Products results

Andifil AS 200 is a medium surface fumed silica which imparts a significant increase in viscosity in liquid systems, free flow of powders and reinforcement of silicone and organic rubbers.

Casastab™ T is a thickening agent for latex compounds. It is recommended particularly where a moderate increase in viscosity is required, for example in dipping compounds and adhesives.

OPTIPETTM 214P is a chain extending oligomer for polyamides. It functions by reacting with end-groups of scrap polyamide, such as nylon 6 & nylon 66, and enhance their properties by effectively increasing molecular weight of the reprocessed material.

Santicizer® 375 is a viscosity modifier for use in PVC plastisols or organosols. This product is fugitive during any open heating processing, so it will be predominately absent in the finished good. The material can help compensate for viscosity rise that is a common shelf life problem for plastisols using fast fusing plasticizers. Additionally, Santicizer® 375 can allow for case hardening in applications that require surface rigidity.

Technical grade Ammonium Acetate is used in the textile dying as a mordant in dyeing of wool, silk, acrylics, nylon). It is also used in the surface treatment of metals and as a gelling agent in production of rubber latex. Furthermore it is also used in the production of gel foam carpet backing.

NOVIS P-390 is a free radical modifier for polypropylene melt flow index. It is specifically used to improve the MFI of highly filled PP compounds.

Pepton® 44T Prills is a dust free, prill form peptiser which offers handling and environmental improvements over conventional powdered peptisers.

AL FS-300 hydrophilic fumed silica with its smaller primary particle size makes it more suitable for transparent and semi-transparent systems. Fumed silica’s unique manufacturing process produces a very high purity type of silica with nano size primary particles, a fluffy white powder that is an amorphous and form of silica. These characteristics impart a wide range of benefits to formulations from thickening and reinforcement to free flow and anti-settling.

Mosselman Sorbitan Monooleate 10 EO (9005-65-6) are obtained by the ethoxylation of sorbitan esters. They are more hydro-philic than the sorbtanesters itself and are used as non-ionic surfactants and solubilizers for water insoluble active products and essential oils. In combination with the non-ethoxylated sorbitanesters, they can be used as emulsifiers for oil in water emulsion. Ethoxylated sorbitanesters find applications in cosmetics, detergents, lubricants, textile auxiliaries agrochemicals, etc.

Mosselman Sorbitan Monolaurate 20 EO - Food Polysorbate 20 (9005-64-5) is a bio-based emulsifying agent that is ideal for use in various industries such as chemical manufacturing, textiles manufacturing, water treatment, and more. It offers excellent detergency and emulsifying properties, making it suitable for use in industrial and home care applications. The product has a lemon to amber-colored oily liquid appearance and is compatible with polymers and resins such as Polyvinyl Chloride (PVC).

Mosselman Sorbitan Tristearate (26658-19-5) are non-ionic emulsifiers obtained by the esterification of dehydrated sorbitol with fatty acids. These esters are mostly water in oil emulsifiers, but they can also act as oil in water emulsifiers when they are used in combination with the ethoxylated sorbitanesters.

Filled Silicone Vinyl-terminated Compound

BRUGGOLEN® M1417 is our modifier for both chain build-up and chain disintegration. For example, with its “chain shortener”, the molecular weight of highly viscous polyamide wastes can be transformed into high-performance injection molding types, whose mechanical properties correspond to those of off-the-shelf new injection molded types of the same viscosity. Cost advantages included. BRUGGOLEN® M1417 - Chain Breaking Agent for the recycling of High Viscous Polyamide Waste Controlled and reproducible reduction of molecular weight: Exact adjustment of the relative viscosity to specified target values Upcycling to injection molding grades Generating flow properties and mechanical performance comparable to that of prime material Allowing cost advantages through the usability of scrap and waste material due to the reuse of waste material enabling recycling of cast nylon waste

Pharmaceutical grade Ammonium Acetate is used in the manufacture of insulin and penicillin as well as in chromatography. Technical grade Ammonium Acetate is used in the dyeing and printing of textiles, in surface treatment of metals and as a catalyst in rayon fiber productions. Ammonium Acetate is available as fine white crystals, or as a 50% or 57.5% solution in water.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

Filled Silicone Vinyl-terminated Compound

NOVIS P-490 is an Isotactic low molecular weight polypropylene with enhanced flow properties. Melting point and most of its mechanical properties are similar to conventional PP. It is its low molecular weight and narrow molecular weight distribution which impart NOVIS P-490 high melt flow rate.

Mosselman 2-ethylhexyl Tallowate (68648-21-5) tallowate is considered as a cost effective alternative to other 2-ethylhexyl esters.

Mosselman Sorbitan Monolaurate (1338-39-2) are non-ionic emulsifiers obtained by the esterification of dehydrated sorbitol with fatty acids. These esters are mostly water in oil emulsifiers, but they can also act as oil in water emulsifiers when they are used in combination with the ethoxylated sorbitan esters. Sorbitan esters are used in cosmetics, lubricants, textiles etc.

OPTIPETTM-213P is a chain extending oligomer for polyesters. It functions by reacting with end-groups of PET scrap and enhance properties by effectively increasing molecular weight of the reprocessed material.