Brands results

ECOTINT® Premium is a unique selection of 20 high performance organic and inorganic colorants which can be combined to form a flexible customized POS tinting system. These colorants are perfect for exterior paints and plasters to cover the full color spectrum.

P50™ is a metalized diamond like carbon based proprietary coating.

SPEC-ROCK is a high build, inorganic glazed system for interior walls and ceilings. It is available in a wide range of colors in gloss, semi-gloss and low sheen finish. Decorative effects such as spotting are also available.

The REFLEX™ Natural pearl series is based on a natural-mica-based substrate. This series is coated with titanium dioxide, iron oxide or a combination of both, and provides high luster, high chroma, opacity and excellent batch consistency. This series includes various products and particle sizes for general purpose applications.

FireBinder is a powdered natural resin added to waterproofing formulations for the packaging of fireworks and signal cartridges. The main ingredient for this plant-based product is obtained from a native Brazillian tree, the Parana Pine.

Bio-San is a uniquely designed admixture for integral, long-term protection of concrete in harsh sewage conditions with levels of H2S that cause microbial induced corrosion (MIC). Bio-San C500 combines potent antimicrobial protection along with the unique crystalline technology of the Xypex Admix C-Series.

CarboGasket is a powdered thermoplastic natural resin with high bonding capabilities for solvent-based gasket sealant formulations.

St. Louis Group offers a wide range of highly effective liquid & powder phosphorus based flame retardants. Specialty dispersions, blends, and masterbatches are available upon request.

Abocoat 8501-1™ is a Coating with Exceptionally High Resistance To Acids, Alkalis, Solvents, Acetone, Alcohol, & Gasohol. High Solids 2-Component, Fast-Setting Epoxy System.

Polyvinylidene fluoride shows a higher tensile strength, pressure resistance and dimensional stability than the related PTFE, but friction and insulation properties are lower. PVDF has a high mechanical strength and toughness at lower temperature and it’s self-extinguishing. The operating temperature ranges from -30 °C to +150 °C. PVDF shows a high resistance to chlorine, bromine and high-energy radiation.

Fluorinoid® register, based on elastomer, PTFE and thermoplastic technologies includes over 500 materials that offer exceptional characteristics enabling them to operate in demanding environmental conditions at temperatures to over 300°C.

WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water paint, printing ink or adhesive. WONDERWET™ IV is particularly effective in improving the wet edge or open-time of Low- and Zero-VOC flat and non-flat paints and coatings when glycols and other solvents have been replaced or reduced. WONDERWET™ IV will improve the flow, leveling and appearance of a given paint.

Water Absorbent Latex Polymer Liquid is used for increased durability in concrete, mortars, underlayments, thin set mortars, resurfacing mortars or sealing dusty floors. Apply as an admixture or brush for sealing. Latex Polymer Liquid is a milky white color and dries clear and absorbs water.

Polikim Kestamid®(PA6G-Cast Nylon) is one of the most commonly used engineering plastics.

Georgia-Pacific Chemicals is the North American distributor for the Curaphen brand.

IMAGIFINE pigment pastes are high strength, pourable pigment dispersions, specifically formulated for in-plant tinting of emulsion and water-based or aqueous paints & aqueous inks. IMAGIFINE pigment pastes are cost economic alternatives to commonly used, high concentration aqueous dispersions containing high quality pigments in respect to light fastness, temperature and chemical resistance. IMAGIFINE pigment pastes use a minimal of additives to ensure that these dispersions interfere as little as possible with the chemistry of customer products. IMAGIFINE pigment pastes are standardized with respect to color strength on a weight basis. Pigment loading may vary from color to color.

IrisECO is our series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications.

SureTac is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

https://neyra.com/products/crack-fillers-primers-paint/

A1 Primecoat is a surface tolerant, two-component, multi-purpose primer (barrier coat). Formulated for high film build and long-term protection from salt/fresh water, as well as a wide variety of chemical exposures. Exceptional corrosion protection with advanced rust inhibitors. Excellent adhesion to tight rust. Fine adhesion to damp surfaces. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.

MAKROCLEAR provides designers, specifiers, and architects with possibilities to use transparent polycarbonate sheets in applications where high clarity and optical performance is required.