high processing temperatures.

Sylvin™ 6045E Black is a vinyl compound formulated to meet ASTM D922 grade a.

Sylvin™ 8621-80 Clear is a vinyl compound formulated for extrusion applications that require less volatility that our general purpose grade.

Sylvin™ 4200-85 White 1524 is a vinyl compound formulated with a non ortho phthalate plasticizer for extrusion or injection molding applications.

GLS Polymers PP 10 TALC PRECOLOR YT02is Filled with 10%TALC PRECOLOR.

Domamid® 66G33 is polyamide 66, 33% glass fiber reinforced, is used for injection molding.

RichardsApex V-46BR is a low viscosity polar lubricant, that when allowed to dry will leave a non tacky residual film. RichardsApex has specialized in custom formulating evaporating oils and solvent based lubricants for many years. This series has gained wide acceptance where minimal lubricity is required and a controlled residual film is desired.

kazanorgsintez HDPE PE2NT76–17 is High Density Polyethylene grade used for various applications.